Adsorption recovery of thorium(IV) by Myrica rubra tannin and larch tannin immobilized onto collagen fibres

Novel adsorbents which can concentrate Th(IV) in aqueous solution were prepared by immobilizingMyrica rubra tannin and larch tannin onto collagen fibre matrices. The adsorption capacities of the immobilized tannins to Th(IV) are related to temperature and pH value of the adsorption process. For example, when the initial concentration of Th(IV) was 116.0 mg·l^-1 and the immobilized tannin was 100 mg, the adsorption capacities of immobilized Myrica rubra tannin and larch tannin were 55.98 mg Th(IV)·g^-1 and 13.19 mg Th(IV)·g^-1, respectively at 303 K, and 73.67 mg Th(IV)·g^-1 and 18.19 mg Th(IV)·g^-1 at 323 K. It was also found that the higher adsorption capacity was obtained at higher pH value. The adsorption equilibrium data of the immobilized tannins for Th(IV) can be well fitted by the Langmuir model and the mechanism of the adsorption was found to be a chemical adsorption. In general, the adsorption capacity of immobilized Myrica rubra tannin to Th(IV) is significantly higher than that of immobilized larch tannin, probably due to the fact that the B ring of Myrica rubra tannin has a pyrogallol structure which has higher reaction activity with metal ions. The breakthrough point of the adsorption column of immobilized Myrica rubra tannin was at 33 bed volumes for the experimental system. The mass transfer coefficient of adsorption column determined by Adams-Bohart equation was 1.61·10^-4 l·mg^-1.min^-1. The adsorption column can be easily regenerated by 0.1 mol·l^-1 HNO₃ solution, showing outstanding ability of concentrating Th(IV). This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel silver-containing supramolecular frameworks constructed by combination of coordination bonds and supramolecular interactions

The hydrothermal reactions of AgNO(3), 4,4'-bipy, and carboxylate ligands gave rise to three supramolecular architectures, namely [Ag(bipy)].H(2)SIPA.1/2bipy.H(2)O (1), [Ag(bipy)].1/2H(2)btec.H(2)O (2), and [Ag(bipy)](2).H(2)dpstc.2H(2)O (3) (H(3)SIPA = 5-sulfoisophthalic acid, bipy = 4,4'-bipyridine, H(4)btec = 1,2,4,5-benzenetetracarboxylic acid, H(4)dpstc = 3,3',4,4'-tetracarboxydiphenyl sulfone). All complexes are extended from Ag-bipy linear chains by the combination of coordination bonds and supramolecular interactions in two different approaches. Complexes 1 and 3 comprise two-dimensional frameworks. In the two complexes, a one-dimensional ladderlike structure is first formed by the connection of a Ag-bipy chain through hydrogen bonding between a free carboxylate/bipy ligand and weak coordinative interactions between a free carboxylate ligand and silver ion. The ladderlike structure is then extended to a two-dimensional layer architecture by pi...pi interactions between bipy ligands of the Ag-bipy chains. Complex 2 possesses a three-dimensional framework. The free H(2)btec(2)(-) ligands form a two-dimensional layer network by hydrogen-bonding interactions between protonated and deprotonated carboxylate groups; meanwhile, pi.pi interactions between bipy ligands of Ag-bipy chains also result in a two-dimensional layer. The two layers are further connected by weak Ag-O interactions to generate a three-dimensional supramolecular structure.     

A characterization ofL n (q) by the normalizers' orders of their sylow subgroups

LetG be a finite group. If for every primer, whereR ₁ Syl _r G andR ₂ Syl _r (L _n (q)), thenG L _n (q).     

