Effect of radiation dose on the thermal decomposition of sodium bromate

Influence of radiation dose in the range of 0.5–2.0 MGy of⁶⁰Co -rays on the isothermal decomposition of sodium bromate at 633.0 K shows that irradiation increases the initial gas evolution {ie37-1}, shortens the induction period (I), enhances the rate of reaction in the accelerating and decay stages. The data fit well the Prout-Tompkins relationship, indicating that nucleation occurs in a chain branching manner during the process. The fraction decomposed, , increases with increasing radiation dose.     

Global variations in peak bone mass as studied by dual-energy X-ray absorptiometry

In 1994, the International Atomic Energy Agency (IAEA) initiated a 5-year Co-ordinated Research Project (CRP) to determine geographical and racial differences in peak bone mineral density (BMD) in men and women aged 15-49 years. The study demonstrates that there are distinct global differences in BMD at the hip and spine in both men and women approximating to one population standard deviation between populations with the highest and lowest BMD. These differences persist following adjustments for age, sex and body size. Such information is valuable in understanding the reasons for global differences in fracture rate and predicting future trends in fracture incidence. This revised version was published online in August 2006 with corrections to the Cover Date.     

LC–MS Simultaneous Determination of Itopride Hydrochloride and Domperidone in Human Plasma

A rapid, simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for simultaneous quantification of itopride hydrochloride and domperidone in human plasma. Both drugs were extracted by liquid–liquid extraction with ethyl acetate and saturated borax solution. The chromatographic separation was performed on a reversed-phase C18 column with a mobile phase of water–methanol (2:98, v/v) containing 0.5% formic acid. The protonated analyte was quantitated in positive ionization by multiple reaction monitoring with a mass spectrometer. The assay exhibited linearity over the concentration range of 3.33–500 ng mL^?1 for itopride hydrochloride and 3.33–100 ng mL^?1 for domperidone in human plasma. The precursor to product ion transitions of m/z 359.1–72.3 and 426.0–147.2 were used to measure itopride hydrochloride and domperidone respectively. The method was found suitable for the analysis of plasma samples collected during phase 1 pharmacokinetics study of itopride HCl 50 mg and domperidone 20 mg in 12 healthy volunteers after single oral doses of the combination drug.     

Simulation of Fibrillation of PC/LCP/Kevlar Blends and Its Characterizations

Kevlar fiber was fluorinated and oxy-fluorinated directly in presence of undiluted fluorine and fluorine gas mixture and processed with Polycarbonate and LCP at 320 °C under 20 rpm in a twin-screw extruder. The composites were then injection molded into dumbbell shaped specimens under different conditions like various mold temperatures, injection temperatures, injection speeds and mold filling rates. Various physico-chemical characterizations have been performed under definite processing parameter. Orientation of fibers under different injection parameters was evaluated using mold flow simulation technique. Most injection molded or extruded structures however, exhibit non-uniform fiber orientation across the final parts, with a diverging variety of different local fiber orientation states. Distinct skin and core regions were observed in the injection molded parts and it has also been found out that fiber orientation is different in skin and core region for both unmodified and modified derivative, which affects the flow behavior. Processing parameters significantly affect the fiber orientation pattern in the skin and core region for all blended materials. It is worth mentioning that the maximum fiber orientation occurred during the extrusion process at the wall but different extent of fiber orientation is observed during the injection molding depending on the shape of the dumbbell specimen. This fibrillation has been corroborated by the SEM study in both the skin and core region.     

Synthesis and Structural Characterization of New Divanada‐ and Diniobaboranes Containing Chalcogen Atoms

