Observation of two new N* peaks in J/psi-->ppi-n and ppi+n decays

The decay J/psi-->NNpi provides an effective isospin 1/2 filter for the piN system due to isospin conservation. Using 58x10(6) J/psi decays collected with the Beijing Electromagnetic Spectrometer at the Beijing Electron Positron Collider, more than 100 thousand J/psi-->ppi-n+c.c. events are obtained. Besides the two well-known N* peaks at around 1500 MeV/c2 and 1670 MeV/c2, there are two new, clear N* peaks in the ppi invariant mass spectrum around 1360 MeV/c2 and 2030 MeV/c2 with statistical significance of 11sigma and 13sigma, respectively. We identify these as the first direct observation of the N*(1440) peak and a long-sought missing N* peak above 2 GeV/c2 in the piN invariant mass spectrum.     

Ag-N共掺p型ZnO的第一性原理研究

采用基于密度泛函理论的第一性原理赝势法对Ag-N共掺杂ZnO体 系以及间隙N和间隙H掺杂p型ZnO: (Ag, N)体系的缺陷形成能和离化能进行了研究. 结果表明, 在Ag_Zn和N_O所形成的众多受主复合体中, Ag_Zn-N_O受主对不仅具有较低的缺陷形成能同时其离化能也相对较小, 因此, Ag_Zn-N_O受主对的形成是Ag-N共掺ZnO体系实现p型导电的主要原因. 研究发现, 当ZnO: (Ag, N)体系有额外间隙N原子存在时, Ag_Zn-N_O受主对容易与N_i形成Ag_Zn-(N₂)_{m O}施主型缺陷, 该施主缺陷的形成降低了Ag-N共掺ZnO的掺杂效率因而不利于p型导电. 当间隙H引入到ZnO: (Ag, N)体系时, H_i易与Ag_Zn-N_O受主对形成 受主-施主-受主复合结构(Ag_Zn-H_i-N_O), 此复合体的形成不仅提高了Ag_Zn-N_O受主对在ZnO中的固溶度, 同时还能使其受主能级变得更浅而有利于p型导电. 因此, H辅助Ag-N共掺ZnO可能是一种有效的p型掺杂手段. 关键词： p型ZnO 缺陷形成能 受主离化能 第一性原理     

Valorization of Rice Straw via Hydrotropic Lignin Extraction and Its Characterization

Rice straw hydrotropic lignin was extracted from p-Toluene sulfonic acid (p-TsOH) fractionation with a different combined delignification factor (CDF). Hydrotropic lignin characterization was systematically investigated, and alkaline lignin was also studied for the contrast. Results showed that the hydrotropic rice straw lignin particle was in nanometer scopes. Compared with alkaline lignin, the hydrotropic lignin had greater molecular weight. NMR analysis showed that β-aryl ether linkage was well preserved at low severities, and the unsaturation in the side chain of hydrotropic lignin was high. H units and G units were preferentially degraded and subsequently condensed at high severity. High severity also resulted in the cleavage of part β-aryl ether linkage. ³¹P-NMR showed the decrease in aliphatic hydroxyl groups and the increasing carboxyl group content at high severity. The maximum weight loss temperature of the hydrotropic lignin was in the range of 330–350 °C, higher than the alkaline lignin, and the glass conversion temperature (T_g) of the hydrotropic lignin was in the range of 107–125 °C, lower than that of the alkaline lignin. The hydrotropic lignin has high β-aryl ether linkage content, high activity, nanoscale particle size, and low T_g, which is beneficial for its further valorization.     

Electrostatic discharge effect on safe distance determination for 500 kV ac power line's helicopter inspection

The effect of electrostatic discharge on safe distance determination for 500 kV ac transmission line's helicopter inspection is investigated. Potential difference exists while helicopter is near the power transmission line, which is harmful to the inspection persons. The electric field in the helicopter cabin is calculated when it is near the power line. The result indicates that the potential difference becomes higher with the decrease of the distance between the helicopter and transmission line. Considering the discharge energy and the guarantee of the persons' safety, the safe distance for 500 kV ac transmission lines is determined as d ≥ 15 m.     

Influence on drug efficacy of the binding behavior of pioglitazone hydrochloride with tryptophan residues,and tyrosine residues in bovine transferrin

Abstract

The interaction of pioglitazone hydrochloride bound to tryptophan residues and tyrosine residues in bovine transferrin was investigated using synchronous fluorescence spectroscopy at various temperatures (298, 310, and 318?K). From binding constants and thermodynamic parameters, it was shown that 1:1 stable compound was formed by the electrostatic force interaction of pioglitazone hydrochloride bound to tryptophan residues and tyrosine residues in bovine transferrin. The extent of binding between pioglitazone hydrochloride and tryptophan residues in bovine transferrin was more than that between pioglitazone hydrochloride and tyrosine residues in bovine transferrin. At 310?K, the fluorescence quenching ratio number of tyrosine residues and tryptophan residues in bovine transferrin were 47.52% and 54.19%, respectively, which indicated that the fluorescence contribution of tryptophan residues was greater. At 310?K, pioglitazone hydrochloride-tyrosine residues(in bovine transferrin) binding rate were 55.60–73.82%, and the combined model was W?=??0.0315R²???0.1520R?+?0.7385. The value of Hill’s coefficients was greater than 1, which suggested that there was a positive cooperativity between pioglitazone hydrochloride and subsequent ligands. The results of molecular docking were consistent with that of experimental calculation.     