相转移催化氧化合成苯甲酸

苯甲酸一般由甲苯氧化而成 ,工业上采用液相空气氧化生产苯甲酸[1 ] 。ＫＭｎＯ4氧化甲苯制备苯甲酸的方法是在实验室中最常见的一种方法[2 ] ,该法的优点是反应条件温和 ,操作简便 ;其缺点是反应时间长 ,产率低 (低于 40 % ) [3] 。为了提高ＫＭｎＯ4氧化法的产率 ,本文采用十六烷基三丁基溴化磷 (ＨＤＴＢＰ)和苄基三乙基氯化铵(ＢＴＥＡ)作相转移催化剂氧化甲苯制备苯甲酸 ,具有时间短 ,收率高等优点。同时又考虑到ＨＤＴＢＰ的催化效果虽然好 ,但价格昂贵 ,因此本文采用价廉易得的苄基三乙基氯化铵 (ＢＴＥＡ)作相转移催化剂氧化甲苯制…     

Eu(Ⅲ)、Tb(Ⅲ)、Ho(Ⅲ)、Tm(Ⅲ)和Lu(Ⅲ)与N,N′-二(邻羟基亚甲基)乙二胺配合物的研究

Dutt曾合成稀土离子与N,N′-二(邻羟基亚甲基)乙二胺的稀土双希夫碱配合物。但未见报道Eu(Ⅲ),Tb(Ⅲ),Ho(Ⅲ),Tm(Ⅲ),Lu(Ⅲ)与双希夫碱N,N′-二(邻羟基亚甲基)乙二胺的配合物。本工作合成了这5种双希夫碱配合物。 所用稀土氧化物纯度大于99.9%(上海跃龙化工厂)。水杨醛(CP,用前经减压蒸馏提纯)。稀土硝酸盐Ln(NO_3)_3·xH_2_由稀土氧化物与硝酸反应制得。其余试剂均为分析纯。 仪器为Perkin-Elmer 240-C元素分析仪;Nicolet-5DX型红外光谱仪,KBr压片;岛津UV-     

汞电极表面电荷的快速估算

本文报导了用交流示波极谱快速估算电极表面电荷的方法。该方法使用仪器简单,测量快速,操作简便,在吸附研究中很有用处。     

Regioselective hydrosilations. III. The synthesis and polymerization of ambifunctional silicon-containing epoxy monomers

Silicon-containing epoxide compounds bearing Si ? H groups can be readily prepared in high yields by the regioselective rhodium-catalyzed monohydrosilation of α,ω-dihydrogen functional siloxanes and silanes with vinyl epoxides. The remaining Si ? H groups in these compounds can be further selectively hydrosilated with unsaturated epoxides to give a series of unique ambifunctional monomers containing two different epoxide groups in the same molecule. The photopolymerization of these monomers has been studied using analytical techniques including real time infrared spectroscopy and differential scanning photocalorimetry. On photopolymerization, the new monomers yield interesting networks. © 1993 John Wiley & Sons, Inc.     

The key elements of traceability in chemical measurement: agreed or still under debate?

Talking about "traceability" means talking about a "property of the result of a measurement", about "the value of a standard", about "stated references" and about an "unbroken chain of comparisons". It describes by which comparison, and to which other value, the result of a measurement has been obtained, i.e. is "traceable to". It is about the underlying structure of the measurement process of the result of a measurement and therefore about the authority of the result. Since values carried by (certified) reference materials have also been obtained by measurement, the definition of traceability equally applies. Traceability in the context of reference materials is also about the authority of the values carried by the (certified) reference materials and is, therefore, of key importance for the authority of the reference materials themselves. Hence, values of results of measurements constitute part of the traceability chain and their uncertainties are an intrinsic accompanying phenomenon. Uncertainties need a traceability chain against which they can be evaluated, and a traceability chain is an a priori requirement for evaluating the uncertainty budget of a measurement result. An attempt has been made to exemplify "traceability" chains in some types of chemical measurement and to identify the degree of international agreement on the key elements of "traceability". It is concluded that there is less than universal agreement on this issue. The debate should continue in order to arrive at the international understanding and agreement needed, as "traceability" is now being incorporated in the International Organization for Standardization (ISO), the International Laboratory Accreditation Co-operation (ILAC) and in other "guiding" or regulatory documents. It is also the reason why the Institute for Reference Materials and Measurements (IRMM) has taken up the study of the concept in its core programme on Metrology in Chemistry, and why it sponsored the Workshop in Bratislava.