Studies on selenite adsorption using manganese nodule leached residues

Selenite adsorption on water-washed manganese nodule leached residues (WMNLR) was studied with the aim of detoxifying industrial effluents before their safe disposal into the environment. WMNLR, a solid waste material, was characterized with the help of XRD, FTIR, TG-DTA, pH(pzc), BET surface area, surface oxygen, surface hydroxyl group, and chemical analyses. The adsorption behavior of WMNLR toward selenite was studied as a function of time, pH, temperature, and concentration of adsorbate and adsorbent. Increased adsorption capacity with rise in temperature indicates that the adsorption process was endothermic in nature. Based on the thermodynamic parameters such as the Gibbs free energy change, standard enthalpy change, and standard entropy change, the adsorption process was found to be spontaneous and endothermic in nature. Adsorption followed second-order kinetics. The adsorption capacity of the material was found to be 54.6 mg g(-1) at 60 mg L(-1) of selenite concentration at pH 5 in 3 h contact time.     

New formulas and predictions for running masses at higher scales in MSSM

The effects of the scale dependent vacuum expectation values (VEVs) on the running masses of quarks and leptons in non-SUSY gauge theories have been considered by a number of authors. Here we use RGEs of the VEVs, and the gauge and Yukawa couplings in the MSSM to analytically derive new one loop formulas for the running masses above the SUSY breaking scale. Some of the masses exhibit a substantially different behaviour with respect to their dependence on the gauge and Yukawa couplings when compared with earlier formulas in the MSSM derived ignoring RGEs of VEVs. In particular, the masses of the first two generations are found to be independent of the Yukawa couplings of the third generation in the small mixing limit. New numerical estimates at the two loop level are also presented. Received: 30 July 1999 / Published online: 6 April 2000     

Integrated Condition Monitoring of Large Captive Power Plants and Aluminum Smelters

Condition monitoring is implementation of the advanced diagnostic techniques to reduce downtime and to increase the efficiency and reliability. The research is for determining the usage of advanced techniques like Vibration analysis, Oil analysis and Thermography to diagnose ensuing problems of the Plant and Machinery at an early stage and plan to take corrective and preventive actions to eliminate the forthcoming breakdown and enhancing the reliability of the system. Nowadays, the most of the industries have adopted the condition monitoring techniques as a part of support system to the basic maintenance strategies. Major condition monitoring technique they follow is Vibration Spectrum Analysis, which can detect faults at a very early stage. However implementation of other techniques like Oil analysis or Ferrography, Thermography etc. can further enhance the data interpretation as they would detect the source of abnormality at much early stage thus providing us with a longer lead time to plan and take the corrective actions. In Large Captive Power Plants and Aluminium Smelters, Integrated Condition Monitoring techniques play an important role as stoppage of primary system and its auxiliaries (boiler, steam turbine, generator, coal and ash handling plants etc.) results into the stoppage of the entire plant, which in turn leads to loss of productivity. From economical and operational point of view, it is desirable to ensure optimum level of system availability.     

Surface characterization and catalytic evaluation of copper-promoted Al-MCM-41 toward hydroxylation of phenol

The Mobil Composition of Matter No. 41 (MCM-41) containing Cu and Al with Si/Al ratios varying from 100 to 10 and 1 to 6 wt.% of Cu was synthesized under hydrothermal and impregnation conditions, respectively. The samples were characterized by nitrogen adsorption–desorption measurements, X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD), and ²⁹Si and ²⁷Al magic-angle spinning–nuclear magnetic resonance (MAS–NMR) spectra. X-ray diffraction patterns indicate that the modified materials retain the standard MCM-41 structure. TPR patterns show the two-step reduction of Cu species. TPD study shows that Cu-impregnated Al-MCM-41 samples are more acidic than Al-MCM-41. From the MAS–NMR it was confirmed that most of the Al atoms are present tetrahedrally within the framework and some are present octahedrally in extraframework position. Impregnation of Cu shifted Al to the extraframework position. The catalytic activity of the samples toward hydroxylation of phenol in aqueous medium was evaluated using H₂O₂ as the oxidant at 80 °C. The effects of reaction parameters such as temperature, catalyst amount, amount of H₂O₂, and solvent were also investigated. Sample containing 4 wt.% copper-loaded Al-MCM-41-100 showed high phenol conversion (78%) with 68% catechol and 32% hydroquinone selectivity.     

Effect of sulfate on the surface and catalytic properties of iron-chromium mixed oxide pillared clay

Sulfate-supported iron-chromium mixed oxide pillared clay was prepared varying the sulfate loading from 1 to 5 wt% by the incipient wetness method and characterized by low-angle XRD, BET surface area, and ammonia TPD. All the samples were found to be stable up to 500 degrees C having the basal spacing 17.7 A even after sulfate impregnation. Formation of strong Lewis acid sites and decrease in the number of Br?nsted acid sites due to the sulfate loading were observed from the ammonia TPD curve. Catalytic properties of the sulfated materials were evaluated with the help of methanol conversion and aromatic alkylation reactions and correlated with the surface area and TPD results. For methanol conversion, decomposition product selectivity increases due to the sulfate addition. A negligible decrease in the surface area and a substantial increase in the catalytic activity were observed due to the sulfate loading of 1-2 wt%. However, a significant decrease in the surface area as well as catalytic activity was observed for the 3 wt% and above sulfate loaded samples which may be due to the partial blockage of pores by excess sulfate. Results shows the importance of acidity of the material due to sulfate loading (up to 2 wt%) and thus can be used as a better acid catalyst.     