Transition‐Metal Chemistry of Alkaline‐Earth Elements: The Trisbenzene Complexes M(Bz)3 (M=Sr,Ba)

We report the synthesis and spectroscopic identification of the trisbenzene complexes of strontium and barium M(Bz)₃ (M=Sr, Ba) in low‐temperature Ne matrix. Both complexes are characterized by a D₃ symmetric structure involving three equivalent η⁶‐bound benzene ligands and a closed‐shell singlet electronic ground state. The analysis of the electronic structure shows that the complexes exhibit metal–ligand bonds that are typical for transition metal compounds. The chemical bonds can be explained in terms of weak donation from the π MOs of benzene ligands into the vacant (n?1)d AOs of M and strong backdonation from the occupied (n?1)d AO of M into vacant π* MOs of benzene ligands. The metals in these 20‐electron complexes have 18 effective valence electrons, and, thus, fulfill the 18‐electron rule if only the metal–ligand bonding electrons are counted. The results suggest that the heavier alkaline earth atoms exhibit the full bonding scenario of transition metals.     

Crystal structures and fluorescence properties of two architecture-correlated Zn(II)/Cd(II) MOFs constructed from an unprecedented tri-triazole ligand

By employing an unprecedented tri-triazole ligand, 4-amino-3,5-bis-(1H-1,2,4-triazole)-1,2,4-triazole (H₂L), two Zn(II)/Cd(II) metal-organic frameworks (MOFs), [ZnL]·3H₂O (1) and [CdL]·H₂O (2), were successfully synthesized and characterized. In the two complexes, M(II) centers are chelated and bridged by L bridges to form a one-dimensional (1-D) 4₁ helical chain in 1 with high-symmetry Pbca, and a 2₁ helical chain in 2 with lower symmetry P2₁/n, respectively. The two chains are further linked by L into two structure-correlated three-dimensional (3-D) architectures. PXRD and TG analysis confirmed the phase purity and stability of 1 and 2. The solid-state fluorescence properties of the prepared MOF revealed a maximum emission at 382?nm and 393?nm (λ_ex = 330?nm), ascribing to the intra-ligand transitions. Interestingly, an additional strong emission peak at 516?nm can be observed in 1 (below 400?°C), while the emission was silenced in 2. The additional emission band may be attributed to the subtle difference of architectural features and coordination configurations between in 1 and 2.     

Regioisomerism effect (RIE) on optimizing ultralong organic phosphorescence lifetimes

Organic phosphorescence materials demonstrate potential optoelectronic applications due to their remarkably ultralong organic phosphorescence (UOP) lifetime and abundant optical characteristics prior to the fluorescence materials. For a better insight into the intrinsic relationship among regioisomeric molecules, crystalline interactions, and phosphorescence properties, three crystalline dicarbazol-9-yl pyrazine-based regioisomers with para-, meta-, and ortho-convergent substitutions (p-DCzP, m-DCzP, and o-DCzP) were designed and presented gradually increased UOP lifetimes prolonging from 63.14, 127.93 to 350.46 ms, respectively, due to the regioisomerism effect (RIE) which would be an effective strategy for better understanding of structure-property of UOP materials.     

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Due to the difficulty in achieving high efficiency and high color purity simultaneously, blue emission is the limiting factor for the performance and stability of OLEDs. Since 2003, we have been working on organic light‐emitting diodes (OLEDs), especially on blue light. After a series of molecular designs, novel strategies have been proposed from different aspects. At first, highly efficient deep blue emission could be achieved through molecular design with highly twisted structure to suppress fluorescence quenching and redshift. Deep blue emitters with high efficiency in solid state, a twisted structure with aggregation induced emission (AIE) characteristics was incorporated to inhibit molecular aggregation, and triplet‐triplet fusion (TTF) and hybridized localized charge transfer (HLCT) were adopted to increase the ratio of triplet exciton used. Secondly, a highly efficient blue OLED could be achieved through improving charge transport. New electron transport materials (ETMs) with wide band gap were developed to control charge transport balance in devices. Thirdly, a highly efficient deep blue emission could be achieved through a mesoscopic structure of out‐coupling layer. A mesoscopic photonic structured organic thin film was fabricated on the top of metal electrode by self‐aggregation in order to improve the light out‐coupling efficiency.     

Effects of low-frequency biasing on spontaneous otoacoustic emissions: amplitude modulation

The dynamic effects of low-frequency biasing on spontaneous otoacoustic emissions (SOAEs) were studied in human subjects under various signal conditions. Results showed a combined suppression and modulation of the SOAE amplitudes at high bias tone levels. Ear-canal acoustic spectra demonstrated a reduction in SOAE amplitude and growths of sidebands while increasing the bias tone level. These effects varied depending on the relative strength of the bias tone to a particular SOAE. The SOAE magnitudes were suppressed when the cochlear partition was biased in both directions. This quasi-static modulation pattern showed a shape consistent with the first derivative of a sigmoid-shaped nonlinear function. In the time domain, the SOAE amplitudes were modulated with the instantaneous phase of the bias tone. For each biasing cycle, the SOAE envelope showed two peaks each corresponded to a zero crossing of the bias tone. The temporal modulation patterns varied systematically with the level and frequency of the bias tone. These dynamic behaviors of the SOAEs are consistent with the shifting of the operating point along the nonlinear transducer function of the cochlea. The results suggest that the nonlinearity in cochlear hair cell transduction may be involved in the generation of SOAEs.