Structure‐Dependent Photoinduced Electron Transfer in Fullerodendrimers with Light‐Harvesting Oligophenylenevinylene Terminals

Oligophenylenevinylene (OPV)‐terminated phenylenevinylene dendrons G1 – G4 with one, two, four, and eight “side‐arms”, respectively, were prepared and attached to C₆₀ by a 1,3‐dipolar cycloaddition of azomethine ylides generated in situ from dendritic aldehydes and N‐methylglycine. The relative electronic absorption of the OPV moiety increases progressively along the fullerodendrimer family C₆₀G1 – C₆₀G4 , reaching a 99:1 ratio for C₆₀G4 (antenna effect). UV/Vis and near‐IR luminescence and transient absorption spectroscopy was used to elucidate photoinduced energy and electron transfer in C₆₀G1 – C₆₀G4 as a function of OPV moiety size and solvent polarity (toluene, dichloromethane, benzonitrile), taking into account the fact that the free‐energy change for electron transfer is the same along the series owing to the invariability of the donor–acceptor couple. Regardless of solvent, all the fullerodendrimers exhibit ultrafast OPV→C₆₀ singlet energy transfer. In CH₂Cl₂, the OPV→C₆₀ electron transfer from the lowest fullerene singlet level (¹C₆₀*) is slightly exergonic (ΔG_CS≈0.07 eV), but is observed, to an increasing extent, only in the largest systems C₆₀G2 – C₆₀G4 with lower activation barriers for electron transfer. This effect has been related to a decrease of the reorganization energy upon enlargement of the molecular architecture. Structural factors are also at the origin of an unprecedented OPV→C₆₀ electron transfer observed for C₆₀G3 and C₆₀G4 in apolar toluene, whereas in benzonitrile, electron transfer occurs in all cases. Monitoring of the lowest fullerene triplet state by sensitized singlet oxygen luminescence and transient absorption spectroscopy shows that this level is populated through intersystem crossing and is not involved in photoinduced electron transfer.     

Synthesis and characterization of meso-ferrocenylethynyl 5,15-diphenylporphyrins

A series of four meso-ferrocenylethynyl (5,15-diphenylporphyrinato)nickel(II) derivatives have been synthesized by Sonogashira coupling reactions. Three of these compounds contain the electron-withdrawing groups including -CHO, -CHC(CN)₂, and -CCC₆H₄NO₂ at the remaining meso position, with a view to preparing push-pull chromophores, in which ferrocene serves as the electron donor. All the new compounds have been characterized spectroscopically and the molecular structure of one of these porphyrins (compound 11) has also been determined. The studies show that although the ferrocenylethynyl group can extend the π system of the central porphyrin core, the cyclopentadienyl rings of ferrocene are almost orthogonal to the porphyrin ring. This hinders ferrocene serving as a good electron donor in these systems.     

A zwitterion of 1,5‐bis­(2‐hydroxy­benzamido)‐3‐aza­pentane: a two‐dimensional hydrogen‐bonding network involving dimers

The title compound, 2‐{N‐[2‐(2‐hydroxy­benzamido)ethyl­ammonio­ethyl]amino­carbon­yl}phenolate, C₁₈H₂₁N₃O₄, crystallizes in a zwitterionic form as a result of inter­molecular proton transfer and possesses a negatively charged phenolate group and a protonated amino group. The 2‐hydroxy­benzamide and 2‐(amino­carbonyl)­phenolate moieties attached to the two ends of the C—C—N—C—C backbone adopt a cis conformation in relation to this backbone. All N‐ and O‐bound H atoms are involved in hydrogen‐bond formation; the zwitterions are first linked into head‐to‐tail dimers, which are further organized into a two‐dimensional network parallel to the crystallographic bc plane.     

Lysine peroxycarbamates: free radical-promoted peptide cleavage

Strategies are reported that combine in one step a predictable chemical-based protein digestion with mass spectrometry. Lysine residue amino groups in peptides and proteins are modified by reaction with a peroxycarbonate derived from p-nitrophenol, and tert-butyl hydroperoxide. The peroxycarbonate reacts with lysine residues in peptides and proteins, and the resulting lysine peroxycarbamates undergo homolytic fragmentation under conditions of low-energy collision-induced dissociation (CID). Observed fragmentation of the peptides involves apparent free radical processes including Hofmann-L?ffler-type rearrangements that lead to peptide chain fragmentation. Strategies for directed cleavage of peptides by free radical promoted processes are feasible, and such strategies may well simplify schemes for protein analysis.     

