Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

New 1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidine derivatives II

The 7‐chloro‐3‐(2‐chlorobenzyl)‐ and 7‐chloro‐3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐d]pyrimidines ( 1 and 4 ), by nucleophilic replacement with some hydrazides, gave the corresponding 7‐hydrazidoderivatives ( 2a‐e and 5a‐e ). These, by heating in Dowtherm, underwent an intramolecular cyclization to form the new tricyclic 7‐substituted‐3‐(2‐chlorobenzyl)‐ and 3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidines ( 3a‐d and 6a‐d ). The 7‐hydrazino‐3‐(2‐chlorobenzyl)‐ and 7‐hydrazino‐3‐(2‐fluorobenzyl)‐triazolo‐pyrimidines ( 9a and 9b ) were also prepared via the corresponding mercapto ( 7a and 7b ) and thiomethyl ( 8a and 8b ) derivatives.     

Heats of adsorption using temperature programmed adsorption equilibrium: application to the adsorption of CO on Cu/A12O3 and H2 on Pt/Al2O3

A new simple analytical procedure is described that allows the determination of the heats of adsorption (denoted E(theta)) of adsorbed species at several coverages (theta's) using a single experiment. This procedure is an extension of an original method previously developed (denoted AEIR: adsorption equilibrium infrared spectroscopy). A mass spectrometer is used to determine the amounts of gas (in the present study, CO and H2) either desorbed from or adsorbed on a metal supported catalyst (4.7% Cu/Al2O3 and 2.9% Pt/Al2O3) during the perturbation of the adsorption equilibrium due to a controlled change of the adsorption temperature (Ta) at a quasi-constant adsorption pressure (Pa). These amounts allow us to follow the evolution of the adsorption equilibrium coverage (theta(e)) with Ta at the quasi-constant partial pressure (Pa). Then, the curve theta(e) = f(Ta) provides Etheta = f(theta) with the support of an adsorption model. This procedure presents several advantages as compared to the TPD methods, in particular, considering the theoretical supports linked to the exploitation of the experimental data. As compared to AEIR, the TPAE procedure allows one to study the heats of adsorption of adsorbed species that are not detectable by IR. However, it is not adapted if surface reactions occur in parallel to adsorption/desorption processes.     

Zn(II) coordination to polyamine macrocycles containing dipyridine units. New insights into the activity of dinuclear Zn(II) complexes in phosphate ester hydrolysis

Zn(II) binding by the dipyridine-containing macrocycles L1-L3 has been analyzed by means of potentiometric measurements in aqueous solutions. These ligands contain one (L1, L2) or two (L3) 2,2'-dipyridine units as an integral part of a polyamine macrocyclic framework having different dimensions and numbers of nitrogen donors. Depending on the number of donors, L1-L3 can form stable mono- and/or dinuclear Zn(II) complexes in a wide pH range. Facile deprotonation of Zn(II)-coordinated water molecules gives mono- and dihydroxo-complexes from neutral to alkaline pH values. The ability of these complexes as nucleophilic agents in hydrolytic processes has been tested by using bis(p-nitrophenyl) phosphate (BNPP) as a substrate. In the dinuclear complexes the two metals play a cooperative role in BNPP cleavage. In the case of the L2 dinuclear complex [Zn(2)L2(OH)(2)](2+), the two metals act cooperatively through a hydrolytic process involving a bridging interaction of the substrate with the two Zn(II) ions and a simultaneous nucleophilic attack of a Zn-OH function at phosphorus; in the case of the dizinc complex with the largest macrocycle L3, only the monohydroxo complex [Zn(2)L3(OH)](3+) promotes BNPP hydrolysis. BNPP interacts with a single metal, while the hydroxide anion may operate a nucleophilic attack. Both complexes display high rate enhancements in BNPP cleavage with respect to previously reported dizinc complexes, due to hydrophobic and pi-stacking interactions between the nitrophenyl groups of BNPP and the dipyridine units of the complexes.     

Plasma antioxidant capacity determination: comparative evaluation of chemiluminescent and spectrophotometric assays

