简易型离子选择电极-流动注射分析仪的研制及卤水中氯、溴和碘的连续测定

本文设计研制了简单实用的流通池,组装了简易型离子选择电极—流动注射分析仪,对体系的分析特点和影响因素进行了考察。此装置性能可靠,能满足简单流注分析的需要,并建立了卤水中Cl~-、Br~-和I~-的连续测定方法。     

催化动力学极谱法测定痕量钼

在稀Ｈ２ＳＯ４介质中，钼（Ⅵ）对硫酸联氨还原乙基橙的反应有强烈的催化作用。建立了催化动力学极谱法测定痕量钼的新体系，方法线性范围为２０－３００ｎｇ／ｍＬ，检出限为３．５４ｎｇ／ｍＬ。方法应用于尿中中钼的测定，结果满意。     

Preparation of Europium Induced Conformation—specific anti—calmodulin Monoclonal Antibody

Monoclonal antibody technique was employed to detect the conformational difference of CaM induced by metal ions. A trivalent europium ion induced conformation-specific anti-calmodulin monoclonal antibody was successfully prepared with europium-saturated calmodulin as antigen.     

Application of microemulsions in determination of chromium naphthenate in gasoline by flame atomic absorption spectroscopy

A new method using microemulsified samples is presented. It is for the determination of chromium naphthenate in gasoline by flame absorption spectroscopy. The method has the advantage of simplicity, speed and the use of aqueous standards for calibration instead of organic standards. Coexistent elements do not disturb the determination. Results obtained by this method were better than those obtained by other methods for the same samples.     

双核金属酞菁类化合物催化脱硫机理研究Ⅳ──中心金属离子对MPc－PcM催化活性的影响

实验研究结果表明双核金属酞菁类化合物ＭＰｃ－ＰｃＭ（Ｍ＝Ｖ、Ｃｒ、Ｍｎ、Ｆｅ、Ｃｏ、Ｎｉ、Ｃｕ）是催化Ｈ＿２Ｓ液相氧化反应的良好催化剂，且其催化活性顺序为Ｃｏ＞Ｎｉ＞Ｖ＞Ｆｅ＞Ｃｕ＞Ｃｒ＞Ｍｎ．采用量子化学理论计算方法（ＩＮＤＯ／Ｓ）分析了其前线分子轨道的构成特征，结果表明这几种ＭＰｃ－ＰｃＭ的ＬＵＭＯ轨道皆为有金属离子参与形成的π轨道，但ＨＯＭＯ轨道间的差异却很大．Ｍ＝Ｃｏ、Ｎｉ、Ｃｕ、Ｃｒ时，其ＨＯＭＯ为π轨道；而Ｍ＝Ｆｅ、Ｍｎ时，其ＨＯＭＯ却为σ轨道．正是在前线分子轨道的轨道类型、共轭程度及金属轨道贡献三方面因素的协同作用下，才导致ＭＰｃ－ＰｃＭ的催化活性顺序并非按中心金属离子价电子层ｄ电子数的递变而呈现出规律性的变化．     

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

Because of its high sensitivity, wide dynamic range and relative freedom from interferences, inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the determination of trace and ultra-trace levels of elements in various fields1. Due…     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

119mSn-Mössbauer-spektren von funktionell substituierten stannylenen und ihren stannio-komplexen mit chrom,molybdän- und wolfram-carbonyl-acceptoren

^119mSn Mössbauer data for a series of base-stabilized, intermolecularly associated tin(II) compounds ith O, Cl, P and As atoms bonded to tin are compared with isomer shifts (IS) and quadrupole splittings (QS) of their stannio complex derivatives with Cr, Mo and W carbonyls. Coordination at the tin lone-pair atom decreases IS to ca. 2.1 ± 0.2 mm s^?1 and increases the QS. QS values reflect the highly associated nature of the complexes (CO)₅MSn(Cl)E(t-Bu)₂ (M Cr, W; E  P, As) which are bridged through μ-E(t-Bu)₂ groups.