The behaviour of alkylcobalt carbonyls under “oxo” conditions

Both normal and secondary alkylcobalt carbonyls are shown not to undergo isomerization under catalytic “oxo” conditions, and the relevance of this obervation for the mechanism of the “oxo” reaction is discussed.     

Rapid determination of orotic acid in urine by a fast liquid chromatography/tandem mass spectrometric method

Quantification of orotic acid (uracil-6-carboxylic acid) in urine is an important tool to diagnose some inherited diseases, such as urea cycle disorder (OTCD) and hereditary orotic aciduria. New rapid analytical methods are necessary to provide high-throughput orotic acid analyses. A new analytical method has been developed for the rapid analysis of orotic acid in urine by liquid chromatography coupled with ion spray tandem mass spectrometry (LC/MS/MS). After a sample dilution 1:20, the analysis was performed in the selected reaction monitoring mode in which orotic acid was detected through the transition m/z 155 to 111. The retention time was 3.9 min in a 4.5-min analysis. Daily calibration between 0.5-5.0 micromol/L of orotic acid, corresponding to 10-100 micromol/L in urine before the 1:20 dilution, offered consistent linearity and reproducibility. Interassay coefficient of variance (c.v.) was 4.97% at a mean concentration of 10.99 micromol/L. The sensitivity and specificity of tandem mass spectrometry permitted a high volume of analyses of orotic acid. The sample preparation is simple, inexpensive and not time demanding.     

Heats of adsorption of linear CO species adsorbed on the Au degrees and Ti+delta sites of a 1% Au/TiO2 catalyst using in situ FTIR spectroscopy under adsorption equilibrium

The heats of adsorption of two linear CO species adsorbed on the Au degrees particles (denoted L(Au degrees)) and on the Ti(+delta) sites (denoted L(Ti+delta)) of a 1% Au/TiO(2) catalyst are determined as the function of their respective coverage by using the AEIR procedure (adsorption equilibrium infrared spectroscopy) previously developed. Mainly, the evolutions of the IR band area of each adsorbed species (2184 cm(-1) for L(Ti+delta) and at 2110 cm(-1) for L(Au degrees)) as a function of the adsorption temperature T(a), at a constant CO adsorption pressure P(CO), provide the evolutions of the coverages theta(LTi+delta) and theta(LAu degrees ) of each adsorbed CO species with T(a) in isobar conditions that give the individual heats of adsorption. It is shown that they linearly vary from 74 to 47 kJ/mol for L(Au degrees ) and from 50 to 40 kJ/mol for L(Ti+delta) at coverages 0 and 1, respectively. These values are consistent with literature data on model Au particles and TiO(2). In particular, it is shown that the mathematical formalism supporting the AEIR procedure can be applied to literature data on Au-containing solids (single crystals and model particles).     

Structural researches on the chelating behaviour of the biguanide ligand. The crystal structures of Co(C2H6N5)3 · 2H2O and Cu(C2H7N5)2CO3·4H20

Summary Crystals of the title compounds are both monoclinic, with unit cell dimensions:a = 9.293(5),b = 10.122(5),c = 16.737(7) Å. = 103.44(3)°,Z = 4, space groupP2₁/c for the cobalt derivative;a = 13.1ß5(7),b = 17.546(ß),c = 6.871(3) Å, = 107.01(4)°Z = 4, space groupP2₁/n for the copper derivative. The structures were solved from diffractometer data by the heavy-atom technique for the first compound and by direct methods for the second compound. Refinement by block diagonal least-squares gaveR = 5.9% for 3511 independent reflections andR = 8.8% for 2885 independent reflections for the cobalt and copper compound respectively. In both compounds the biguanide moiety behaves as a bidentate chelating ligand in a symmetrical tautomeric form, but it is deprotonated in the octahedral cobalt compound and neutral in the square planar copper compound.     

Time dependence of viscosity of dilute polyisobutylene solutions

Summary Shearing at constant gradient of polyisobutylene (PIB) solutions in viscous polybutene oils results in time dependent changes of their viscosities. Two PIB fractions (M=8·10⁶ and 3.8·10⁶) have been studied in a variety of solvents, covering the viscosity range from 5 to 0.5·10⁻² poise. The overall phenomenon is similar to that already observed for polymethylmethacrylate, polystyrene, and polyethylene oxide solutions in Aroclor. Results have been discussed in terms of polymer molecular weight and concentration, solvent viscosity and gradient. The systems investigated are free from strong polar interactions and tendency toward molecular aggregation; time dependent changes of viscosity are therefore observable also for true molecularly dispersed solutions.

