Riemann solution for ideal isentropic magnetogasdynamics

In the present paper, we study the Riemann problem for quasilinear hyperbolic system of partial differential equations governing the one dimensional ideal isentropic magnetogasdynamics with transverse magnetic field. We discuss the properties of rarefaction waves, shocks and contact discontinuities. Differently from single equation methods rooted in the ideal gasdynamics, the new approach is based on the system of two nonlinear equations imposing the equality of total pressure and velocity, assuming as unknowns the two values of densities, on both sides of the contact discontinuity. Newton iterative method is used to obtain densities. The resulting exact solver is implemented with the examples of general applicability of the proposed approach. For comparisons with exact solution we also shown numerical results obtained by the total variation diminishing slope limiter centre scheme. It is shown that both analytical and numerical results demonstrate the broad applicability and robustness of the new Riemann solver.     

Coupled atom transfer radical coupling and atom transfer radical polymerization approach for controlled grafting from poly(vinylidene fluoride) backbone

A new “grafting from” strategy for grafting of different monomers (methacrylates, acrylates, and acrylamide) on poly(vinylidene fluoride) (PVDF) backbone is designed using atom transfer radical coupling (ATRC) and atom transfer radical polymerization (ATRP). 4‐Hydroxy TEMPO moieties are anchored on PVDF backbone by ATRC followed by attachment of ATRP initiating sites chosen according to the reactivity of different monomers. High graft conversion is achieved and grafting of poly(methyl methacrylate) (PMMA) exhibits high degree of polymerization (DPn = 770) with a very low graft density (0.18 per hundred VDF units) which has been increased to 0.44 by regenerating the active catalyst with the addition of Cu(0). A significant impact on thermal and stress–strain property of graft copolymers on the graft density and graft length is noted. Higher tensile strain and toughness are observed for PVDF‐g‐PMMA produced from model initiator but graft copolymer from pure PVDF exhibits higher tensile strength and Young's modulus. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 995–1008     

Multi‐functional poly(vinylidene fluoride) graft copolymers

Poly(vinylidene fluoride) (PVDF) is known for its biocompatibility, piezo and pyro‐electricity, and membrane forming capability. In order to tune its properties, modification through grafting from approach by atom transfer radical polymerization (ATRP) is preferred. Hydrophilic polymers like poly(ethylene glycol) methacrylate, poly(methacrylic acid), poly(dimethylaminoethyl methacrylate) (PDMAEMA), and so forth have been anchored from PVDF backbone in order to make permeation of water molecules through the PVDF based membranes. The successful solution grafting of PDMAEMA chains from PVDF backbone by ATRP resulted appreciable graft conversion and hence its bulk properties showed a significant change. This water soluble graft copolymer shows incredible mechanical and adhesive properties. PVDF‐g‐poly(n‐butyl methacrylate) generates honey‐comb porous film using “breath figure” technique. Recently, they have used further improvement of grafting where model ATRP initiators are anchored using atom transfer radical coupling and used them as macroinitiators for grafting. This approach simplified the grafting reactions even more and enabled successful grafting of a large number of monomers under relatively less drastic conditions with appreciable conversion compared with the previous conditions. This technique has resulted interesting solution properties, ion and electron conducting PVDF, antifouling membrane, super glue and super tough materials, capable of generating metal nanoparticles tunable with pH and temperature. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2569–2584     

Metal-free diastereoselective synthesis of diaza-bicyclo[3.2.0]heptan-7-one and its transformation to functionalized proline esters

A metal-free diastereoselective synthesis of novel 4-halo-3,6-di-aryl-2,6-diaza-bicyclo[3.2.0]heptan-7-one by intramolecular endo-trig haloamination of 3-amino-2-azetidinone is reported. The amidiolytic ring opening of diaza-bicyclo[3.2.0]heptan-7-one with sodium methoxide provides an easy access to previously unknown 4-halo-3-aryl amino-pyrrolidine-2-carboxylic acid methyl esters in good yields.     

