Cr掺杂ZnO纳米线电子性质和磁性质

本文采用第一性原理密度泛函理论系统的研究了Cr原子单掺杂和双掺杂两种尺寸ZnO纳米线的电子性质和磁性质.所有掺杂纳米线的形成能都比纯纳米线的形成能低,表明掺杂增强了纳米线的稳定性.研究发现Cr原子趋于替代纳米线表面的Zn原子.所有掺杂纳米线都显示了金属性.纳米线的总磁矩主要来源于Cr原子3d轨道的贡献.由于杂化,相邻的O原子和Zn原子也产生了少量自旋.在超原胞内,Cr和O原子磁矩反平行排列,表明它们之间是反铁磁耦合.表面双掺杂纳米线铁磁态能量比反铁磁态能量低149 meV,表明Cr掺杂ZnO纳米线可能获得室温铁磁性.     

Momentum transfer from vacuum field to anisotropic electromagnetic media

It is demonstrated that many novel vacuum effects will be caused if an anisotropic electromagnetic environment, which can break the universal symmetry of vacuum, is achieved. It is thus possible for the momentum to be transferred from the vacuum zero-point field to the anisotropic electromagnetic media. In addition to the effect considered by Feigel more recently [A. Feigel, Phys. Rev. Lett. 92 (2004) 020404], there may exist another vacuum-fluctuation contribution to the momentum of a medium. Such an effect has a relativistic origin (resulting from the relativistic transformation of the optical constants), which, however, was not taken into account by Feigel.     

Enhanced electrochemical properties and thermal stability of LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by surface modification with Eu<Subscript>2</Subscript>O<Subscript>3</Subscript>

Layered LiNi_1/3Co_1/3Mn_1/3O₂ cathode material is synthesized via a sol-gel method and subsequently surface-modified with Eu₂O₃ layer by a wet chemical process. The effect of Eu₂O₃ coating on the electrochemical performances and thermal stability of LiNi_1/3Co_1/3Mn_1/3O₂@Eu₂O₃ cells is investigated systematically by the charge/discharge testing, cyclic voltammograms, AC impedance spectroscopy, and DSC measurements, respectively. In comparison, the Eu₂O₃-coated sample demonstrates better electrochemical performances and thermal stability than that of the pristine one. After 100 cycles at 1C, the Eu₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode demonstrates stable cyclability with capacity retention of 92.9 %, which is higher than that (75.5 %) of the pristine one in voltage range 3.0–4.6 V. Analysis from the electrochemical measurements reveals that the remarkably improved performances of the surface-modified composites are mainly ascribed to the presence of Eu₂O₃-coating layer, which could efficiently suppress the undesirable side reaction and increasing impedance, and enhance the structural stability of active material.     

重金属小团簇Wn(n=2-7)磁性的第一原理计算

使用自旋极化的密度泛函理论下的第一原理方法,对重金属钨的小团簇Wn（n = 2-7）的结构特性和磁性进行了理论计算。结果表明：团簇的结合能随着团簇中原子数的增加而增大;虽然W的体材料不具有磁性,但是W的一些小团簇可以表现出磁性,如W3、W4和W7,其磁矩均为2μB;通过能级图我们分析了Wn 团簇磁矩的变化情况。此外,还分析了Wn团簇的磁矩,结合能,能量的一阶和二阶差分随原子数n的变化,讨论了最稳定团簇W4的电子结构和电荷密度。     

蓝宝石R面上ZnO薄膜的NH3掺杂研究

以NH₃为掺杂源,利用金属有机化学气相沉积(MOCVD)系统在蓝宝石R面上生长出掺氮ZnO薄膜。通过XRD,SEM测量优化了其生长参数,在610℃和在80sccm的NH₃流量下生长出了〈1120〉单一取向的ZnO薄膜。经Hall电阻率测量,得知该薄膜呈现弱p型或高电阻率,并对其光电子能谱进行了研究。     

LED铁路旅客引导系统的分析与设计

LED旅客引导系统,采用一台微机控制多台单片机的类网络控制结构,具有灵活的控制方式;采用LED显示,满足了显示的直观性、美观性、灵活性及耐久性。控制软件还提供了良好的用户界面,使得操作人员操作简单、灵活,便于掌握.     

用光波导光模光谱技术研究DNA-DNA结合蛋白相互作用

探讨了应用光波导光模光谱(Optical waveguide lightmode spectroscopy,OWLS)技术研究DNA-DNA结合蛋白相互作用的可行性和灵敏性。以固定在传感器芯片表面的DNA探针为捕捉分子,溶液中同时含有探针结合序列和NF—κB结合位点序列的寡核苷酸与NF-κB亚单位p50同源二聚体形成的DNA-蛋白质复合物为检测分子,用光波导光模光谱检测技术建立非标记DNA-DNA结合蛋白相互作用检测研究体系。利用这一体系对不同样品中NF-κB p50浓度和具不同NF-κB结合位点序列的寡核苷酸与NF-κB p50亲合和力进行检测。样品中低至0．33 nmol/1的NF-κB p50被光波导光模光谱检测出,不同的NF-κB结合序列与NF-κB p50亲合力有显著的差异。研究发现,光波导光模光谱技术可以用于DNA-DNA结合蛋白相互作用研究,所建立的非标记检测研究体系可以进行样品中结合蛋白含量高灵敏检测和核酸序列与结合蛋白的亲合力的检测研究。     

Analysis of planar waveguides with index discontinuity or index slope discontinuity

In this paper, we propose a novel analytic transfer matrix method (ATMM) to the analysis of planar waveguides with index discontinuity or index slope discontinuity, for the cases when the conventional WKB method is no longer valid. We also analyze the physical insight of the approximations in WKB theory, and according to our research, the phase shift at the turning point is not /2, but exactly . Test calculations are done for an index profile with a known solution and the comparison shows that our method gives extremely accurate propagation constant.     

The measurement of 3-D asymmetric temperature field by using real time laser interferometric tomography

A real time nondestructive temperature measurement technique based on laser holographic interference tomography technique is presented. An He–Ne laser is used as light source, and a CCD video camera is used to grab the interferogram. This laser holographic tomography technique is applied to the measurement of the temperature fields generated by two heated rods. Since data error is inevitable in engineering measurement, it is necessary to study the reconstruction techniques for reconstructing the temperature field. Three techniques including convolution back projection (CBP), algebra reconstruction technique (ART) and simultaneous iterative reconstruction technique (SIRT) are studied. Based on the reconstruction techniques and experimental situation, ART is used to reconstruct the asymmetric temperature fields. The thermocouples are used to measure the temperatures of the two heated rods. Comparing the reconstructed result with the measured temperature value, a satisfactory result is obtained.