Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

Hierarchical Tubular Structures Grown from the Gel/Liquid Interface

Three dimensional hierarchical materials are widespread in nature but are difficult to synthesize by using self‐assembly/organization. Here, we employ a gel–liquid interface to obtain centimeter‐long ～100 μm diameter tubes with complex mineral wall structures that grow from the interface into solution. The gel, made from gelatin, is loaded with metal chloride salt, whereas the solution is a high pH anion source. Tubes were obtained with a range of cations (Ca²⁺, Sr²⁺, Ba²⁺, Cu²⁺, and Zn²⁺) and anions (CO₃^2? and PO₄^3?). The crystalline phases found in the tube walls corresponded to expectations from solution chemistries and phase solubilities. The growth mechanism is found to be akin to that of chemical gardens. The divalent cations modify the strength of the gelatin gel in a manner that involves not only simple electrostatic screening, but also ion‐specific effects. Thus, tubes were not obtained for those ions and/or concentrations that significantly changed the gel’s mechanical structure. At high Cu²⁺ loading, for example, vertical convection bands, not Liesegang bands, were observed in the gels.     

Copper‐Catalyzed Propargylic Substitution of Dichloro Substrates: Enantioselective Synthesis of Trisubstituted Allenes and Formation of Propargylic Quaternary Stereogenic Centers

An easy and versatile Cu‐catalyzed propargylic substitution process is presented. Using easily prepared prochiral dichloro substrates, readily available Grignard reagents together with catalytic amount of copper salt and chiral ligand, we accessed a range of synthetically interesting trisubstituted chloroallenes. Substrate scope and nucleophile scope are broad, providing generally high enantioselectivity for the desired 1,3‐substitution products. The enantioenriched chloroallenes could be further transformed into the corresponding trisubstituted allenes or terminal alkynes bearing all‐carbon quaternary stereogenic centers, through the copper‐catalyzed enantiospecific 1,1/1,3‐substitutions. The two successive copper‐catalyzed reactions could be eventually combined into a one‐pot procedure and different desired allenes or alkynes were obtained respectively with high enantiomeric excesses.     

Total Synthesis of the Anti‐inflammatory and Pro‐resolving Lipid Mediator MaR1n−3 DPA Utilizing an sp3–sp3 Negishi Cross‐Coupling Reaction

The first total synthesis of the lipid mediator MaR1_{n?3 DPA} ( 5 ) has been achieved in 12 % overall yield over 11 steps. The stereoselective preparation of 5 was based on a Pd‐catalyzed sp³–sp³ Negishi cross‐coupling reaction and a stereocontrolled Evans–Nagao acetate aldol reaction. LC‐MS/MS results with synthetic material matched the biologically produced 5 . This novel lipid mediator displayed potent pro‐resolving properties stimulating macrophage efferocytosis of apoptotic neutrophils.     

Production of Cellulolytic Enzymes by <Emphasis Type="Italic">Aspergillus phoenicis</Emphasis> in Grape Waste using Response Surface Methodology

The production of cellulolytic enzymes by the fungus Aspergillus phoenicis was investigated. Grape waste from the winemaking industry was chosen as the growth substrate among several agro-industrial byproducts. A 2 × 2 central composite design was performed, utilizing the amount of grape waste and peptone as independent variables. The fungus was cultivated in submerged fermentation at 30 °C and 120 rpm for 120 h, and the activities of total cellulases, endoglucanases, and β-glucosidases were measured. Total cellulases were positively influenced by the linear increase of peptone concentration and decrease at axial concentrations of grape waste and peptone. Maximum activity of endoglucanase was observed by a linear increase of both grape waste and peptone concentrations. Concentrations of grape waste between 5 and 15 g/L had a positive effect on the production of β-glucosidase; peptone had no significant effects. The optimum production of the three cellulolytic activities was observed at values near the central point. A. phoenicis has the potential for the production of cellulases utilizing grape waste as the growth substrate.     

Evaluation of 27Al and 51V electric field gradients and the crystal structure for aluminum orthovanadate (AlVO4) by density functional theory calculations

Three sets of crystal-structure data reported for AlVO(4) from two powder-XRD studies and a density functional theory (DFT) investigation, employing the Vienna ab initio simulation package (VASP), have been examined and refined using the DFT structure-optimization scheme implemented in the WIEN2k software. The crystal structures are evaluated on the basis of (27)Al and (51)V quadrupole coupling parameters recently reported for AlVO(4), employing the corresponding electric-field gradient (EFG) tensor elements obtained from the DFT calculations. The DFT calculations provide a reliable assignment of the (27)Al/(51)V resonances from three distinct Al and three V environments to the specific crystallographic sites in the asymmetric unit for AlVO(4). An improved agreement between experimental quadrupole tensor elements and calculated EFG tensors is achieved after the DFT structure optimizations and consistent results are obtained using the three different structures as starting points. The improvement of the structural data is also supported by an evaluation of the Al-O and V-O bond lengths before and after DFT structure optimization. The (51)V nuclear quadrupole moment, |Q((51)V)| = 4.8 +/- 0.1 fm(2), derived from the present analysis, represents a value of higher accuracy than earlier reported Q((51)V) values. The origin of the (27)Al and (51)V EFGs are investigated by an evaluation of the orientations of the EFG tensors in the crystal frame and by an examination of the individual contributions from the valence electrons and the surrounding lattice. The latter investigation shows that the magnitude and orientation of the tensors are largely determined by the p-p((27)Al) and p-p, d-d((51)V) orbital contributions to the valence electrons, while the lattice part only gives a minor contribution for both nuclei.     

