Tracking interacting dark states through higher order absorption resonances

A three photon resonance arising due to coherent population trapped (CPT) states in multi-level systems, is experimentally shown to be a powerful spectral marker to detect interacting CPT states. In systems showing N type or double Λ type level configurations, these absorption resonances can be used to identify spectral positions of maximal interactions between competing CPT ground states. The contrast of the absorption resonance serves to identify even partially destructive interactions between the CPT states, eliminating the need for strong resonant changes of ground state coherence for identification. We demonstrate this effect in a room temperature, gaseous collection of ⁸⁷Rb. atoms. Three laser fields interact with a double Λ configuration in the Zeeman degenerate levels of the ground state 5S_1/2S_{1/2}, F = 1 and those of the excited states 5P_3/2P_{3/2}, F = 0,1, around the D2 line. The three-photon resonance is studied in the counter-propagating third field when the other two co-propagating fields satisfy the two-photon resonance condition necessary for creation of CPT states. We envisage that this absorption feature in the third field, can become a veritable tool to quantify degradation of CPT induced effects in engineered quantum states using multi-level systems.     

Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy

Electroless Ni-P composite coatings have gained a good deal of popularity and acceptance in recent years as they provide considerable improvement of desirable qualities such as hardness, wear, abrasion resistance, etc. The disagreement among researchers on the corrosion behaviour of these coatings warrants a thorough investigation. Among the various techniques available for the determination of corrosion resistance, electrochemical impedance spectroscopy (EIS) is considered to be superior as it provides not only an assessment of the corrosion resistance of different deposits but also enables the mechanistic pathway by which the deposits become corroded to be determined. The present investigation focuses on the evaluation of the corrosion resistance of electroless Ni-P and Ni-P-Si₃N₄, Ni-P-CeO₂ and Ni-P-TiO₂ composite coatings produced using an acidic hypophosphite-reduced electroless nickel bath, using EIS. The study makes evident that the same fundamental reaction is occurring on all the coatings of the present study but over a different effective area in each case. The charge transfer resistance of electroless Ni-P and Ni-P composite deposits are in the range 32,253–90,700 Ω cm², whereas the capacitances of these coatings are in the range 11–17 μF/cm². The improved corrosion resistance obtained for electroless Ni-P and Ni-P composite coatings is due to the enrichment of phosphorus on the electrode surface, which enables the preferential hydrolysis of phosphorus over that of nickel. The better corrosion resistance obtained for electroless Ni-P composite coatings can be ascribed to the decrease in the effective metallic area prone to corrosion. Among the three electroless Ni-P composite coatings, the corrosion resistance is in the following order: Ni-P-CeO₂=Ni-P-Si₃N₄>Ni-P-TiO₂. Electronic Publication     

Thermal,mechanical, and topographical evaluation of nonstoichiometric α-cyclodextrin/poly(ε-caprolactone) pseudorotaxane nucleated poly(ε-caprolactone) composite films

Three pseudorotaxanes (PpR) comprised of poly (ε-caprolactone) (PCL) and α-cyclodextrin (α-CD) with varying stoichiometric ratios were synthesized and characterized. Wide-angle X-ray diffraction (WAXD) and thermogravimetric (TGA) analyses provided conclusive evidence for complexation between the guest PCL and host α-CD. The as-synthesized and characterized PpRs were used at 10 and 20% concentrations as nucleants to promote the bulk PCL crystallization in composite films. Both WAXD and TGA provided evidence for intact PpR structures in the composite films. Isothermal differential scanning calorimetric (I-DSC) analyses, performed at various crystallization temperatures demonstrated significant differences in the crystallization patterns among the composite films. In addition, I-DSC analyses showed higher Avrami constant values (n) in the PpR-nucleated composite PCL films (n ~ 3), indicating 3-dimensional crystal growth. In the case of neat PCL films, however, lower n values indicated crystal growth in 1-dimensions or 2-dimensions. Moreover, atomic force microscopic analyses showed large crests and pits in PpR-nucleated PCL composites, with irregular morphologies leading to higher surface roughness. To the contrary, the crests and pits were much smaller in the neat PCL films, resulting in lower surface roughness values. Finally, mechanical testing revealed higher tensile strength for PpR-nucleated PCL composites films, demonstrating larger load bearing capabilities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1529–1537     

