Photonic properties of hybrid colloidal crystals fabricated by a rapid dip-coating process

The enhancement of the capillarity fabrication of well-ordered two-dimensional (2D) and three-dimensional (3D) opal photonic crystal is described herein. The quality enhancement and the reduction of the fabrication time are improved by using core@soft adhesive shell (Silica@PolyButylAcrylate) particles dispersed in an organic solvent with a high boiling point. The hybridization by an elastomeric corona polymer, grafted from the SiO(2) surface, has offered adhesive properties naturally tunable by changing the polymer state from a solvated to a dry one. Such properties involve drastic changes of the self-assembly behavior and qualities. Their use, as elementary building blocks, for colloidal crystal fabrication have required a high withdrawal rate (up to 4000 μm s(-1)), i.e. involving a three order of magnitude reduction in time compared to a classic vertical deposition method (1 to 10 μm s(-1)) and a good control/prediction of the coating thickness can be tuned by varying the withdrawal rate and the particle concentration. In addition, an analysis of the 2D synthetic iridescence of the hybrid photonic crystal was performed under white light, revealing the adhesive shell bridge influence on the dissipation energy of cracks linked to the crystal quality and the photonic properties.     

Die Glyzerinbestimmung, insbesondere in Wein und Bier

Ohne Zusammenfassung     

Microwave‐assisted nitroxide‐mediated polymerization for water‐soluble homopolymers and block copolymers synthesis in homogeneous aqueous solution

We performed a critical reinvestigation of microwave enhancement of nitroxide‐mediated polymerization (NMP) of acrylamide (AM) in aqueous media in the dynamic (DYN) mode with a combination of a conventional hydrosoluble radical initiator and a β‐phosphonylated nitroxide (SG1). Based on the results of our previous work, a complementary series of polymerization reactions was carried out between 130 and 160 °C using only the DYN mode to ascertain the existence of a microwave effect. The polymer conversion (p), molar masses, polydispersity index, and viscosity of each sample were measured. The temperature was monitored inside and outside of the vessel using an optical fiber sensor and an IR sensor, respectively. Microwave enhancement of polymerization, temperature control and viscosity of the reaction media were closely related. We also furthered the field of hydrophilic AB diblock copolymer synthesis using a tertiary SG1‐based macroalkoxyamine and directly synthesized both poly(acrylamide‐b‐sodium 2‐acrylamido‐2‐methylpropanesulfonate), a neutral‐b‐anionic diblock copolymer, and poly(acrylamide‐b‐3‐dimethyl(methacrylamidopropyl)ammonium propanesulfonate), a neutral‐b‐zwitterionic diblock copolymer, in homogeneous aqueous media. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polystyrene-coated micro-sized particles by "in situ" surface initiated polymerization in accord with Langmuir model adsorption

This study describes the mechanism of adsorption of polystyrene chains PS "in situ" growth from micro-sized commercial silicate particles, i.e. Feldspar. The main aim is to derive adsorption isotherms from thermal gravimetric analysis (TGA) and size exclusion chromatography (SEC) data obtained during the direct polymerization of PS initiated by a pre-adsorbed radical initiator onto the inorganic surface. The adsorption isotherm plot indicates that the PS adsorption is in accord with the Langmuir Model. The amount of PS monolayer coverage increases with polymerization time, and it is highly dependent on the monomer diffusion to the surface during the hybrid inorganic/organic synthesis. Such behavior depends on the concentration gradient between monomer concentration in solution and that adsorbed by polymerization onto the micro-sized particles surface of Feldspar.     

Electrochemical properties of silver–copper alloy microelectrodes for use in voltammetric field apparatus

Microelectrodes of silver–copper alloys have been evaluated for use in voltammetric analyses. Increased overpotential towards the hydrogen overvoltage reaction (HER) was found as a function of increased copper content in the silver. A study of oxidizing products by cyclic voltammetry (CV) in NaOH solution showed ten anodic and eight cathodic peaks which are described in the present paper. The behaviour of these alloy electrodes is somewhere between pure silver and pure copper electrodes. Differential pulse anodic stripping voltammetry (DPASV) was used to measure zinc, cadmium and lead in ultrapure water only (18 MΩcm), and good linearity was found for all metals (r ²=0.998) in the range of 0.5 to 5 ppb with a 600- to 1,200-s plating time. It was additionally found that cadmium and lead were better separated on the alloy electrodes compared to pure silver electrodes. Measurements of nickel were carried out on alloy electrodes by use of adsorptive differential pulse cathodic stripping voltammetry (Ad-DPCSV), and good linearity (r ²=1.000) was found in the range from 0.5 to 5 ppb with an adsorption time of 120 s. The alloy electrodes were also found to be sensitive to nitrate, and good linearity (r ²=0.997) was found in the range from 1 mg L⁻¹ to 100 mg L⁻¹ using differential pulse voltammetry (DPV) scanning from −450 mV to −1,500 mV. Addition of nitrate in ultrapure water afforded two different peaks related to the successive reductions of nitrate and nitrite. In ammonium buffer solution (pH 8.6) only one peak resulting from reduction of nitrate was observed. Furthermore, the use of alloy electrodes containing 17% Cu was tested in real samples, by installing it in a voltammetric system for monitoring of zinc and lead in a polluted river, the river Deûle, near the town of Douai in northern France. Results were found to be in agreement with parallel measurements carried out by ICP-MS.     

