Accessibility and Selective Stabilization of the Principal Spin States of Iron by Pyridyl versus Phenolic Ketimines: Modulation of the (6)A(1) ↔ (2)T(2) Ground-State Transformation of the [FeN(4)O(2)](+) Chromophore

Several potentially tridentate pyridyl and phenolic Schiff bases (apRen and HhapRen, respectively) were derived from the condensation reactions of 2-acetylpyridine (ap) and 2'-hydroxyacetophenone (Hhap), respectively, with N-R-ethylenediamine (RNHCH(2)CH(2)NH(2), Ren; R = H, Me or Et) and complexed in situ with iron(II) or iron(III), as dictated by the nature of the ligand donor set, to generate the six-coordinate iron compounds [Fe(II)(apRen)(2)]X(2) (R = H, Me; X(-) = ClO(4)(-), BPh(4)(-), PF(6)(-)) and [Fe(III)(hapRen)(2)]X (R = Me, Et; X(-) = ClO(4)(-), BPh(4)(-)). Single-crystal X-ray analyses of [Fe(II)(apRen)(2)](ClO(4))(2) (R = H, Me) revealed a pseudo-octahedral geometry about the ferrous ion with the Fe(II)-N bond distances (1.896-2.041 ?) pointing to the (1)A(1) (d(π)(6)) ground state; the existence of this spin state was corroborated by magnetic susceptibility measurements and M?ssbauer spectroscopy. In contrast, the X-ray structure of the phenolate complex [Fe(III)(hapMen)(2)]ClO(4), determined at 100 K, demonstrated stabilization of the ferric state; the compression of the coordinate bonds at the metal center is in accord with the (2)T(2) (d(π)(5)) ground state. Magnetic susceptibility measurements along with EPR and M?ssbauer spectroscopic techniques have shown that the iron(III) complexes are spin-crossover (SCO) materials. The spin transition within the [Fe(III)N(4)O(2)](+) chromophore was modulated with alkyl substituents to afford two-step and one-step (6)A(1) ? (2)T(2) transformations in [Fe(III)(hapMen)(2)]ClO(4) and [Fe(III)(hapEen)(2)]ClO(4), respectively. Previously, none of the X-salRen- and X-sal(2)trien-based ferric spin-crossover compounds exhibited a stepwise transition. The optical spectra of the LS iron(II) and SCO iron(III) complexes display intense d(π) → p(π)* and p(π) → d(π) CT visible absorptions, respectively, which account for the spectacular color differences. All the complexes are redox-active; as expected, the one-electron oxidative process in the divalent compounds occurs at higher redox potentials than does the reverse process in the trivalent compounds. The cyclic voltammograms of the latter compounds reveal irreversible electrochemical generation of the phenoxyl radical. Finally, the H(2)salen-type quadridentate ketimine H(2)hapen complexed with an equivalent amount of iron(III) to afford the μ-oxo-monobridged dinuclear complex [{Fe(III)(hapen)}(2)(μ-O)] exhibiting a distorted square-pyramidal geometry at the metal centers and considerable antiferromagnetic coupling of spins (J ≈ -99 cm(-1)).     

On-line on-chip post-column derivatisation reactions for pre-ionisation of analytes and cluster analysis in gradient micro-liquid chromatography/electrospray mass spectrometry

A system is presented that demonstrates the principle of on-line and on-chip post-column derivatisation reactions in micro-high-performance liquid chromatography (micro-HPLC) hyphenated to electrospray time-of-flight mass spectrometry (ESI-TOFMS). In this micro-HPLC-chip-MS set-up, the analytes are separated using gradient micro-HPLC and subsequently derivatised on-chip and detected. One of the major limitations of MS detection is its dependency on the degree of ionisation, which is widely variable and compound-specific. Optimising and controlling the degree of ionisation in a simple manner would allow MS detection to be truly generic. One way of achieving this is by pre-ionisation of analytes using simple derivatisation procedures that are both rapid and quantitative. Performing this in situ on the system described here overcomes issues of sample handling and efficiency losses when time-consuming "bench chemistry" is necessary prior to analysis. The power of the system is demonstrated by the separation of primary and secondary amines, which are subsequently derivatised with a positively charged phosphonium complex and detected in an enhanced manner. Typically, molecular cations (M(+)) are detected showing that the ionisation process is dominated by the phosphonium species, leading to more constant ionisation for a variety of compounds. In addition, stable isotopically labelled ((12)C/(13)C)-phosphonium reagent is used for the reactions, allowing for inherent signal/noise (S/N) improvement and automated data processing using cluster analysis. A similar reaction scheme is used for the derivatisation of ketones and aldehydes, also demonstrating dramatic increases in sensitivity, especially with increasing temperature. Minimal loss in chromatographic fidelity in terms of retention times is observed by the introduction of the micromixer chip into the system. Optimal flow rates in micro-HPLC and ESI-MS are compatible with flow rates for the chip as well as a multitude of in-line optical detectors including UV and fluorescence. In addition, the micromixer chip can be positioned pre-column if preferred. The system is robust, easily fully automated and applicable to a wide variety of reactions. The system has a major advantage in its simple robust connection to the "normal scale" outside world.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Determination of low-level residual ethylene oxide by using solid-phase microextraction and gas chromatography

