The river—An unresolved obstacle

The paper discusses the problems associated with the operation of vehicles in and near waterways. The problem will be better understood when world-wide river survey data become available. However even in areas where such data is available amphibious and wading craft often encounter impassable banks. This indicates that dramatic improvements in vehicle egress capabilities are required.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

Recoil in macromolecular solutions according to rigid dumbbell kinetic theory

A macromolecular solution is represented by the simple model of rigid dumbbells suspended in a Newtonian fluid with Brownian motion included. Hydrodynamic interaction is not taken into account. It is found that for this model there will be recoil after the cessation of steady shearing flow. The ultimate shear recovery S _∞ is developed as a power series in κ^?, the shear rate prior to the cessation of the steady shear flow: $$S_\infty = (\theta _0 /2\eta _0 ) \kappa ^\user1{ - } + O(\kappa ^\user1{ - } )^3$$ where η₀ and θ₀ values of the viscosity and primary normal stress functions respectively at zero-shear rate. The coefficient of the term in (κ^?)³ is calculated. In addition, the behavior of the normal stresses during the recoil process is found; during recoil τ₂₂?τ₃₃ has the opposite sign from τ₁₁?τ₂₂.     

Slow viscoelastic radial flow between parallel disks

A perturbation analysis is presented for the steady-state radial flow of a third-order fluid between two parallel disks. The results include previous perturbation analyses in which various other rheological models were used. The pressure drop needed to maintain the radial flow is less than that for the Newtonian creeping-flow solution because of fluid inertia and shear-thinning viscosity, whereas the normal stresses have the opposite effect. Possible use of the “radial flow viscometer” for experimental evaluation of second-order constants is also discussed. Finally, molecular stretching in the flow system is examined using the elastic dumbbell model for a polymer molecule.     

Polymer contribution to the thermal conductivity and viscosity in a dilute solution (Fraenkel Dumbbell model)

The phase-space kinetic theory for polymeric liquid mixtures is used to obtain an expression for the polymer contribution to the thermal conductivity of a nonflowing, dilute solution of polymers, where the polymer molecules are modeled as Fraenkel dumbbells. This theory takes into account three mechanisms for the energy transport: diffusion of kinetic energy (including the Öttinger-Petrillo term), diffusion of intramolecular energy, and the work done against the intramolecular forces. This paper is an extension of previous developments for the Hookean dumbbell model and the finitely-extensible dumbbell model. A comparison among the dumbbell results suggests that the thermal conductivity increases with chain stiffness. In addition, the zero-shear-rate viscosity and first normal-stress coefficient are also given for the Fraenkel dumbbell model.Dedicated to Prof. John D. Ferry on the occasion of his 85th birthday.     

Microwave and UV excitation spectra of 4-fluorobenzyl alcohol at high resolution. S0 and S1 structures and tunneling motions along the low frequency -CH2OH torsional coordinate in both electronic states

Rotationally resolved electronic spectra of several low frequency vibrational bands that appear in the S(1) ← S(0) transition of 4-fluorobenzyl alcohol (4FBA) in the collision-free environment of a molecular beam have been observed and assigned. Each transition is split into two or more components by the tunneling motion of the attached -CH(2)OH group. A similar splitting is observed in the microwave spectrum of 4FBA. Analyses of these data show that 4FBA has a gauche structure in both electronic states, but that the ground state C(1)C(2)-C(7)O dihedral angle of ～60° changes by ～30° when the photon is absorbed. The barriers to the torsional motion of the attached -CH(2)OH group are also quite different in the two electronic states; V(2) ～ 300 cm(-1) high and ～60° wide in the S(0) state, and V(2) ～ 300 cm(-1) high and ～120° wide (or V(2) ～ 1200 cm(-1) high and ～60° wide) in the S(1) state. Possible reasons for these behaviors are discussed.     

Normal stress differences in large-amplitude oscillatory shear flow for the corotational ��ANSR�� model

Using the integral form of a nonlinear corotational model, we derive explicit analytical expressions for the zeroth, second, and fourth harmonics of the second normal stress difference in large-amplitude oscillatory shear (LAOS). This model yields an arbitrary normal stress ratio (ANSR) in any simple shearing deformation, including LAOS. This corotational ANSR model adds one parameter to the corotational Maxwell model, a time constant ?? ₀ controlling the ratio ??₂/??₁ for both the real and imaginary parts of each harmonic of the normal stress difference. The explicit analytical expressions for all harmonics of the alternating shear stress and first normal stress difference responses in LAOS match those obtained previously for the corotational Maxwell model. We evaluate the corotational ANSR model for the case of a single Maxwell relaxation time fluid.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Polarisation characteristics of a 12 fibre coupler under femtosecond pulsed and continuous wave illumination

We report on the experimental investigation carried out in the polarisation characteristics of femtosecond pulsed and continuous wave beams propagating through a 1×2 fibre coupler. It is demonstrated that the polarisation states of pulsed and continuous wave illumination over the broad wavelength range can be preserved in a conventional fused fibre coupler. Furthermore, the fibre coupler acts as a low-pass spectral filter in the visible wavelength range with a splitting ratio between 99.6/0.4 and 99.7/0.3. The result is of importance for fibre-optic second harmonic generation microscopy which requires the polarisation preservation to extract molecular organization of a sample.