Supramolecular Complex of Poly(styrene)-b-Poly(4-vinylpyridine) and 1-Pyrenebutyric Acid in Thin Film

Summary: Here, we have described a novel supramolecular complex (SMC) between poly(styrene)-b-poly(4-vinylpyridine) (PS-b-P4VP) and 1-pyrenebutyric acid (PBA) and studied of its self assembly in thin film. PBA will make supramolecular complex with the P4VP block due to strong hydrogen bonding between the carboxylic group of 1-pyrenebutyric acid and pyridine ring of P4VP. The formation of supramolecular complex between PS-P4VP and PBA through hydrogen bonding is investigated through FTIR study. The supramolecular complex of PS-b-P4VP and 1-pyrenebutyric acid changed the block copolymer morphology from cylindrical to lamella in thin film due to the increase of the volume fraction of P4VP (PBA). In both cases (parent block copolymer and SMC), the microdomains are oriented normal to the substrate after annealing in a selective solvent. Pure block copolymer shows cylindrical morphology with a periodicity of ∼26 nm, whereas the SMC shows lamellar morphology with a periodicity of ∼ 29 nm. After fabricating the thin film from SMC, 1-pyrenebutyric acid can be easily removed by dissolving the thin film in ethanol to transform the block copolymer thin film into nanotemplate or membrane.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Polymer nanocomposite membranes and their application for flow catalysis and photocatalytic degradation of organic pollutants

The modern world essentially needs a chemical industry that can operate with reduced production costs, and produce high-quality products with low environmental impact. The polymer nanocomposite-based flow catalytic membrane reactor where the reaction and separation can be amalgamated in one unit is considered as one of the new alternative solutions to solve these problems. In this review, we have discussed state-of-the-art flow-through catalytic reactors based on polymer nanocomposite membranes. The unique advantages of flow catalysis include uninterrupted operation, good recyclability, and reaction product without contamination that leads to simple purification. Various catalytic model reactions such as coupling, hydrogenation, esterification in the flow system are presented. We have also presented an overview of methods adopted for preparing such nanocomposite membranes. In the last section, a discussion has been made on the recent advances on polymer-based nanocomposite membranes for the degradation and separation of organic pollutants.     

Electrochemiluminescence at nitrogen doped diamond-like carbon film electrodes

In the given paper the results of investigation of nitrogen doped diamond-like carbon films (DLF) for the fabrication of electrodes of electrochemical and electrochemiluminescent (ECL) cells are presented. The surface nanomorphology of modified electrodes was studied using the atomic-force microscopy method. The mechanisms of ECL reactions with Ru(bpy) ₃ ¹⁺ /Ru(bpy) ₃ ³⁺ (recombination Ru(bpy) ₃ ³⁺ /OH^? (ECL without co-reactant) and Ru(bpy) ₃ ³⁺ /tripropylamine (ECL with co-reactant) were studied on DLF modified electrodes in the aqueous solution. The work shows advantages of DLF as an electrode material for further analytical applications.     

Red-Emitting Delayed Fluorescence and Room Temperature Phosphorescence from Core-Substituted Naphthalene Diimides

Unprecedented ambient triplet-mediated emission in core-substituted naphthalene diimide (cNDI) derivatives is unveiled via delayed fluorescence and room temperature phosphorescence. Carbazole core-substituted cNDIs, with a donor–acceptor design, showed deep-red triplet emission in solution processable films with high quantum yield. This study, with detailed theoretical calculations and time-resolved emission experiments, enables new design insights into the triplet harvesting of cNDIs; an important family of molecules which has been, otherwise, extensively been investigated for its n-type electronic character and tunable singlet fluorescence.     

An insight into the schizophrenic self‐assembly of thermo and proton sensitive graphene oxide grafted block copolymer

In order to study the self‐assembly of block copolymer grafted from graphene oxide (GO) by the fluorescence of GO, poly(ε‐caprolactone) (PCL)‐block‐poly(dimethyl aminoethyl methacrylate) (PDMAEMA) is grafted from its surface using consecutive ring opening (ROP) and atom transfer radical polymerization (ATRP). GO‐g‐(PCL₁₃‐b‐PDMAEMA₁₁₇) (GPCLD) at pH 9.2 exhibits cloud point (T_c) at 32 °C. At pH 9.2 HRTEM images indicate schizophrenic morphology from vesicle at 26 °C to annular ring at 30 °C followed by giant size aggregation at 38 °C. But the reference block copolymer (PCL₁₄‐b‐PDMAEMA₁₂₆, PCLD), synthesized using benzyl alcohol as ROP initiator, exhibits only core–shell morphology whose size increases with rising temperature at pH 9.2. GPCLD solution exhibits good photoluminescence (PL) property arising from GO at pH 9.2 and PL‐intensity increases abruptly during phase transition. Both T_c and size of GPCLD assembly can be reversibly tuned by CO₂ and N₂ gas purging. ¹H NMR spectra exhibit a gradual shift of resonance peaks of the protons on CO₂ bubbling. Thus at pH 9.2 and at 38 °C the GPCLD acts as a good CO₂ sensor. Additionally, the GPCLD vesicle can load hydrophobic guest molecules which can be released by triggering with CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3878–3887