N-terminal and C-terminal domains of arrestin both contribute in binding to rhodopsin

Visual arrestin terminates the signal amplification cascade in photoreceptor cells by blocking the interaction of light activated phosphorylated rhodopsin with the G-protein transducin. Although crystal structures of arrestin and rhodopsin are available, it is still unknown how the complex of the two proteins is formed. To investigate the interaction sites of arrestin with rhodopsin various surface regions of recombinant arrestin were sterically blocked by different numbers of fluorophores (Alexa 633). The binding was recorded by time-resolved light scattering. To accomplish site-specific shielding of protein regions, in a first step all three wild-type cysteines were replaced by alanines. Nevertheless, regarding the magnitude and specificity of rhodopsin binding, the protein is still fully active. In a second step, new cysteines were introduced at selected sites to allow covalent binding of fluorophores. Upon attachment of Alexa 633 to the recombinant cysteines we observed that these bulky labels residing in the concave area of either the N- or the C-terminal domain do not perturb the activity of arrestin. By simultaneously modifying both domains with one Alexa 633 the binding capacity was reduced. The presence of two Alexa 633 molecules in each domain prevented binding of rhodopsin to arrestin. This observation indicates that both concave sites participate in binding.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Copper-Promoted N-Arylation of the Imidazole Side Chain of Protected Histidine by Using Triarylbismuth Reagents

The N-arylation of the side chain of histidine by using triarylbismuthines is reported. The reaction is promoted by copper(II) acetate in dichloromethane at 40 °C under oxygen in the presence of diisopropylethylamine and 1,10-phenanthroline and allows the transfer of aryl groups with substituents at any position of the aromatic ring. The reaction shows excellent functional group tolerance and is applicable to dipeptides where the histidine is located at the N terminus. A histidine-guided backbone N−H arylation was observed in dipeptides where the histidine occupies the C terminus.     

A new HPLC–DAD method for contemporary quantification of 10 antibiotics for therapeutic drug monitoring of critically ill pediatric patients

The common practice of therapeutic drug monitoring (TDM) involves the quantification of drug plasma concentrations at a specific time in a dosing window. Although TDM for antibiotics is not considered mandatory, it may represent a valid tool for clinicians in order to limit antibiotic resistance and avoid therapeutic failures. The aim of our study was to develop and validate a high-performance liquid chromatography–diode array detection method for simultaneous quantification of 10 antibiotics in plasma. This method has a fast analytical procedure that uses the same chromatographic conditions to quantify ceftazidime, ceftriaxone, meropenem, ertapenem, ciprofloxacin, tigecycline, ampicillin, levofloxacin and piperacillin, plus the β-lactamase inhibitor tazobactam. Method validation was ensured by testing selectivity, accuracy, precision, limits of detection and quantification, recovery and stability. The calibration ranges, established accordingly to the expected plasma concentration in patients, showed a coefficient of determination >0.996 for all compounds. Within- and between-days precisions reported a coefficient of variation >15%. Similarly, the accuracy evaluation reported a relative standard deviation of <10% for each antibiotic. The recovery ranged between 97 and 103% for all compounds. This method could represent a useful tool for TDM of antibiotics.     

Synthesis of Poly(2‐oxazoline)‐Based Hydrogels with Tailor‐Made Swelling Degrees Capable of Stimuli‐Triggered Compound Release

A 32‐membered library of poly(2‐oxazoline)‐based hydrogels of the composition p EtOx _m‐p PhOx _n‐p PBO _q (m/n = 150/0, 100/50, 50/100, and 0/150; q = 1.5–30) was prepared from 2‐ethyl‐ ( EtOx ), 2‐phenyl‐2‐oxazoline ( PhOx ), and phenylene‐1,3‐bis‐(2‐oxazoline) ( PBO ). The polymerizations were performed from ground monomer mixtures at 140 °C in a single‐mode microwave reactor in reaction times as short as 1 h. Purified hydrogels, containing no residual monomers, were obtained in yields of 95% or higher. Acid‐mediated hydrolysis rates as well as swelling degrees of the hydrogels were adjustable over a broad range; swelling degrees in water/ethanol/dichloromethane ranged from 0 to 13.8/11.7/20.0. The hydrogels could incorporate organic molecules according to in situ or post‐synthetic routines. Post‐synthetic routines enabled for the preparation of hydrogels from which the incorporated compounds were only released through diffusion processes if the solvent was changed or through hydrogel degradation if the pH was lowered.     

Temperature measurement using infrared thermometry within semi-transparent media

ABSTRACT

Infrared thermometry is a widely used technique for contactless temperature measurement, which is often conducted through semi-transparent media. In the present work, influences on the measurement results stemming from semi-transparent media and from the optical characteristics of the measurement setup are discussed. Results of two experimental setups, containing low, medium, and high transmission media are presented and compared to calculated data using a one-dimensional analytical approach and a three-dimensional ray-tracing algorithm. It is shown through modeling and experiments that the surroundings and, in particular, the (semi)transparent materials within the optical path are critical for accurate temperature measurements.     

Characterization of Staphylococcus aureus strains isolated from Italian dairy products by MALDI-TOF mass fingerprinting

Staphylococcus aureus is a known pathogen, causing serious food-borne intoxications due to the production of enterotoxins, being otherwise a major cause of mastitis. In this sense, the detection of S. aureus is an important issue for the food industry to avoid health hazards and economic losses. The present work applied MALDI-TOF MS for the classification of 40 S. aureus strains, 36 isolated from Italian dairy products and four from human samples. All isolated strains were clearly identified as S. aureus by their spectral fingerprints. The peak masses m/z 3444, 5031, and 6887 were determined to be specific biomarkers for S. aureus. Furthermore, clustering of the peak mass lists was successfully applied as a typing method, resulting in eight groups of strains. This is the first time that a detailed spectral comparison was carried out and characteristic peak masses were determined for every spectral group. Three strains exhibited a peak at m/z 6917 instead of m/z 6887, which was related to four polymorphisms in their 16S rRNA sequences. However, the grouping obtained by MALDI-TOF MS fingerprinting could not be related to toxin production or to the origin of the strains.     

The effects of substituents and solvents on the ground-state π-electronic structure and electronic absorption spectra of a series of model merocyanine dyes and their theoretical interpretation

Two series of new merocyanine dyes have been synthesised and the dependence of their electronic structure on substituents and solvents has been studied by NMR spectroscopy, by using both the NMR (13)C chemical shifts between adjacent C atoms in the polymethine chain and the (3)J(H,H) coupling constants for trans-vicinal protons. The widely used valence bond (VB) model based on two contributing structures cannot account theoretically for the observed alternating π-electron density in the polymethine chain. In addition, the prediction of zero-π-bond order alternation (or zero-bond length alternation) by this model is also incorrect. However, the results are consistent with the predictions of a qualitative VB model which considers the resonance of a positive charge throughout the whole polymethine chain. Based on this model and the Franck-Condon principle the effect of substituents and solvents on the fine structure of the electronic spectra of these dyes can be explained as vibronic transitions from the vibrational state v = 0 to v', where v is the vibrational quantum number of the totally symmetric C=C valence vibration of the polymethine chain in the electronic ground state and v' is that in the electronic excited state. In contrast, neither the effects of substituents or solvents on the electronic structure of merocyanines and their electronic spectra can be accounted for by the simple two state VB model.