Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Viscosity Mixing Rules for Binary Systems Containing One Ionic Liquid

In this work the applicability of four of the most commonly used viscosity mixing rules to [ionic liquid (IL)+molecular solvent (MS)] systems is assessed. More than one hundred (IL+MS) binary mixtures were selected from the literature to test the viscosity mixing rules proposed by 1) Hind (Hi), 2) Grunberg and Nissan (G–N), 3) Herric (He) and 4) Katti and Chaudhri (K–C). The analyses were performed by estimating the average (absolute or relative) deviations, AADs and ARDs, between the available experimental data and the predicted ideal mixture viscosity values obtained by means of each rule. The interaction terms corresponding to the adjustable parameters inherent to each rule were also calculated and their trends discussed.     

Cleansing contaminated seawaters using marine cyanobacteria: evaluation of trace metal removal from the medium

The use of microbial biomass in biosorption is already being studied as a potential alternative to (or combined with) conventional processes, where several algae and microorganisms have already shown promising ability to uptake metals. Cyanobacteria (blue-green algae) are widespread organisms, with specific properties, such as high nutrient removal capacity and tolerance to highly variable conditions which make them well-suited for wastewater and remediation purposes. The main aim of this work was to evaluate the use of a marine cyanobacterium LEANCYA 21 (Synechocystis sp.), collected from the Portuguese southern border, for the removal of selected trace metals when in natural seawater culture medium. It was observed, for the first time, that this particular strain is capable of uptaking Pb, Ni and Zn (at nM levels) from seawater solutions using small amounts of biomass. Uptake values for Pb were up to 90% (0.75 mg g^?1 biomass) in 6 h. The specific biosorption curves of Ni and Zn showed that these metals follow a first order kinetics biosorption in batch conditions. Solutions containing multimetals have revealed that Ni uptake is affected by the presence of Pb and Zn. The calculated specific absorption values were high enough to predict a possible application in aquaculture where such low levels of metals may inhibit microalgae growth.     

Sedimentary process inferences from Humic substances analysis and deposition rates (Western Ross Sea,Antarctica)

The first 40?cm of sediment of three basins in the Ross Sea were sampled using a box corer. Site Y1 was located close to the coast in Terra Nova Bay; the sediment of site Y3 was collected in a more distal basin in the central sector of the Ross Sea; finally site Y5 was sampled in the deepest zone of the Joides Basin.

Sediment cores were sliced and analysed with a depth resolution of 2–4.5?cm. The distribution of humic substances and their structural features along the cores were determined and related to the pattern of Total Organic Carbon (TOC) and sedimentological data. The grain size distribution and the ²¹⁰Pb inventories allow the sediment of the study sites to be characterised.

The humic substance content in the sediment decreases, with a change in slope between 23 and 26?cm at Y1, between 12 and 15?cm at Y3 and constant values with further depth. At Y5 the depth profile of humic substance content shows constant values in the upper 17?cm and values decrease with further depth. The pattern of humic substance yield is similar to that found for TOC. The analysis of the elemental composition of the humic acids extracted from different sediment depths shows an increasing C/N atomic ratio at sites Y1 and Y3 and constant values along the Y5 core. The depth profile of the C/N atomic ratio is confirmed by the changes observed in the structural characterisation and indicates a shift from the freshly deposited organic matter on the sediment surface to more humified material (humin). The results obtained highlight a different sedimentation rate at the three sites as deduced from sedimentological analysis.     

The meta and para OH Substitution Effect on C-Phenyl-Nitrilimine Bond-Shift Isomers

The geometric and electronic structure of 1,3-dipolar species, in particular of nitrile imines, can be surprisingly intricate. A particular example is the C-phenyl-nitrilimine, which exists as two energy minima that constitute bond-shift isomers. To examine the effect of substituents in the phenyl ring, here we investigate the meta and para OH substituted derivatives. These two nitrile imines were generated in an argon matrix by UV-irradiation of 2H-tetrazole precursors and found to photoisomerize to carbodiimides via 1H-diazirines. The different effects of the OH substitution in meta and para positions on the bond-shift isomerism are rationalized with the support of Natural Resonance Theory and Hirshfeld atomic charges. The understanding of how substitution affects the structural characteristics of C-phenyl-nitrilimines, opens a door to modulate the chemistry of those compounds (e. g. in cycloaddition reactions) by appropriate tuning of their substitution (substituent type and position).     

Osteoarthritis subjects have differentiated lower extremity thermal skin response after the concurrent acute training session

Journal of Thermal Analysis and Calorimetry - This study investigated the thermal skin (Tsk) response of lower limbs in older adults with or without osteoarthritis before and after a concurrent...     

Co-Fermentation of Cheese Whey and Crude Glycerol in EGSB Reactor as a Strategy to Enhance Continuous Hydrogen and Propionic Acid Production

This study evaluated the production of hydrogen and propionic acid in an expanded granular sludge bed (EGSB) reactor by co-fermentation of cheese whey (CW) and crude glycerol (CG). The reactor was operated at hydraulic retention time (HRT) of 8 h by changing the CW/CG ratio from 5:1 to 5:2, 5:3, 5:4, and 5:5. At the ratio of 5:5, HRT was reduced from 8 to 0.5 h. The maximum hydrogen yield of 0.120 mmol H₂ g COD^?1 was observed at the CW/CG ratio of 5:1. Increasing the CG concentration repressed hydrogen production in favor of propionic acid, with a maximum yield of 6.19 mmol HPr g COD^?1 at the CW/CG ratio of 5:3. Moreover, by reducing HRT of 8 to 0.5 h, the hydrogen production rate was increased to a maximum value of 42.5 mL H₂ h^?1 L^?1at HRT of 0.5 h. The major metabolites were propionate, 1,3-propanediol, acetate, butyrate, and lactate.     

Regio- and Stereochemical Aspects of the Palladium-Catalyzed Desilylation-Arylation of Substituted Vinylsilanes

The palladium-catalyzed desilylation-arylation of substituted vinylsilanes by p-iodoanisole in the presence of bidentate phosphine ligands is described. Apart from enhancing the rate of the reaction considerably, heteroatom-based functional groups in the vinylsilane moiety have a profound influence on the regiochemistry. A catalytic cycle for the chelation-controlled desilylation-arylation reaction involving five- and six-membered chelate rings is proposed.     

Dose response of A-type carbonated apatites prepared under different conditions

Irradiated A-type carbonated apatites with carbonate content ranging from 1.45% to 4.84% are studied by using electron paramagnetic resonance (EPR). The EPR spectra are mainly constituted of lines associated to axial CO₂⁻ species (g=2.0028 and g=1.9973) and orthorhombic CO₃⁻ species (g₁=2.0170, g₂=2.0090 and g₃=2.0041). The production of CO₂⁻ species on gamma irradiation depends on the carbonate concentration and the hydroxyapatite stoichiometry. The lowest dose detection limit was achieved with stoichiometric samples and carbonate concentration of 3.7%.