The reaction of [Cp_nMCl_4?x] (M=V: n=2, x=2; M=Nb: n=1, x=0; Cp=η⁵‐C₅H₅) with LiBH₄ ? THF followed by thermolysis in the presence of dichalcogenide ligands E₂R₂ (E=S, Te; R=2,6‐(tBu)₂‐C₆H₂OH, Ph) and 2‐mercaptobenzothiazole (C₇H₅NS₂) yielded dimetallaheteroboranes [{CpV(μ‐TePh)}₂(μ₃‐Te)BH ? thf] ( 1 ), [(CpV)₂(BH₃S)₂] ( 2 ), [(CpNb)₂B₄H₁₀S] ( 3 ), [(CpNb)₂B₄H₁₁S(tBu)₂C₆H₂OH] ( 4 ), and [(CpNb)₂B₄H₁₁TePh] ( 5 ). In cluster 1 , the V₂BTe atoms define a tetrahedral framework in which the boron atom is linked to a THF molecule. Compound 2 can be described as a dimetallathiaborane that is built from two edge‐fused V₂BS tetrahedron clusters. Cluster 3 can be considered as an edge‐fused cluster in which a trigonal‐bipyramidal unit (Nb₂B₂S) has been fused with a tetrahedral core (Nb₂B₂) by means of a common Nb₂ edge. In addition, thermolysis of an in‐situ‐generated intermediate that was produced from the reaction of [Cp₂VCl₂] and LiBH₄ ? THF with excess BH₃ ? THF yielded oxavanadaborane [(CpV)₂B₃H₈(μ₃‐OEt)] ( 6 ) and divanadaborane cluster [(CpV)₂B₅H₁₁] ( 7 ). Cluster 7 exhibits a nido geometry with C_2v symmetry and it is isostructural with [(Cp*M)₂B₅H_9+n] (M=Cr, Mo, and W, n=0; M=Ta, n=2; Cp*=η⁵‐C₅Me₅). All of these new compounds have been characterized by ¹H NMR, ¹¹B NMR, and ¹³C NMR spectroscopy and elemental analysis and the structural types were established unequivocally by crystallographic analysis of compounds  1 – 4 , 6 , and 7 .     

Effect of dispersion on the diffusion zone in two-phase laminar flows in microchannels

Aim of the present work is to investigate the reaction–diffusion process of a two species system under laminar flow in a T-shaped microchannel. A zone formed at the interface between the aqueous solutions of these two species is affected by advection and diffusion. Through theoretical analyses and experimental results, the effect of dispersion has been shown to influence this diffusion zone. We have defined a parameter called effective diffusivity, to account for the dispersion effects and observed it to be a function of the channel Peclet number. In the limiting case of low Peclet number, this parameter is constant and turns out to be equal to the molecular diffusivity. We have also related effective diffusivity and the dispersion coefficient through scaling estimates.     

Domino "[3+3]-cyclization-homo-Michael" reactions of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes

The Lewis acid mediated domino "[3+3]-cyclization-homo-Michael" reaction of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes allows an efficient one-pot synthesis of functionalized salicylates containing a halogenated side chain. A great variety of substitution patterns could be realized by variation of the starting materials and of the Lewis acid. The mechanism of the domino process was studied.     

A simplified green chemistry approach to the Biginelli reaction using ‘Grindstone Chemistry’

Grindstone Chemistry--a greatly evolved version of Toda’s method of grinding solids together for solvent-free chemical reactions--has been described and its usefulness illustrated by the successful application of this technique to a simplified process for conducting the multi-component Biginelli reaction for the synthesis of physiologically active tetrahydropyrimidinones.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of chelate ring size on the stability of a [Cu(II)-NO] intermediate

Three copper(II) complexes, 1, 2, and 3 with L(1), L(2) and L(3) [L(1) = 2-(2-aminoethyl)-pyridine; L(2) = 2-(N-ethyl-2-aminoethyl)-pyridine; L(3) = 3,3'-iminobis(N,N-dimethylpropylamine)], respectively, were synthesized and characterized. Addition of nitric oxide gas to the degassed acetonitrile solution of the complexes were found to result in the reduction of the copper(II) center to copper(I). In cases of complexes 1 and 2, the formation of the [Cu(II)-NO] intermediate prior to the reduction of Cu(II) was evidenced by UV-visible, solution FT-IR and X-band EPR spectroscopic studies. However, for complex 3, the formation of [Cu(II)-NO] has not been observed. DFT calculations on the [Cu(II)-NO] intermediate generated from complex 1 suggest a distorted square pyramidal geometry with the NO ligand coordinated to the Cu(II) center at an equatorial site in a bent geometry. In the case of complex 1, the reduction of the copper(II) center by nitric oxide afforded ligand transformation through diazotization at the primary amine site in acetonitrile solution; whereas, in an acetonitrile-water mixture, it resulted in 2-(pyridine-2-yl)ethanol. On the other hand, in cases of complexes 2 and 3, it was found to yield N-nitrosation at the secondary amine site in the ligand frameworks. The final organic products, in each case, were isolated and characterized by various spectroscopic studies.     

Copper(ii) complexes as turn on fluorescent sensors for nitric oxide

Two copper(ii) complexes, 1 and 2, of two tridentate N-donor ligands, L(1) and L(2) [L(1) = dansyl derivative of bis-[3-(dimethylamino)-propyl]amine; L(2) = dansyl derivative of dipropylenetriamine] were synthesized and characterized. The quenched fluorescence intensity of complexes 1 and 2, in degassed methanol or aqueous (buffered at pH 7.2) solution, was found to reappear on exposure to nitric oxide. This is attributed to the reduction of paramagnetic Cu(ii) center by nitric oxide to diamagnetic Cu(i).