Current methods of analysis for ethylene oxide (EO) in medical devices include headspace and simulated-use extractions followed by gas chromatography with either a packed or a capillary column. The quantitation limits are about 0.5-1.0 microg/g for a packed column and about 0.1-0.2 microg/g for a capillary column. The current allowable levels of EO on medical devices sterilized with EO gas as outlined in International Organization for Standardization (ISO) 10993-7 may be significantly reduced from current levels by applying the ISO Draft International Standard 10993-17 method for establishing allowable limits. This may require EO test methods with detection and quantitation limits that are much lower than those of the currently available methods. This paper describes a new method that was developed for the determination of low-level EO by solid-phase microextraction using the direct-immersion method. Factors such as temperature and stirring were found to affect absorption efficiency and absorption time. A low extraction temperature (about 6 degrees C) was found to be more efficient than room-temperature extraction. Stirring was found to reduce absorption time by about 50%. Under these conditions, detection and quantitation limits of 0.002 and 0.009 microg/g, respectively, were obtained by using a capillary column. As a result, this method makes compliance with lower EO limits feasible.     

Hepatic butyltin concentrations in beluga whales (Delphinapterus leucas) from the St Lawrence Estuary and northern Quebec,Canada

Butyltin (tributyltin TBT; dibutyltin DBT and monobutyltin MBT) speciation was measured in the liver of beluga whales from the St Lawrence Estuary and Hudson Strait (northern Quebec). Using GC–MS, liver samples were analysed from 21 beluga whales found dead, stranded along the shores of the St Lawrence during the period 1995–1998. In all cases, including a neonate specimen, the liver was contaminated with butyltin compounds with concentrations in the range 0.04–2.1 mg Sn kg⁻¹ on a dry weight basis. Liver samples of five beluga whales from Hudson Strait obtained in the summer of 1998 were also analysed. For these animals, hepatic butyltin concentrations were consistently below the detection limit (<0.5 ng Sn g⁻¹ for MBT and <0.2 ng Sn g⁻¹ for DBT and TBT). Compared with published data on the contamination by TBT of the marine mammals of the St Lawrence in 1988, these contemporary results clearly indicate that the level of contamination of the beluga whales in this coastal marine ecosystem has not decreased ten years after regulating the use of TBT‐based antifoulants on small craft. Copyright © 2000 John Wiley & Sons, Ltd.     

Decay of Iron(V) Nitride Complexes By a NN Bond‐Coupling Reaction in Solution: A Combined Spectroscopic and Theoretical Analysis

Cryogenically trapped Fe^V nitride complexes with cyclam‐based ligands were found to decay by bimolecular reactions, forming exclusively Fe^II compounds. Characterization of educts and products by Mössbauer spectroscopy, mass spectrometry, and spectroscopy‐oriented DFT calculations showed that the reaction mechanism is reductive nitride coupling and release of dinitrogen (2 Fe^V?N→Fe^II‐N?N‐Fe^II→2 Fe^II+N₂). The reaction pathways, representing an “inverse” of the Haber–Bosch reaction, were computationally explored in detail, also to judge the feasibility of yielding catalytically competent Fe^V(N). Implications for the photolytic cleavage of Fe^III azides used to generate high‐valent Fe nitrides are discussed.     

Dioxygen Activation by Siloxide Complexes of Chromium(II) and Chromium(IV)

The reaction of a tripodal trisilanol with n‐butyllithium and CrCl₂ results in a dinuclear Cr^II complex ( 1 ), which is capable of cleaving O₂ to yield in a unique complex ( 2 ) with an asymmetric diamond core composed of two Cr^IV?O units. Magnetic susceptibility data reveal significant exchange coupling of Cr^II (S=2) in 1 and large zero‐field splitting for Cr^IV (S=1) in 2 owing to strong spin–orbit coupling of the ground state. The Cr^IV?O compound can also be generated using PhIO, and evidence was gathered that although it is the stable product isolated after excessive O₂ treatment, it further activates O₂ to yield an intermediate species that oxidizes THF or Me‐THF. By extensive ¹⁸O labeling studies we were able to show, that in the course of this process ¹⁸O₂ exchanges its label with siloxide O atoms of the ligand via terminal oxido ligands.