Fe掺杂CaCu3Ti4O12陶瓷的介电性能与弛豫特性研究

采用固相反应法制备了CaCu3Ti4-xFexO12(0≤x≤0.2)陶瓷,通过x射线衍射、扫描电子显微镜、介电频谱和阻抗谱等手段研究了Fe对CaCu3Ti4O12陶瓷的结构和介电性能的影响.研究发现:CaCu3Ti4-xFexO12陶瓷在x取值范围内形成了连续固溶体.随着Fe含量x的增加,晶粒半导性逐渐消失,介电常数减小.当x≤0.04时,在106-108和103-104 Hz频率范围存在介电弛豫行为I和介电弛豫行为Ⅱ,高频介电弛豫行为I与陶瓷内的晶界阻挡层有关,而低频介电弛豫行为Ⅱ与陶瓷表面层发生的界面极化有关.在CaCu3Ti3.99Fe0.01O12陶瓷的高温频谱中,观察到了第三个介电弛豫行为Ⅲ,它与局域电荷的跃迁有关,利用阿列纽斯关系式得到此过程的热激活能0.78 eV.     

Monte Carlo simulation of the dynamic evolution ofbinary lamellar eutectic in directional solidification

The dynamic evolution of the lamellar eutectic of binary alloys in directional solidification is studied in detail using the Monte Carlo technique. The simulated results can be summarized into two aspects: ({1}) the lamellar spacing λ is found to be inversely proportional to the chemical potential difference Δμ, predicting a linear relationship between the kinetic supercooling ΔT_k and total supercooling at the solid/liquid (S/L) interface; (2) as the solidifying velocity R is low, the dynamic product λ^{2}R shows a considerable dependence on temperature gradient G_T in the liquid in front of the S/L interface, although this dependence becomes much weaker at a high R.     

Low-frequency modulation of distortion product otoacoustic emissions in humans

Low-frequency modulation of distortion product otoacoustic emissions (DPOAEs) was measured from the human ears. In the frequency domain, increasing the bias tone level resulted in a suppression of the cubic difference tone (CDT) and an increase in the magnitudes of the modulation sidebands. Higher-frequency bias tones were more efficient in producing the suppression and modulation. Quasi-static modulation patterns were derived from measuring the CDT amplitude at the peaks and troughs of bias tones with various amplitudes. The asymmetric bell-shaped pattern resembled the absolute value of the third derivative of a nonlinear cochlear transducer function. Temporal modulation patterns were obtained from inverse FFT of the spectral contents around the DPOAE. The period modulation pattern, averaged over multiple bias tone cycles, showed two CDT peaks each correlated with the zero-crossings of the bias tone. The typical period modulation pattern varied and the two CDT peaks emerged with the reduction in bias tone level. The present study replicated the previous experimental results in gerbils. This noninvasive technique is capable of revealing the static position and dynamic motion of the cochlear partition. Moreover, the results of the present study suggest that this technique could potentially be applied in the differential diagnosis of cochlear pathologies.     

增量维纳滤波法在波前探测解卷积中的应用

一个常规的自适应光学系统通常包含三个重要环节：波前探测、波前校正和波前重构。因此对系统的技术要求非常高,造成系统复杂,成本昂贵。基于哈特曼-夏克波前探测的图像解卷积处理就是“事后”处理的一种,它省去了波前校正环节,使常规的自适应光学系统得到简化,降低了系统成本。其基本原理为对瞬时波面进行短时间曝光探测,同时记录相应的短时间曝光图像,来进行解卷积处理。将增量维纳滤波法应用于基于哈特曼-夏克波前探测的解卷积中,并对室内模拟点源情况下的三组畸变光斑图像数据进行了解卷积恢复处理。结果表明,将增量维纳滤波法应用于基于波前探测的解卷积是完全可行的,在室内模拟点源情况下,恢复的图像可以达到衍射极限分辨力。与维纳滤波相比,它扩展了噪声抑制因子的选取范围,在噪声抑制因子选取不正确的情况下,仍能得到比维纳滤波更好的结果。     

XAFS和XRD研究高能球磨对Fe70Cu30合金结构的影响

利用XRD和XAFS方法研究机械合金化Fe₇₀Cu₃₀二元金属合金随球磨时间的结构变化.XRD结果表明，球磨2 h后，部分金属Fe与Cu生成Fe-Cu合金；球磨20h后，金属Fe与Cu已完全合金化生成Fe-Cu合金，并只在2θ=44°处出现一个宽化的弱衍射峰，认为是在球磨20h后的Fe₇₀Cu₃₀合金中共存着fcc和bcc结构的Fe-Cu合金相.XAFS结果进一步表明，在球磨的初始阶段(2h)，fcc结构的Cu颗粒的晶 关键词： XAFS XRD 70Cu₃₀合金')" href="#">Fe₇₀Cu₃₀合金 机械合金化     

Combining clustering and classification for remote-sensing images using unlabeled data

A joint clustering and classification approach is proposed.This approach exploits unlabeled data for efficient clustering,which is applied in the classification with support vector machine(SVM) in the case of small-size training samples.The proposed method requires no prior information on data labels,and yields better cluster structures.Through cluster assumption and the notions of support vectors,the most confident k cluster centers and data points near the cluster boundaries are labeled and used to train a reliable SVM classifier.Our method gains better estimation of data distributions and mitigates the unrepresentative problem of small-size training samples.The data set collected from Landsat Thematic Mapper(Landsat TM-5) validates the effectiveness of the proposed approach.     

单胶子交换梯形近似下Bethe－Salpeter方程赝标解

将在动量空间具有积分形式的单胶子交换梯形近似下Ｂｅｔｈｅ－Ｓａｌｐｅｔｅｒ方程化为微分方程，求出该方程在四动量为零时的赝标解全部分量，其中第一分量为已知的Ｇｏｌｄｓｔｅｉｎ解．     

SEM-EDXA分析不同生长应力木材细胞壁微区木质素沉积

选取具不同生长应力水平的人工林尾巨桉(Eucalyptus uroph ylla×E.grandis)正常木为研究对象,借助场发射环境扫描电子显微镜系统,结合以溴元素做标记的X射线能谱分析技术,分析了尾巨桉细胞壁微区木质素沉积与生长应力的关系.研究结果表明,木纤维细胞壁各微区间木质素含量的大小关系与生长应力高低无关,其...     

采用单边大光腔结构改善电吸收调制器的光场分布

设计并制备了具有单边大光腔结构的半导体电吸收(electroabsorption，EA)调制器.模拟和测试的结果均表明：单边大光腔结构能有效地改善EA调制器的光场分布，使椭圆形的近场光斑变得圆形化，从而达到与圆形模式光纤之间的匹配，有利于提高耦合效率.     

傅里叶变换轮廓术中新的相位及高度算法分析

在传统傅里叶变换轮廓术三维面型测量中,为了准确得到被测物体的高度分布,必需保证投影仪出射光瞳和摄像机入射光瞳的连线与参考面平行并且在同一水平面,否则存在较大的误差。着眼于更普通的情况,讨论双瞳连线与参考面成某一夹角时的高度计算,推导出了非平行时的参考面光场及物面变形条纹光场的表达式,并给出了高度映射公式。因而,传统的傅里叶变换轮廓术测量成为角度α=0时的特例。该方法使傅里叶变换轮廓术的测量条件得到了放宽;易于通过移动投影装置或成像装置获取全场条纹;并为在难以实现双瞳与参考面平行的特殊环境下的测量提供了可行的方法。计算机模拟及实验均证实了该方法的有效性。