大功率激光制备a-C和a-C∶H类金刚石膜的光学性能研究

采用大功率高重复频率准分子激光溅射热解石墨靶制备了类金刚石碳膜, 研究了实验条件对类金刚石膜光学性能的影响, 发现氢可以提高膜中sp3键的含量和膜的光学透过率. 在实验参数范围内, 膜的光学性能随着氢压的增加而提高. 根据类金刚石膜的反应沉积机理对上述结果进行了分析、解释.     

PHOTOCATALYTIC HYDROGEN EVOLUTION FROM WATER SPLITTING UNDER VISIBLE LIGHT IRRADIATION ON NOVEL PHOTOCATALYST FULLENES-PVP-ZN0.999NI0.001S

Fullerenes (C60/C70) linked up to Ni-doped ZnS through the medium of an amphalic polymer polyvinyl pyrrolidone (PVP) to form a new kind of photocatalyst for hydrogen evolution from aqueous Na2S/Na2SO3 solution under visible light irradiation, the photocatalytic activities of this novel photocatalyst C60/C70-PVP-Zn0.999Ni0.001S are 3-5 fold higher compared with that of precurse catalyst Zn0.999Ni0.001S. This result could be attributed to Schottky barrier layer built between C60/C70 and Zn0.999Ni0.001S due to the electro-negativity of C60 and characteristic of being used as a multiple electron acceptor. C60 or C60/C70, its moiety, with its low energy first excited singlet state, is a good energy acceptor and in addition readily accepts multiple electrons, making it a potential electron accumulate as we know, which could protect the separation between electrons and holes against combination. This is an important reason for the marked increase of amount of H2 evolution during the photocatalytic process for the composite system C60/C70-PVP-Zn0.999Ni0.001S.     

NETWORK CROWN ETHER POLYMERS WITH CENTRIC FUNCTIONAL GROUP (Ⅳ) SYNTHESIS OF NETWORK CROWN ETHER POLYMER WITH PENDANT DIETHYLAMINO THIAALKYL GROUP AND ITS PLATINUM COMPLEX*

The title polymer was prepared from 5-diethylamino-3-thia-pentyl glycidyl ether anddiethylene glycol bisglycidyl ether via ring-opening copolymerization. It was found that thisreaction could be catalyzed by sodium, but not Lewis acid. The obtained polymer can coordinatewith platinum compound, and the platinum complex is a new kind of catalyst for thehydrosilylation of olefins with triethoxysilane.     

KINETICS OF DEPOSITION OF METAL IONS TO ACTIVATED CARBON FIBERS (ACFs) WITH FLUIDIZATION

1. INTRODUCTION Study on the deposition of metal ions on ACFs indicated that such a process consists of several consecutive steps [1]: (1) transfer of the solvated ions (metal ions) from the bulk solution to the proximity of the ACFs surface; (2) absorpt…     

镀液中Ce^3＋离子对锡镀层结构缺陷和可焊性的影响

应用荧光分析法、X光电子能谱法(XPS)及正电子湮没寿命谱法(PALS)等研究了从含硫酸铈添加剂的酸性光亮锡镀液获得的锡镀层结构缺陷与可焊性的关系。结果表明,电镀时Ce与Sn不发生共沉积,Ce~(3+)的主要作用是阻化Sn~(2+)的水解和氧化使镀液稳定,因而使锡镀层纯度提高、结构致密、表层氧含量减少,有利于提高镀层的可焊性。当Ce~(3+)浓度控制在3.5g/L左右时,可使镀层结构缺陷较少,可焊性较佳,说明结构缺陷是影响锡镀层可焊性的直接原因。     

硝基甲烷在离子液体BMImBF4中的电还原特性

采用循环伏安等测试方法, 以铂微盘电极为工作电极, 研究了硝基甲烷在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐(BMImBF4)中的电化学行为, 并探讨了温度和扫描速率等因素对硝基甲烷电化学特性的影响. 实验结果表明, 硝基甲烷在离子液体BMImBF4中的还原反应是受扩散控制的不可逆过程. 估算了不同温度下硝基甲烷在离子液体BMImBF4中的扩散系数D, 进而求得它的扩散活化能Ea约为39.5 kJ·mol-1.     

络合滴定法测定钙含量微型实验研究

利用微型滴定法测定含钙制品中的Ca2 含量,并对微型滴定法与常量滴定法的平行测定结果进行了比较。结果两种方法无显著性差异,F检验t检验结果均在允许范围内,相对偏差均小于2.0%,微型滴定法的精度达到常量滴定法测定水平,能满足化学分析要求。     

Gd_3Al_5O_(12)∶Eu~(3+)柠檬酸盐硝酸盐燃烧法合成及其发光性能研究

采用柠檬酸盐硝酸盐燃烧法,在较低的温度(900℃)下成功地合成单一晶相Gd3Al5O12∶Eu3+发光粉体,紫外激发荧光光谱分析表明,粉体615 nm和593 nm荧光发射源于Eu3+的5D0-7F2和5D0-7F1跃迁.该方法中各工艺条件(如pH值、柠檬酸/金属离子比、煅烧温度)对Gd3Al5O12∶Eu3+发光性能均有影响,通过试验得出了获得最佳发光性能荧光粉体的工艺参数.     

Dendritic Macroinitiator for the Ring—Opening Polymerization of γ—Benzyl L—Glutamate N—Carboxyanhydride

Much effort has been dedicated to the molecular design and synthesis of model proteins to define protein folding interactions and to develop protein-based materials. Among them, the ring-opening polymerization of -amino acid-N-carboxyanhy- drides (NCAs) has drawn much attention because the resulting artificial polypeptides have wide applications in biotechnology, biomineralization and diagnostics1, 2. It is well known that dendrimers are hyperbranched macromolecules possessing a very high co…     

吡咯基金属络合物的制备及其在有机合成中的应用

本文综述了近年来吡咯基金属络合物的研究进展, 详细讨论了σ~N-、σ~C-、π-型吡咯基金属络合物的制备方法, 以及各类吡咯基金属络合物在有机合成中的应用。