Structural and electrical characterization of BiFeO3–NaTaO3 multiferroic

Using a standard high-temperature solid-state reaction technique, polycrystalline samples of (Bi_1?x , Na _x ) (Fe_1?x , Ta _x ) O₃ (x = 0.0, 0.5) were prepared. The formation of the desired materials was confirmed by X-ray diffraction. The surface texture of the prepared materials recorded by scanning electron microscope exhibits a uniform grain distribution with small voids suggesting the formation of high-density pellet samples. The impedance and dielectric properties of the materials were investigated as a function of temperature and frequency. The relative dielectric constant and loss tangent of BiFeO₃ decrease on addition of NaTaO₃ (x = 0.5). The effect of addition of NaTaO₃ on grain and grain boundary contributions in the resistive and capacitive components of BiFeO₃ was studied using complex impedance spectroscopy. The value of activation energy due to both grain and grain boundary of both the samples is nearly same. The nature of variation of dc conductivity confirms the Arrhenius behavior of the materials. Study of frequency dependence of ac conductivity suggests that the materials obey Jonscher’s universal power law and the presence of ionic conductivity.     

Photocatalytic activity of Au/TiO<Subscript>2</Subscript> nanocomposite for azo-dyes degradation

The structural properties of Au/TiO₂ catalyst were studied by X-ray diffraction, UV-visible diffuse reflectance, photoluminescene, scanning transmission and electron microscope, and temperature programmed reduction. The photocatalytic activity of the catalysts was evaluated for the degradation of various azo-dyes such as methylene blue, methyl orange, reactive blue-4, and eosin-B under solar irradiation. It was found that TiO₂ catalyst modified with gold exhibits higher percentage of degradation compared to starting TiO₂. For example, TiO₂ showed 35% of methyl orange degradation whereas gold modified TiO₂ possessed 82%. Effect of different parameters such as pH and dye concentration has been evaluated and the photocatalytic activity was correlated with physico-chemical properties. The dye degradation rate followed first order kinetics.     

Adsorption of organic molecules on silica surface

The adsorption behaviour of various organic adsorbates on silica surface is reviewed. Most of the structural information on silica is obtained from IR spectral data and from the characteristics of water present at the silica surface. Silica surface is generally embedded with hydroxy groups and ethereal linkages, and hence considered to have a negative charged surface prone to adsorption of electron deficient species. Adsorption isotherms of the adsorbates delineate the nature of binding of the adsorbate with silica. Aromatic compounds are found to involve the pi-cloud in hydrogen bonding with silanol OH group during adsorption. Cationic and nonionic surfactants adsorb on silica surface involving hydrogen bonding. Sometimes, a polar part of the surfactants also contributes to the adsorption process. Styryl pyridinium dyes are found to anchor on silica surface in flat-on position. On modification of the silica by treating with alkali, the adsorption behaviour of cationic surfactant or polyethylene glycol changes due to change in the characteristics of silica or modified silica surface. In case of PEG-modified silica, adsolubilization of the adsorbate is observed. By using a modified adsorption equation, hemimicellization is proposed for these dyes. Adsorptions of some natural macromolecules like proteins and nucleic acids are investigated to study the hydrophobic and hydrophilic binding sites of silica. Artificial macromolecules like synthetic polymers are found to be adsorbed on silica surface due to the interaction of the multifunctional groups of the polymers with silanols. Preferential adsorption of polar adsorbates is observed in case of adsorbate mixtures. When surfactant mixtures are considered to study competitive adsorption on silica surface, critical micelle concentration of individual surfactant also contributes to the adsorption isotherm. The structural study of adsorbed surface and the thermodynamics of adsorption are given some importance in this review.     

Grafting of vinyl monomers onto sisal fiber in aqueous solution

Graft copolymerization of acrylonitrile (AN) onto sisal fibers (chemically modified) was studied using the Mn(III)/EDTA redox system in aqueous solution. The effects of time, monomer (AN), metal ion [Mn(III)] substrate [ethylene diamine tetraacetic acid (EDTA)], temperature, and acid concentration on graft yield have been studied. The effects of thiourea on the graft yield has also been studied. A suitable mechanism is proposed.     

Radiative stability of neutrino-mass textures

Neutrino-mass textures proposed at high scales are known to be unstable against radiative corrections especially for nearly degenerate mass eigenvalues. We find a mechanism in a class of gauge models including 2HDM where the RG constraints can be evaded. Consequently, a high-scale texture can match the low-energy data or be reproduced at low energies.