Kinetic studies on the reactions of [Pd(dach)(X-Y)] complexes with some DNA constituents

The kinetics of complex-formation reactions of six Pd(dach) complexes, dach = 1,2-trans-R,R-diaminocyclohexane, viz. [Pd(dach)Cl2], [Pd(dach)(H2O)2]2+, and four complexes with different chelating leaving groups X-Y, viz. [Pd(dach)(O,O-cyclobutane-1,1-dicarboxylate)], [Pd(dach)(N,O-glycine)](+), [Pd(dach)(N,S-methionine)]+ and [Pd(dach)(O,O-oxalate)], were studied. The effect of the leaving group on the lability of the resulting Pd(ii) complexes was studied for the nucleophiles inosine, inosine-5'-monophosphate and guanosine-5'-monophosphate under pseudo-first-order conditions as a function of nucleophile concentration, temperature and pressure using stopped-flow techniques. Two consecutive reaction steps, which both depend on the nucleophile concentration, were observed. The rate constants for all reactions indicate a direct substitution of the X-Y chelate by the selected nucleophiles, thereby showing that the nature of the chelate, viz. O-O (cbdca), (ox), N-O (gly) or S-N (l-met), plays an important role in the kinetic and mechanistic behavior of the Pd(ii) complexes. The mechanism of the substitution reactions is associative in nature as supported by the large and negative values of DeltaS(double dagger) and DeltaV(double dagger).     

Chromatographic Behavior of Fosinopril Sodium and Fosinoprilat Using Neural Networks

In this paper, the chromatographic characterization of fosinopril sodium and fosinoprilat is presented. The first stept was pK _a determination for the active substance and its degradation product using RP-LC. It was followed by optimization employing the combination of experimental design and artificial neural networks. For the definition of input and output variables, the central composite design for three factors was built. Back propagation algorithm was applied to model the system, and then the optimization of the experimental conditions was carried out in the neural network with 3-8-2 structure, which confirmed to be able to provide the maximum performance. From the method optimization, the most appropriate experimental conditions for fosinopril sodium and fosinoprilat analysis were extracted. The optimized method was validated and applied in the quality control of tablets and for forced degradation studies.     

Lead(IV) oxide-graphite composite electrodes: application to sensing of ammonia, nitrite and phenols

Carbon powder modified with lead(IV) oxide was synthesised by a wet impregnation procedure from concentrated lead(II) nitrate solution. The impregnated powder was subsequently thermally treated at 823 K. Electrochemical and spectroscopic characterisation of the modified powder showed that lead(IV) oxide has been formed during the procedure. A novel composite lead(IV) oxide modified carbon powder epoxy electrode was developed for electrocatalytic sensing of gaseous, inorganic and organic analytes. The behaviour and analytical advantages of the composite electrode are evaluated with respect to determination of ammonia, nitrite ions and several different phenols. It has been demonstrated that the composite electrode can be used to analyze these analytes in standard aqueous solutions with competitively low limits of detection.     

The protective role of melatonin under heavy metal-induced stress in Melissa Officinalis L.

Heavy metals, due to their inability to degrade, pose a serious environmental and nutritional problem. The accumulation of essential and non-essential heavy metals in living organisms reduces normal growth and development, resulting in acute poisoning, disease and even death of organisms. Melatonin is a very important multifunctional molecule in protecting plants from oxidative stress due to its ability to directly neutralize reactive oxygen species (ROS). Also, melatonin has a chelating property, which may contribute in reducing metal-induced toxicity. In this paper, the protective role of melatonin in counteracting metal-induced free radical generation was highlighted. Using the HPLC-FLD technique melatonin was identified and quantified in the roots and leaves of lemon balm ( Melissa officinalis L.), grown under photoperiod conditions. Furthermore, the response of plants pre-treated with exogenous 0.1 mM melatonin to the increased zinc (Zn) and cadmium (Cd) concentrations was observed, with changes in mineral (Ca, Mg), physiological and antioxidant status of the plant during heavy metals stress. The obtained melatonin concentrations were the highest published for dry plants so far. Elevated Cd and Zn levels in soil caused alternation in biochemical and physiological parameters of lemon balm leaves and roots. However, melatonin pre-treatment increased plant tolerance to heavy metals stress. Increased Cd and Zn uptake and their translocation into the leaves were also improved, indicating the possible use of melatonin in phytoremediation.     

Equilibrium studies on complex formation reactions of dichlorido[(R,R)-trans-1,2-diaminocyclohexane]platinum(II) complex with ligands of biological significance

Abstract  

The hydrolysis and complex formation equilibria of [Pt(dach)(H₂O)₂]²⁺, where dach is (R,R)-trans-1,2-diaminocyclohexane, with some sulfur- and nitrogen-bonding ligands, such as l-methionine, glutathione, inosine, inosine-5′-monophosphate, and guanosine-5′-monophosphate, were studied in aqueous 0.10 M NaClO₄ solution at 298 K by potentiometric titrations. The experimentally determined pK _a values for the studied diaqua complex were 6.00 and 10.03, respectively. The acid dissociation constants of the ligands were also determined. The stoichiometry and stability constants of the formed complexes are reported, as well as the concentration distribution of the various complex species evaluated as a function of pH. In all studied systems, species with one coordinated molecule of ligand were detected. However, only in systems with l-methionine and inosine, complexes with two molecules of ligand directly coordinated to the Pt(II) ion were found. The results also show that glutathione formed the most stable complexes. These results could contribute to better understanding of the interactions between Pt(II) complexes and biologically significant molecules.     