All aerobic organisms have developed different mechanisms for neutralising the free radicals, mostly produced by the monoelectronic reduction of O(2), and preventing the severe damages these can provoke. The efficiency of these mechanisms can be assessed, in different matrices, by a simple and direct chemiluminescent assay (CL) based on luminol oxidation catalysed by horseradish peroxidase. Light emission is mediated by the production of free radicals and it is inhibited after a sample addition in a way that is directly proportional to the sample total content of molecules displaying antioxidant activity. The performances of this chemiluminescent assay were compared with those of two spectrophotometric methods already applied in clinical practice. First spectrophotometric method measures, like CL assay, the total antioxidant capacity, whereas the second one determines free thiol groups content. The chemiluminescent assay has a linearity interval between 0.60 and 9.46 mumol l(-1) of Trolox (y=34.91x+3.10; r=0.999; n=5) with an imprecision, expressed as CV, of 3.8% and an inaccuracy, expressed as percentage recovery, of 109%. The first spectrophotometric method, based on the same reference standard, the Trolox molecule, has a linearity interval between 0.2 and 2.5 mmol l(-1) of Trolox (y=-0.01x+4.54; r=0.95; n=5); the thiol groups assay has a linearity interval between 0.1 and 1 mmol l(-1) of l-cysteine (y=1.68x-47.09; r=0.998; n=5). Different clinical samples of plasma from healthy individuals, obese subjects and patients with liver diseases were tested. Interesting correlations were obtained among the three methods, but no significant correlations emerged between antioxidant capacity and clinical parameters. Significant differences were there only between men and women among obese subjects and between drinkers and non-drinkers among liver disease patients.     

Statistical experimental design-driven discovery of room-temperature conditions for palladium-catalyzed cyanation of aryl bromides

A combination of Pd₂(dba)₃·CHCl₃ (0.5 mol %) and commercially available, air-stable phosphonium salt [(t-Bu)₃PH]BF₄ (1.4 mol %) in a presence of Zn powder and Zn(CN)₂ as the cyanide source comprises an extremely efficient catalyst system for the cyanation of a diverse array of aryl bromides, at room temperature. This result emerged from an experimental strategy that combines the advantages of parallel, automated experimentation with the design of experiments (DOE) for the effective definition of an optimal set of reaction conditions.     

Use of experimental design for the purge-and-trap-gas chromatography-mass spectrometry determination of methyl tert.-butyl ether,tert.-butyl alcohol and BTEX in groundwater at trace level

An efficient method for the simultaneous determination of methyl tert.-butyl ether, tert.-butyl alcohol, benzene, toluene, ethylbenzene and xylene isomers in groundwater by purge-and-trap-gas chromatography-mass spectrometry was developed and validated. Experimental design was used to investigate the effects of temperature of extraction, time of extraction and percentage of salt added to the water samples. Regression models and desirability functions were applied to find the experimental conditions providing the highest global extraction yield. Validation was carried out in terms of limits of detection (LOD), limits of quantitation (LOQ), linearity and precision. LOD values ranging from 2.6 to 23 ng l(-1) were achieved, whereas linearity was statistically verified over two orders of magnitude for each compound. Precision was evaluated testing two concentration levels. Good results were obtained both in terms of intra-day repeatability and intermediate precision: RSD% lower than 4.5% at the highest concentration and lower than 13% at the lowest one were calculated for intra-day repeatability. A groundwater sample suspected of contamination by leaking underground petroleum storage tanks was analysed and some of the analytes were detected and quantitated.     

Gold-catalyzed reactions of 2-alkynyl-phenylamines with alpha,beta-enones

[reaction: see text] The gold-catalyzed reaction of 2-alkynyl-phenylamines with alpha,beta-enones represents a new general one-pot entry into C-3-alkyl-indoles by sequential reactions. Gold-catalyzed sequential cyclization/alkylation, N-alkylation/cyclization, or N-alkylation/cyclization/alkylation reactions leading to different indoles can be directed by changing the 2-alkynyl-phenylamine 1/alpha,beta-enone 3 ratio and the reaction temperature. Unusual gold-catalyzed rearrangement reaction of indoles are observed at 140 degrees C. New gold-catalyzed formation of propargyl-alkyl ether under mild conditions and the hydration reaction of N-acetyl-2-ethynyl-phenylamine are reported.     

Environmentally degradable bio-based polymeric blends and composites

Blends and composites based on environmentally degradable-ecocompatible synthetic and natural polymeric materials and fillers of natural origin have been prepared and processed under different conditions. Poly(vinyl alcohol) (PVA) was used as the synthetic polymer of choice by virtue of its capability to be processed from water solution or suspension as well as from the melt by blow extrusion and injection molding. Starch and gelatin were taken as the polymeric materials from renewable resources. The fillers were all of natural origin, as waste from food and agro-industry consisted of sugar cane bagasse (SCB), wheat flour (WF), orange peels (OR), apple peels (AP), corn fibres (CF), saw dust (SD) and wheat straw (WS). All the natural or hybrid formulations were intended to be utilized for the production of: a) Environmentally degradable mulching films (hydro-biomulching) displaying, in some cases, self-fertilizing characteristics by in situ spraying of water solutions or suspensions; b) Laminates and containers to be used in agriculture and food packaging by compression and injection molding followed by baking. Some typical prototype items have been prepared and characterized in relation to their morphological and mechanical properties and tested with different methodology for their propensity to environmental degradation and biodegradation as ultimate stage of their service life. A relationship between chemical composition and mechanical properties and propensity to biodegradation has been discussed in a few representative cases.