Nonenzymatic glucose sensing at ruthenium dioxide–poly(vinyl chloride)–Nafion composite electrode

Development of nonenzymatic glucose sensors with high reproducibility and stability is an urgent need to reduce cost of regular diabetic monitoring. Here, we have fabricated ruthenium dioxide–poly(vinyl chloride)–Nafion (RuO₂–PVC–Nafion) composite for direct glucose sensing in sodium hydroxide and phosphate buffer nonenzymatically for the first time. The restricted activity of the RuO₂–PVC film electrode in alkaline pH is extended to neutral pH using Nafion as an outer membrane, which reduces the distance between Ru active sites by bridging effect and improves the electrode stability. The catalytic rate, measured in terms of change of RuO₂ resistance, is similar irrespective of the medium for the high temperature annealed RuO₂ (700 °C), whereas the low temperature annealed RuO₂ (300 °C) is highly sensitive for the change in the pH of the solution. This is revealed by observing large Michaelis–Menten kinetic constant K _M for the RuO₂ (700 °C) than the low temperature annealed RuO₂ (300 °C) due to effective increase in the catalytic active sites similar to oxygen evolution reaction. Contrast to this, the buffer solution does not influence significantly the apparent K _M observed for RuO₂ (300 °C) and has greater impact on the high temperature 500 and 700 °C annealed RuO₂ samples. Cyclic voltammetry, chrono amperommetry, and electrochemical impedance spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques are used for characterization of the sensor behavior. The RuO₂–PVC–Nafion senses glucose selectively in the presence of potential interferences like fructose, galactose, mannose, sucrose, starch, uric acid, ascorbic acid, dopamine, and catechol in NaOH and phosphate buffer. Glucose sensing in the blood serum of the diabetic and nondiabetic patients is made. The results suggest that the RuO₂–PVC–Nafion is a promising candidate for the development of nonenzymatic glucose sensors.     

经Opuntia dilenii haw植物提取液绿色合成制备的纳米铝酸锌的催化性质(英文)

Various nanosized zinc aluminate(ZnAl2O4) samples were prepared by a conventional and a mi- crowave method both with and without using Opuntia dilenii haw plant extract,and were charac- terized by X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),high resolution scanning electron microscopy(HRSEM),energy dispersion scanning(EDX),temperature dependent conductance measurements, thermoelectric power measurements, ultraviolet-visible (UV-Vis) diffuse reflectance spectroscopy,and photoluminescence spectroscopy.The formation of a pure ZnAl2O4 phase was confirmed by XRD and FT-IR.A change in morphology from nanosized plates to nanosized sheets with,respectively,the conventional and microwave heating methods was clearly shown by HRSEM.UV-Vis diffusion reflectance spectroscopy measured the band gaps of ZnAl2O4 nanosized plates and nanosized sheets as 3.5 and 3.9 eV,respectively.The synthesized ZnAl2O4 was single crystalline and has three photoluminescence emissions at 482,528,and 540 nm.ZnAl2O4 nanosized sheets prepared by the microwave method showed higher catalytic activity for the oxida- tion of benzyl alcohol(85% conversion) than ZnAl2O4 nanosized plates prepared by the convention- al method(60% conversion).     