The intramolecular aryl embrace: from light emission to light absorption

6-(1-Methylpyrrol-2-yl)-2,2'-bipyridine, 3, and 6-(selenophene-2-yl)-2,2'-bipyridine, 4, have been prepared and characterized in solution and by structural determinations. Copper(I) complexes [CuL(2)][PF(6)] in which L is 2,2'-bipyridine substituted in the 6-position by furyl, thienyl, N-methylpyrrolyl, selenopheneyl, methyl or phenyl, (L = 1-6) have been synthesized. The complexes have been characterized by electrospray mass spectrometry, and solution NMR and UV-VIS spectroscopies. The single crystal structures of [Cu(1)(2)][PF(6)], [Cu(2)(2)][PF(6)], [Cu(3)(2)][PF(6)], [Cu(5)(2)][PF(6)] and [Cu(6)(2)][PF(6)] have been determined. In those compounds containing an aromatic substituent attached to the bpy unit, the substituent is twisted with respect to the latter. In [Cu(3)(2)][PF(6)] and [Cu(5)(2)][PF(6)], this results in intra-cation π-stacking between ligands which is very efficient in [Cu(3)(2)](+) despite the steric requirements of the N-methyl substituents. Face-to-face stacking between the ligands in the [Cu(2)(2)](+) ion is achieved by complementary substituent twisting and elongation of one Cu-N bond, but there is no analogous intra-cation π-stacking in [Cu(1)(2)](+). Ligand exchange reactions between [CuL(2)][PF(6)] (L = 1-6) and TiO(2)-anchored ligands 7-10 (L' = 2,2'-bipyridine-based ligands with CO(2)H or PO(OH)(2) anchoring groups) have been applied to produce 24 surface-anchored heteroleptic copper(i) complexes, the formation of which has been evidenced by using MALDI-TOF mass spectrometry and thin layer solid state diffuse reflectance electronic absorption spectroscopy. The efficiencies of the complexes as dyes in DSCs have been measured, and the best efficiencies are observed for [CuLL'] with L' = 10 which contains phosphonate anchoring groups.     

Photocatalytic degradation of metoprolol in water suspension of TiO<Subscript>2</Subscript> nanopowders prepared using sol–gel route

Nanocrystalline titanium dioxide (TiO₂) powders have been synthesized by sol–gel method using titanium tetrachloride (TiCl₄) or tetrabutyl titanate (Ti(OC₄H₉)₄ as precursors, different alcohols and calcination temperatures in the range from 400 to 650 °C. The photocatalytic activity of as-prepared powders has been tested for the degradation of metoprolol tartrate salt, a selective β-blocker used to treat a variety of cardiovascular diseases, and compared to photocatalytic activity obtained from Degussa P25. Nanosized TiO₂ powders prepared from TiCl₄ and amyl-alcohol, calcined at 550 °C, displayed an activity comparable to Degussa P25, whereas the sample from the same series, calcined at 650 °C, showed higher photocatalytic activity in the whole range of the catalyst loading. Structural, morphological and surface properties of synthesized TiO₂ nanopowders have been investigated by XRD, SEM, EDS and BET measurements, as well as FTIR and Raman spectroscopy, in order to find out the material properties which enable rapid an efficient decomposition of metoprolol under UV radiation.     

Analysis of Atorvastatin and Related Substances by MEKC

A new micellar electrokinetic capillary chromatographic (MEKC) method has been developed for simultaneous quantitation of atorvastatin (AT) and its related substances. The separation was carried out in an extended light path capillary at applied voltage of 30 kV using a background electrolyte consisting of 10 mM sodium tetraborate buffer pH 9.5, 50 mM sodium dodecyl sulphate and 20% (v/v) methanol. The addition of methanol to the running buffer resulted in a very effective choice to achieve resolution between the peaks of charged substances adjacent to AT as well as the peaks of neutral drug-related substances. Linear calibration curves were established over the concentration range 100–1,200 μg mL^?1 for AT and 1.0–12.5 μg mL^?1 for related substances. The proposed MEKC procedure has been validated with respect to selectivity, precision, linearity, limits of detection, and quantitation, accuracy and robustness. The method has been successfully applied to the determination of AT and purity evaluation of bulk drug and formulated products.     

A simulation of neutron interaction from Am–Be source with the CR-39 detector

Presented in this paper is a simulation of the interaction of neutrons emitted from a cylindrical Am–Be source with a CR-39 detector. A Fortran90 program, called Neutron.f90, has been written to determine the specifications of secondary particles (alpha particle or proton) and the kinematics of the interactions. A Monte Carlo method was used to simulate which interactions occurred with the constituents of the CR-39 detector, H, C and O atoms. Due to the detector composition, elastic and nonelastic scattering of neutrons is possible. In this paper, nonelastic scattering includes: inelastic scattering; the emission of an alpha particle (n,α) reaction and the emission of a proton (n,p) reaction. Cross sections of other reactions are very small and negligible in comparison with the above mentioned. The energy deposited per unit mass per one neutron was calculated. In addition the contribution to the energy deposited by the alpha particles and protons were determined separately. The program Neutron.f90 computes the coordinates of points in which interactions occur i.e. where secondary particles appear. The energy and angular distributions of protons are also represented in this paper. Another Fortran90 program, called Track_Visibility.f90, was written to calculate the number of visible proton tracks and to calculate the energy deposited per one neutron per one visible track.