---

Zusammenfassung Scherung mit konstantem Geschwindigkeitsgradienten von Polyisobutylen (PIB)-L?sungen in viskosen Polybuten-?len ergibt zeitabh?ngige ?nderungen ihrer Viskosit?ten. Zwei PIB-Fraktionen (M=8·10⁶ und 3,8·10⁶) wurden in einer Vielzahl von L?sungsmitteln untersucht, die den Viskosit?tsbereich von 5 bis 0,5·10⁻² Poise überdeckten. Das ph?nomenologische Erscheinungsbild ist ?hnlich dem schon beobachteten für Polymethylmethacrylat, Polystyrol und Poly?thylenoxid-L?sungen in Aroclor. Die Ergebnisse wurden hinsichtlich des Polymer-Molekulargewichts und der Konzentration, der L?sungsmittelviskosit?t und des Gradienten diskutiert. Die untersuchten Systeme sind frei von starken polaren Wechselwirkungen und von Tendenzen in Richtung auf molekulare Aggregation. Zeitabh?ngige ?nderungen der Viskosit?t sind deshalb auch für wahre molekulardisperse L?sungen beobachtbar.

     

Photochemistry of artificial photosynthetic reaction centers in liquid crystals probed by multifrequency EPR (9.5 and 95 GHz)

Photoinduced charge separation and recombination in a carotenoid-porphyrin-fullerene triad C-P-C(60)(1) have been followed by multifrequency time-resolved electron paramagnetic resonance (TREPR) at intermediate magnetic field and microwave frequency (X-band) and high field and frequency (W-band). The electron-transfer process has been characterized in the different phases of two uniaxial liquid crystals (E-7 and ZLI-1167). The triad undergoes photoinduced electron transfer, with the generation of a long-lived charge-separated state, and charge recombination to the triplet state, localized in the carotene moiety, mimicking different aspects of the photosynthetic electron-transfer process. Both the photoinduced spin-correlated radical pair and the spin-polarized recombination triplet are observed starting from the crystalline up to the isotropic phase of the liquid crystals. The W-band TREPR radical pair spectrum has allowed unambiguous assignment of the spin-correlated radical pair spectrum to the charge-separated state C(.+)-P-C(60)(.-). The magnetic interaction parameters have been evaluated by simulation of the spin-polarized radical pair spectrum and the spin-selective recombination rates have been derived from the time dependence of the spectrum. The weak exchange interaction parameter (J = +0.5 +/- 0.2 G) provides a direct measure of the dominant electronic coupling matrix element V between the C(.+)-P-C(60)(.-) radical pair state and the recombination triplet state (3)C-P-C(60). The kinetic parameters have been analyzed in terms of the effect of the liquid crystal medium on the electron-transfer process. Effects of orientation of the molecular triad in the liquid crystal are evidenced by simulations of the carotenoid triplet state EPR spectra at different orientations of the external magnetic field with respect to the director of the mesophase. The order parameter (S = 0.5 +/- 0.05) has been evaluated.     

The Chemistry of Coumarin Derivatives. Part 5. Unusual course of the reaction of 4-hydroxycoumarin and aliphatic aldehydes

The reaction of 4-hydroxycoumarin and certain aliphatic aldehydes affords 1:1 or complex 2:2 adducts besides (or in place) of the expected 2:1 bis(coumarin) adducts. Reaction with heptanal, cyclohexanecarbaldehyde, and pivalaldehyde are reported as representative. The structure of the reaction products was established by spectroscopical techniques, including X-ray analysis, and their formation was mechanistically rationalized. Some of the 1:1 adducts are synthetically useful for the preparation of 3-alkyl-4-hydroxycoumarins.     

A Comparative Study on the Reinforcing Effect of Aramide and PET Short Fibers in a Natural Rubber-Based Composite

Four types of chopped fibers have been studied as reinforcement additives in a standard natural rubber based, carbon black filled formulation. The fibers studied were aramide (2 types) and polyester (2 types). The chopped fibers were added on top of the carbon black filled rubber compound at 2, 4, and 8 phr levels. The extra reinforcing effect in the modulus, especially at low elongation, the increase in hardness, the anisotropic properties, and the stiffening effects have been studied together with the evaluation of the mechanical hysteresis in strain and in compression. The permanent set of the resulting rubber compounds have been evaluated as well. The best compromise in performances and price was found for a certain type of polyester fiber.