Hg(II) immobilized MWCNT graphite electrode for the anodic stripping voltammetric determination of lead and cadmium

The preparation of Hg(II)-modified multi walled carbon nanotube (MWCNT) by reaction of oxidized MWCNT with aqueous HgCl₂ was carried out. The Hg(II)-modified multi walled carbon nanotube (Hg(II)/MWCNT) dispersed in Nafion solution was used to coat the polished graphite electrode surface. The Hg(II)/MWCNT modified graphite electrode was held at a cathodic potential (−1.0 V) to reduce the coordinated Hg(II) to Hg forming nanodroplets of Hg. The modified electrode was characterized by FESEM/EDAX which provided useful insights on the morphology of the electrode. The SEM images showed droplets of Hg in the size of around 260 nm uniformly distributed on the MWCNT. Differential pulse anodic stripping voltammetry (DPASV) and electrochemical impedance spectroscopy were used to study the Hg(II) binding with MWCNT. Differential pulse anodic stripping voltammetry of ppb levels of cadmium and lead using the modified electrode yielded well-defined peaks with low background current under a short deposition time. Detection limit of 0.94 and 1.8 ng L⁻¹ were obtained following a 3 min deposition for Pb(II) and Cd(II), respectively. Various experimental parameters were characterized and optimized. High reproducibility was observed from the RSD values for 20 repetitive measurements of Pb(II) and Cd(II) (1.7 and 1.9%, respectively). The determination of Pb(II) and Cd(II) in tap water and Pb(II) in human hair samples was carried out. The above method of fabrication of Hg(II)/MWCNT modified graphite electrode clearly suggests a safe route for preparing Hg immobilized electrode for stripping analysis.     

Enantioselective LC‐ESI‐MS/MS determination of dropropizine enantiomers in rat plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective and reliable LC–ESI‐MS/MS method for direct quantitation of dropropizine enantiomers namely levodropropizine (LDP) and dextrodropropizine (DDP) in rat plasma without the need for derivatization as per regulatory guidelines. Dropropizine enantiomers and carbamazepine (internal standard) were extracted from 50 μL rat plasma using ethyl acetate. LDP and DDP resolved with good baseline separation (R_s = 4.45) on a Chiralpak IG‐3 column. The mobile phase consisted of methanol with 0.05% diethylamine pumped at a flow rate of 0.5 mL/min. Detection and quantitation were done in multiple reaction monitoring mode following the transitions m/z 237 → 160 and 237 → 194 for dropropizine enantiomers and the internal standard, respectively, in the positive ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 3.23–2022 ng/mL for each enantiomer. The intra‐ and inter‐day precisions were in the ranges of 3.38–13.6 and 5.11–13.8 for LDP and 4.19–11.8 and 8.89–10.1 for DDP. Both LDP and DDP were found to be stable under different stability conditions. The method was successfully used in a stereoselective pharmacokinetic study of dropropizine enantiomers in rats following oral administration of racemate dropropizine at 100 mg/kg. The pharmacokinetic results indicate that the disposition of dropropizine enantiomers is not stereoselective and chiral inversion does not occur in rats.     

An on‐line sample pretreatment technique for the HPLC analysis of plant samples

A continuous‐flow, on‐line sample pretreatment technique using a silica gel microsyringe extractor has been developed. All steps including extraction, separation, clean‐up, and concentration occur in the microsyringe. The overall sample pretreatment process takes <10 min per sample. Different polarity chemicals in the plant sample are successively extracted and separated, and analyzed in parallel using HPLC–UV and HPLC–UV–MS/MS. Polycyclic aromatic hydrocarbons, alkylphenols, and plant hormones were determined as model compounds for nonpolar, intermediate polarity, and polar fractions, respectively. All the parameters that influence the extraction and separation efficiency of the microsyringe extractor have been optimized and evaluated. Under the optimized conditions, recoveries of target compounds ranged from 78.4 to 101.9%, the RSD was <12.8% and the square of the correlation coefficient was >0.99. Complex plant samples of Sambucus Mandshurica Kitag have been tested using this method. Fluorene, phenanthrene, pyrene, and plant hormones were detected in all the samples, and concentrations ranged from 24.2–34.9, 43.8–67.1, 25.9–29.2, and 14.5～110.8 ng/g, respectively.