水溶液中锌粉促进邻二醇合成的研究

邻二醇是有机合成中重要的合成子,是合成烯烃、酮类化合物的重要中间体,广泛用于农药、医药等精细化工品的合成.合成邻二醇最有效的方法是羰基化合物的还原偶联,通常由羰基化合物与相应的金属试剂或金属络合物作用而实现,往往反应时间长,要求的条件苛刻,有的收率比较低.     

磷酸三丁酯从硝酸介质中萃取铀（Ⅵ）的动力学研究

用上升单液滴法和恒界面池法研究了磷酸三丁酯-环己烷从硝酸介质中萃取铀(Ⅵ)的动力学。萃取过程为扩散控制,得到了在扩散控制下影响萃取速率的一些规律。     

UV LASER INITIATED STEREOSELECTIVE HOMOGENEOUS CATALYSIS POLYMERIZATION OF PHENYLACETYLENE

In this paper, the stereoselective homogeneous catalysis polymerization of phenylacetylene by using two kinds of catalysts W(CO)_5CH_3I and W(CO)_4I_2 produced from UV laser photolysis of W (CO)_6 in CH_3I, I_2—C_6H_6 and CHI_3—C_6H_6 respectively was studied. The effects of laser energy, laser irradiation time and lifetime of catalyst on the polymerization of phenylacetylene were discussed. The photoproducts of W (CO)_6 in CH_3I, I2—C_6H_6 and CHI_3—C_6I_6 were determined by IR spectra. The structures of polyphenylacetylene obtained by W (CO)_5CH_3I and W (CO)_4I_2 catalysts were characterized by IR spectra and ~1H NMR spectra.     

混杂[2, 3, 9, 10, 16, 17, 23, 24-八(庚基)酞菁][四(4-吡啶 基)卟啉]合钇 (III)二层配合物的合成及其谱学和电化学性质

用四(4-吡啶基)卟啉(H~2TPyP)与乙酰丙酮钇(III)[Y(acac)~3.H~2O]反应,生成单层配合物Y(TPyP)(acac)。将其与4,5-二(庚基)二氰基苯混和,后者在DBU催化下发生四聚反应,生成混杂[2,3,9,10,16,17,23,24-八(庚基)酞菁][四(4-吡啶基)卟啉]合钇(III)二层配合物Y(TPyP)[Pc(C~7H~1~5)~8]。该化合物用紫外-可见、近红外、红外及质谱等进行了表征,并用循环伏安法(CV)和差示脉冲法(DP)研究了其电化学性质。     

带干扰的多险种风险模型的破产概率

将多险种风险模型推广到带干扰项的一种新模型,讨论了收益过程的性质,并利用鞅的方法得出了破产概率所满足的Lundberg不等式及其一般公式.     

V型稠密介质中脉宽对超短脉冲和频谱及其CEP依赖性的影响

利用不含慢变包络近似和旋波近似的全波Maxwell-Bloch方程组的数值解,研究脉宽对稠密V型三能级原子介质中超短激光脉冲和频谱及其载波包络位相(CEP)依赖性的影响.结果表明:脉宽较小时,脉冲分裂数目少,频谱较宽,高频部分显著,CEP的变化对脉冲及频谱的影响较大,尤其对子脉冲间的时间间隔及频谱高频部分强度大小的影响更为显著;随着脉宽的增大,脉冲分裂数目增多,频谱宽度变窄,高频部分强度明显降低,CEP的变化对脉冲及频谱的影响减弱.     

锯齿型石墨烯纳米窄带中量子霍尔体系的电场调控

应用含自洽格点在位库仑作用的Kane-Mele模型,研究锯齿型石墨烯纳米窄带平面内横向电场对边界带能带结构和量子自旋霍尔(QSH)体系的影响.研究结果显示,当电场强度较弱时,外加电场的方向可以调控自旋向下的两个边界带一起朝不同方向移动,导致波矢q=0.5处自旋向下的两个纯边界态的能量简并劈裂方向可由电场调控;当电场强度进一步增强到超过0.69 V/nm,自旋向下的两个边界带出现较大带隙,能带反转,而自旋向上的电子结构无能隙,系统呈现半金属性,同时QSH体系不再是B类.特别当电场强度为1.17 V/nm时,在自旋向下能带的能隙中,q=0.5处存在自旋向上的纯边界态,意味着在8格点边界处可以产生自旋向上的纯边界电流.当电场强度持续增加时,QSH系统从B类到C类经历3个阶段的变化.当电场强度超过1.42 V/nm后,自旋向上的两个边界带也出现能带反转,分别成为导带和价带,系统成为C类的普通量子霍尔体系.     

刻槽绝缘平行板对电子束的导向效应研究

采用不同材质的刻槽绝缘平行板,包括高纯度石英玻璃、聚四氟乙烯（Teflon）、酚醛树脂（电木）和聚甲醛板（赛钢板）,并在15 pA/mm2 ~14.3 nA/mm2范围内改变入射流强,利用1 500 eV电子束入射上述绝缘平行板,实验研究了上述平行板对电子束的导向行为。实验发现,上述电子束通过上述平行板时存在明显的导向现象,其导向行为与束流流强和绝缘材质无关。据此,可排除绝缘平行板内表面沉积电荷自组织充放电过程中,以绝缘材料的面电阻和体电阻对地泄放的线性形式放电过程。Adopting several grooved parallel plates made by different insulators, such as high-purity fused quartz, Teflon, Bakelite and POM (Polyformaldehyde), and further adjusting the electron beam current in a wide range (tens of pA~tens of nA), the discharging mechanism in the self-organizing charge and discharge processes of electron guiding was investigated and discussed by using 1 500 eV incident electron beam. The present results show that, the electron guiding behaviors are obviously existing when such electron beam is transmitted through the above grooved insulating parallel plates, which are independent on beam current and insulators. Our results suggest that, the possibilities of the accumulated charges on inner-surface of grooved parallel plates linearly discharging through surface and bulk resistances of plates into the ground should be excluded.     

Möbius transformation and a version of Schwarz lemma in octonionic analysis

The octonion is a generalization of complex to noncommutative and nonassociative space which has closed relation with exception geometries, wave equation, Yang‐Mills equations, black hole, string theory, and special relativity. In this paper, the Möbius transformation in this manner is first introduced, and some properties are discussed about the transformation in octonionic analysis. Some technique lemmas will be given to solve the problems caused by the weak form of associativity. These versions of Schwarz lemma and Schwarz‐Pick lemma are first studied in octonionic setting which will invoke integral representation formula for harmonic function and Möbius transformations. This will generalize the corresponding results which appear in the classical function theory to nonassociative space and may give new energy for the development of physics.     

傅里叶变换轮廓术中新的相位及高度算法分析

在传统傅里叶变换轮廓术三维面型测量中,为了准确得到被测物体的高度分布,必需保证投影仪出射光瞳和摄像机入射光瞳的连线与参考面平行并且在同一水平面,否则存在较大的误差。着眼于更普通的情况,讨论双瞳连线与参考面成某一夹角时的高度计算,推导出了非平行时的参考面光场及物面变形条纹光场的表达式,并给出了高度映射公式。因而,传统的傅里叶变换轮廓术测量成为角度α=0时的特例。该方法使傅里叶变换轮廓术的测量条件得到了放宽;易于通过移动投影装置或成像装置获取全场条纹;并为在难以实现双瞳与参考面平行的特殊环境下的测量提供了可行的方法。计算机模拟及实验均证实了该方法的有效性。