Spectrophotometric determination of traces of gallium and indium with 1-(2-pyridylazo)-2-naphthol

1-(2-Pyridylazo)-2-naphthol (PAN) reacts with either gallium or indium at pH 5–6 giving a red complex in an aqueous medium in the presence of N.N-dimethyl-formamide. The maximum absorption of both PAN complexes of gallium and indium in an aqueous solution is at 545 mμ. The gallium-PAN complex shows a characteristic enhancement of color by addition of small amounts of ethers. Based on this selective enhancement reaction, gallium can be determined in the presence of other metals without separation. The results of determining gallium and indium in the presence of each other are reported. Both gallium and indium form M₂(PAN)₃; but in the presence of certain organic solvents, a different gallium complex, Ga(PAN)₅, and the same indium complex, In₂(PAN)₃, are formed. The reaction of PAN with cadmium can be masked by iodide; an example of determining indium in the presence of cadmium is given. The PAN method has a sensitivity of 0.003 μg/cm² for gallium and 0.005μg/cm² for indium and an absorptivity of 24,900 for the Ga-PAN complex and of 24,500 for the In-PAN complex, respectively. The methods have been successfully applied to the determination of both gallium and indium in germanium thin films.     

Differential determination of arsenic (III) and total arsenic with L-cysteine as prereductant using a flow injection non-dispersive atomic absorption device

Speciation of arsenic in environmental samples gains increasingly importance, as the toxic effects of arsenic are related to its oxidation state. A method was developed for the determination of trace amounts of arsenic (III) and total arsenic by flow injection hydride generation coupled with an in-house made non-dispersive AAS device. The total arsenic is determined after prereduction of arsenic (V) to arsenic (III) with L-cysteine in a low concentration of hydrochloric, acetic or nitric acid. The conditions for the prereduction, hydride generation and atomization were systematically investigated. A quartz tube temperature of 800 degrees C was found to be optimum in view of peak shape and baseline stability. Pb(II), Ni(II), Fe(III), Cu(II), Ag(I), Al(III), Ga(II), Se(IV), Bi(III) were checked for interfering with the 2 microg/L As(V) signal. A serious signal depression was only observed for Se(IV) and Bi(III) at a 150-fold excess. With the above system, arsenic was determined at a sampling frequency of about 1/min with a detection limit (3sigma) of 0.01 microg/L using a 0.5 mL sample. The reagent blank was 0.001+/-0.0003 absorbance units and the standard deviation of 10 measurements of the 2 microg/l As signal was found to be 1.2%. Results obtained for standard reference materials and water samples are in good agreement with the certified values and those obtained by ICP-MS     

Synthesis of 2‐Dihydrooxadiazolinyl Chromones

Reactions of the substituted 2‐formyl chromones with aroylhydrazines gave corresponding 2‐(aroylhydrazonomethylidyne) chromones. Then 2‐(3′‐acetyl‐5′‐aryl‐2′,3′‐dihydro‐1′,3′,4′‐oxadiazol‐2′‐yl) chromones were prepared by these 2‐(aroylhydrazonomethylidyne) chromones under refluxing with Ac₂O. All target compounds were characterized through elemental analysis and IR, ¹H NMR, MS.     

Application of Functionalized Ag Nanoparticles for the Determination of Proteins at Nanogram Levels Using the Resonance Light Scattering Method

A novel method for the determination of proteins in aqueous solutions has been developed based on the enhancement of resonance light scattering (RLS) of Ag nanoparticles in the presence of proteins. Factors including acidity of the media, concentration of Ag hydrosol, reaction time, temperature, and interference of non-protein substances were investigated. Under the optimal conditions, with the enhanced RLS signals at 452nm, the linear ranges of calibration curves were 0–0.8µgmL^–1 for bovine serum albumin (BSA), 0–1.2µgmL^–1 for human serum albumin (HSA), and 0–2.5µgmL^–1 for human -IgG (-IgG), respectively. The detection limits were 1.3ngmL^–1 for BSA, 10ngmL^–1 for HAS, and 5.7ngmL^–1 for -IgG.This method has been applied to the analysis of synthetic samples and real human serum samples, and the results were in good agreement with those reported by the hospital, indicating that the method presented here is not only sensitive and simple, but also reliable and suitable for practical applications.     

Vinyl sulfones in solid-phase synthesis: preparation of 4,5,6,7-tetrahydroisoindole derivatives

The preparation of functionalized 4,5,6,7-tetrahydroisoindole via a traceless solid-phase sulfone linker strategy is described. Thermolytic extrusion of SO(2) from polymer-bound 3-(phenylsulfonyl)-3-sulfolene (7) generated polymer-bound 2-(phenylsulfonyl)-1,3-butadiene (9) in situ which underwent Diels--Alder cycloaddition with various dienophiles to furnish vinyl sulfone resins 10-14. To complete a traceless linker cleavage strategy, (p-tolysulfonyl)methyl isocyanide or ethyl isocyanoacetate was employed to react with the vinyl sulfone moiety to liberate functionalized 4,5,6,7-tetrahydroisoindole products from the resin. Using this chemistry, nine tetrahydroisoindole derivatives (6, 15-22) were prepared in 32-41% overall yields from polystyrene/divinylbenzene sulfinate 1.     

Thiazolium-mediated multicomponent reactions: a facile synthesis of 3-aminofuran derivatives

[reaction: see text] A facile synthesis of highly functionalized 3-aminofuran derivatives by the multicomponent reactions of thiazolium salts, aldehydes, and DMAD is described.