Isolation of Escherichia coli inner membranes by metal affinity two-phase partitioning

As reduction of sample complexity is a central issue in membrane proteomic research, the need for new pre-fractionation methods is significant. Here we present a method for fast and efficient enrichment of Escherichia coli inner membranes expressing a His-tagged integral membrane L-fucose-proton symporter (FucP). An enriched inner membrane fraction was obtained from a crude membrane mixture using affinity two-phase partitioning in combination with nickel-nitrilotriacetic acid (Ni-NTA) immobilized on agarose beads. Due to interaction between the beads and FucP, inner membranes were selectively partitioned to the bottom phase of a polymer/polymer aqueous two-phase system consisting of poly(ethylene glycol) (PEG) and dextran. The partitioning of membranes was monitored by assaying the activity of an inner membrane marker protein and measuring the total protein content in both phases. The enrichment of inner membrane proteins in the dextran phase was also investigated by proteomic methodology, including sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), trypsin digestion and liquid chromatography in combination with tandem mass spectrometry (LC-MS/MS). Using a high level of significance (99.95%) in the subsequent database search, 36 proteins assigned to the inner membrane were identified in the bottom phase, compared to 29 when using the standard sucrose gradient centrifugation method for inner membrane isolation. Furthermore, metal affinity two-phase partitioning was up to 10 times faster than sucrose gradient centrifugation. The separation conditions in these model experiments provide a basis for the selective isolation of E. coli membranes expressing His-tagged proteins and can therefore facilitate research on such membrane proteomes.     

Determination of shikimate in crude plant extracts by micellar electrokinetic capillary chromatography

A method based on micellar electrokinetic capillary chromatography (MECC) has been developed for the determination of shikimate in water and crude plant extracts. The analytes are separated in a cholate-taurine buffer by MECC at pH 7.3 and measured by direct UV detection at 206 nm. Shikimate showed linearity up to 12.5 mM, with a squared correlation coefficient (r(2)) of 0.9997. The method has concentration limit of detection (cLOD) and concentration limit of quantification (cLOQ) at 24.4 and 67.8 microM, respectively, corresponding to detection in the femtomol range. The number of theoretical plates (N) was estimated to 245,000 for the optimized system using a capillary with an effective length of 560 mm. The method was tested on plant samples by measuring the shikimate content in leaves of rapeseed plants grown in hydroponic solutions containing the herbicide glyphosate, a well-known inhibitor of the shikimate pathway. In crude extracts of these plants, shikimate was found to accumulate in the leaves, confirming earlier reports of shikimate as a potential biomarker for glyphosate treatment. The method now developed was also able to detect shikimate-3-phosphate, but this compound was not accumulated in glyphosate inhibited plants as found for shikimate.     

Conductivity percolation in loosely compacted microcrystalline cellulose: An in situ study by dielectric spectroscopy during densification

The present study aims at contributing to a complete understanding of the water-induced ionic charge transport in cellulose. The behavior of this transport in loosely compacted microcrystalline cellulose (MCC) powder was investigated as a function of density utilizing a new type of measurement setup, allowing for dielectric spectroscopy measurement in situ during compaction. The ionic conductivity in MCC was found to increase with increasing density until a leveling-out was observed for densities above approximately 0.7 g/cm3. Further, it was shown that the ionic conductivity vs density followed a percolation type behavior signifying the percolation of conductive paths in a 3D conducting network. The density percolation threshold was found to be between approximately 0.2 and 0.4 g/cm3, depending strongly on the cellulose moisture content. The observed percolation behavior was attributed to the forming of interparticulate bonds in the MCC and the percolation threshold dependence on moisture was linked to the moisture dependence of particle rearrangement and plastic deformation in MCC during compaction. The obtained results add to the understanding of the density-dependent water-induced ionic transport in cellulose showing that, at given moisture content, the two major parameters determining the magnitude of the conductivity are the connectedness of the interparticluate bonds and the connectedness of pores with a diameter in the 5-20 nm size range. At densities between approximately 0.7 and 1.2 g/cm3 both the bond and the pore networks have percolated, facilitating charge transport through the MCC compact.     

Sugar-assisted kinetic resolution of amino acids and amplification of enantiomeric excess of organic molecules

The origins of biological homochirality have intrigued researchers since Pasteur's discovery of the optical activity of biomolecules. Herein, we propose and demonstrate a novel alternative for the evolution of homochirality that is not based on autocatalysis and forges a direct relationship between the chirality of sugars and amino acids. This process provides a mechanism in which a racemic mixture of an amino acid can catalyze the formation of an optically active organic molecule in the presence of a sugar product of low enantiomeric excess.