Self-assembled films based on polypyrrole and carbon nanotubes composites for the determination of Diuron pesticide

In this work, polypyrrole (PPy) and its respective composite with functionalized multi-walled carbon nanotubes (MWCNT) were obtained by chemical polymerization of the monomer pyrrole in aqueous solution. The obtained PPy as well as its composite (PPy-MWCNT) were characterized by Fourier transform infrared spectroscopy (FTIR) and were used to produce nanostructured self-assembled (SA) films deposited onto glass substrates covered with indium tin oxide (ITO). The SA films were produced with alternated layers of polystyrene sulphonated (PSS) and were characterized by UV-visible, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analyses. The applicability of the SA films was evaluated by square wave voltammetry (SWV) with standard additions of aliquots of Diuron pesticide in Britton-Robinson buffer solutions (pH = 2.0). The results showed an oxidation peak at 0.23 V which increases in function of the Diuron concentration for both the SA films. It was also observed that the SA film based on the composite (PPy-MWCNT/PSS) showed a peak current intensity about ten times higher in comparison with its unmodified counterpart (PPy/PSS) for a Diuron concentration of 4.29 × 10^?5 mol L^?1, indicating a synergic effect between PPy and MWCNT in the composite. The limits of quantification (LOQ) and limits of detection (LOD) were respectively 8.6 × 10^?7 mol L^?1 and 2.6 × 10^?7 mol L^?1.     

Reactions of [Mn2(μ-pyS)2(CO)6] with bidentate N-donor ligands: Crystal structure of [Mn(η1-pyS)(bipy)(CO)3] (bipy = 2,2′-bipyridyl, pySH = pyridine-2-thiol)

The dimeric complex [Mn₂(-pyS)₂(CO)₆] (1) reacted with 2 equivalents of 2,2-bipyridyl (bipy), 1,10-phenanthroline (phen), and ethylenediamine (en) to give the corresponding monomeric complexes [Mn(¹-pyS)(bipy)(CO)₃] (2), [Mn(¹-pyS)(phen)(CO)₃] (3), and [Mn( ¹-pyS)(en)(CO)₃] (4). The pyS ligand in these complexes acts as a monodentate, two-electron donor ligand, which coordinates to manganese through the sulfur atom. This is confirmed by an X-ray structure determination of 2, which contains two structural isomers in the asymmetric unit. Crystals of this compound are the monoclinic, space group P2 ₁/c, a = 21.593(4), b = 10.463(2), c = 16.385(3) Å, = 102.468(13)°, V = 3614.5(12) ų, and Z = 8. The three CO groups are facially distributed in both isomers, but the relative positions of the pyS and bipy ligands are different.     

An inexpensive, portable and microcontrolled near infrared LED-photometer for screening analysis of gasoline

A microcontrolled, portable and inexpensive photometer is proposed. It uses a near infrared light emitting diode (NIR LED) as radiation source, a PbSe photoresistor as infrared detector and a programmable interrupt controller (PIC) microcontroller as control unit. The detector system presents a thermoresistor and a thermoelectric cooling to control the detector temperature and keep the noise at low levels. The microcontroller incorporated total autonomy on the proposed photometer. As its components are inexpensive and of easy acquisition, the proposed NIR LED-photometer is an economical alternative for chemical analyses in small routine, research and/or teaching laboratories. By being portable and microcontrolled, it also allows carrying out field chemical analyses. The instrument was successfully applied on the screening analysis to verify adulteration in gasoline samples.     

Matrix isolation FTIR spectroscopic and theoretical study of 3,3-dichloro-1,1,1-trifluoropropane (HCFC-243)

The molecular structure and infrared spectrum of the atmospheric pollutant 3,3-dichloro-1,1,1-trifluoropropane (HCFC-243) were characterized experimentally and theoretically. The theoretical calculations show the existence of two conformers, with the gauche (G) and trans (T) orientation around the HCCC dihedral angle. Conformer G was calculated to be more stable than form T by more than 10 kJ mol (-1). In consonance with the large predicted relative energy of conformer T, only the G form was identified spectroscopically in cryogenic argon (10 K) and xenon (20 K) matrices prepared from room-temperature equilibrium vapor of the compound. The observed infrared spectra of the matrix-isolated HCFC-243 were interpreted with the aid of high-level density functional theory calculations and normal coordinate analysis. For experimental identification of the weakest IR absorption bands, the spectrum of HCFC-243 in the neat solid state at 145 K was obtained. This spectrum also confirmed the sole presence of the G conformer in the sample. Natural bond orbital and atomic charge analyses were carried out for the two conformers to shed light on the most important intramolecular interactions in the two conformers, in particular those responsible for their relative stability.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-ethoxy-3-methoxy-benzaldehyde and their rhenium(I) complexes

The ligands (HL¹, HL² and HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods, and the structures of the ligands have been elucidated by X-ray diffraction. In the case of HL¹, we have tried the reaction with [ReX(CO)₅] (X = Br, Cl) in toluene and we proved the formation of the adduct also by this way by the isolation of single crystals of 1a′ · ½C₇H_8.     

Micro‐EDXRF study of Chalcolithic copper‐based artefacts from Southern Portugal

A collection of 39 metallic artefacts recovered in archaeological sites of Southern Portugal was studied by micro‐EDXRF to identify their compositions and the use of metal among ancient communities. Artefacts presented different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to 2500–2000 BC. The results show copper with variable amounts of As and very low content of other impurities, such as Fe, Pb or Sb. Moreover, nearly half of the collection is composed by arsenical copper alloys, and an association was found between arsenic content and typology because the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic‐rich copper ores or smelting products. Finally, the compositions were compared to those of other collections from neighbouring regions and different chronology to determine metallurgical parallels. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural studies of a novel bioactive benzophenone derivative: (4-Chloro-2-hydroxy-phenyl)-phenyl-methanone

The title compound (4-Chloro-2-hydroxy-phenyl)-phenyl-methanone was synthesized and the product obtained was characterized by spectroscopic techniques, and finally the structure was confirmed by X-ray diffraction studies. The compound crystallizes in the orthorhombic crystal system with the space group Pbca with unit cell parameters, a = 14.0359(5) Å, b = 6.8084(3) Å, c = 23.1097(8) Å, and Z = 4. The structure exhibits an intramolecular hydrogen bond which closes an S(6) ring. No directional interactions beyond the van der Waals packing contacts were identified in the crystal structure.     

Sub-optimal wavelet denoising of coaveraged spectra employing statistics from individual scans

This paper proposes a novel wavelet denoising method, which exploits the statistics of individual scans acquired in the course of a coaveraging process. The proposed method consists of shrinking the wavelet coefficients of the noisy signal by a factor that minimizes the expected square error with respect to the true signal. Since the true signal is not known, a sub-optimal estimate of the shrinking factor is calculated by using the sample statistics of the acquired scans. It is shown that such an estimate can be generated as the limit value of a recursive formulation. In a simulated example, the performance of the proposed method is seen to be equivalent to the best choice between hard and soft thresholding for different signal-to-noise ratios. Such a conclusion is also supported by an experimental investigation involving near-infrared (NIR) scans of a diesel sample. It is worth emphasizing that this experimental example concerns the removal of actual instrumental noise, in contrast to other case studies in the denoising literature, which usually present simulations with artificial noise. The simulated and experimental cases indicate that, in classic denoising based on wavelet coefficient thresholding, choosing between the hard and soft options is not straightforward and may lead to considerably different outcomes. By resorting to the proposed method, the analyst is not required to make such a critical decision in order to achieve appropriate results.