Nafion Coated Silver Amalgam Electrode for Determination of Trace Metals by Anodic Stripping Voltammetry

This paper describes characterization and application of Nafion coated solid silver amalgam electrodes to prevent surface fouling of surfactants in determination of trace metals by differential pulse anodic stripping voltammetry (DPASV). Polymer films of different thickness were tested using Nafion solutions in the range 0.25%–1%. Optimum thickness was archived using a 0.5% Nafion solution, resulting in both increased response and stability over time compared to uncoated electrodes. The influence of model surface active macromolecules was studied using triton X‐100, sodium dodecyl sulfate, dodecyl pyridinium chloride and bovine serum albumin as representatives for surfactants. The resistance to surfactants makes the studied Nafion coated solid silver amalgam electrodes an interesting alternative for practical use in environmental monitoring.     

Tuning the Surface/Bulk Properties by the Control of the Amphiphilic Profile in Gradient Copolymer

Nitroxide Mediated Radical Polymerization (NMP) combined with the Semi-Batch process is used for synthesize poly(N,N-Dimethylacrylamide-grad-Butyl acrylate), called poly(DMA-grad-BuA), in the presence of SG1 as control agent and the alkoxyamine (MAMA) as initiator. The instantaneous composition is used to characterize the gradient copolymers. The variation of the addition rate of DMA influences on the incorporation of DMA in the macromolecular chains. The thermal/rheological properties of gradient copolymers in bulk are also studied and discussed in relation with their local structure.     

Growth kinetics and boron doping of very high Ge content SiGe for source/drain engineering

We have studied the in-situ boron doping of high Ge content Si_1?xGe_x layers (x=0.3, 0.4 and 0.5). These layers have been grown at low pressure (20 Torr) and low temperature (600–650 °C) with a heavily chlorinated chemistry on blanket Si(0 0 1) substrates. Such a chemistry yields a full selectivity versus SiO₂ (isolation) and Si₃N₄ (sidewall spacers) on patterned wafers with gate stacks. We have quantified the impact of the diborane flow on the SiGe layer crystalline quality, its resistivity, the SiGe:B growth rate and the apparent Ge concentration. Resistivity values lower than 1 mΩ cm are easily achieved, all the more so for high Ge content layers. The SiGe growth rate increases and the apparent Ge concentration (from X-ray diffraction) decreases as the diborane flow increases. B atoms (much smaller than Si or Ge) indeed partially compensate the compressive strain in the SiGe:B layers. We have also probed the in-situ boron and phosphorus doping of Si at 750 °C, 20 Torr with a heavily chlorinated chemistry. The B ions concentration increases linearly with the diborane flow, then saturates at a value close to 4×10¹⁹ cm^?3. By contrast, the P ions concentration increases sub-linearly with the phosphine flow, with a maximum value close to 9×10¹⁸ cm^?3. Adding diborane (phosphine) to the gaseous mixture leads to a sharp increase (decrease) of the Si:B (the Si:P) growth rates, which has to be taken into account in device layers. All the know-how acquired will be most handy for the formation of in-situ doped recessed or raised sources and drains in metal-oxide semiconductor devices.     

Nanostructure and mechanical properties of polybutylacrylate filled with grafted silica particles

We investigate the nanostructure and the linear rheological properties of polybutylacrylate (PBA) filled with St?ber silica particles grafted with PBA chains. The silica volume fractions range from 1.8 to 4.7%. The nanostructure of these suspensions is investigated by small-angle neutron scattering (SANS), and we determine their spectromechanical behavior in the linear region. SANS measurements performed on low volume fraction composites show that the grafted silica particles are spherical, slightly polydisperse, and do not form aggregates during the synthesis process. These composites thus constitute model filled polymers. The rheological results show that introducing grafted silica particles in a polymer matrix results in the appearance of a secondary process at low frequency: for the lowest volume fractions, we observe a secondary relaxation that we attribute to the diffusion of the particles in the polymeric matrix. By increasing the silica volume fraction up to a critical value, we obtain gellike behavior at low frequency as well as the appearance of a structure factor on the scattering intensity curves obtained by SANS. Further increasing the silica particle concentration leads to composites exhibiting solidlike low-frequency behavior and to an enhanced structure peak on the SANS diagrams. This quantitative correlation between the progressive appearance of a solidlike rheological behavior, on one hand, and a structure factor, on the other hand, supports the idea that the viscoelastic behavior of filled polymers is governed by the spatial organization of the fillers in the matrix.