Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.     

O-Doped Nanographenes: A Pyrano/Pyrylium Route Towards Semiconducting Cationic Mixed-Valence Complexes

Herein we report an efficient synthesis to prepare O-doped nanographenes derived from the π-extension of pyrene. The derivatives are highly fluorescent and feature low oxidation potentials. Using electrooxidation, crystals of cationic mixed-valence (MV) complexes were grown in which the organic salts organize into face-to-face π-stacks, a favorable solid-state arrangement for organic electronics. Variable-temperature electron paramagnetic resonance (EPR) measurements and relaxation studies suggest a strong electron delocalization along the longitudinal axis of the columnar π-stacking architectures. Electric measurements of single crystals of the MV salts show a semiconducting behavior with a remarkably high conductivity at room temperature. These findings support the notion that π-extension of heteroatom-doped polycyclic aromatic hydrocarbons is an attractive approach to fabricate nanographenes with a broad spectrum of semiconducting properties and high charge mobilities.     

Cyclodimerization versus Polymerization of Methyl Methacrylate Induced by N‐Heterocyclic Carbenes: A Combined Experimental and Theoretical Study

The activation behavior of two N‐heterocyclic carbenes (NHCs), namely, 1,3‐bis(isopropyl)imidazol‐2‐ylidene(NHCiPr) and 1,3‐bis(tert‐butyl) imidazol‐2‐ylidene (NHCtBu), as organic nucleophiles in the reaction with methyl methacrylate (MMA) is described. NHCtBu allows the polymerization of MMA in DMF at room temperature and in toluene at 50 °C, whereas NHCiPr reacts with two molecules of MMA, forming an unprecedented imidazolium–enolate cyclodimer (NHCiPr/MMA=1:2). It is proposed that the reaction mechanism occurs by initial 1,4‐nucleophilic addition of NHCiPr to MMA, generating a zwitterionic enolate 2 , followed by addition of 2 to a second MMA molecule, forming a linear imidazolium–enolate 3 (NHCiPr/MMA=1:2). Proton transfer, generating intermediate 5 , followed by cyclization and release of methanol yielded the aforementioned zwitterionic cyclodimer 1:2 adduct 7 , the molecular structure of which has been established by NMR spectroscopy, X‐ray diffraction, and mass spectrometry. This unexpected difference between NHCtBu and NHCiPr in the reaction with MMA (polymerization and cyclodimerization, respectively) can be rationalized by using DFT calculations. In particular, the nature of the NHC strongly influences the cyclodimerization pathway, the cyclization of 5 and the release of methanol are the discriminating step and limiting step, respectively. In the case of NHCtBu, both steps are strongly disfavoured compared with that of NHCiPr (energetic difference of around 14 and 9 kcal mol^?1, respectively), preventing the cyclization mechanism from a kinetic viewpoint. Moreover, addition of a third molecule of MMA in the polymerization pathway results in a lower activation barrier than that of the limiting step in the cyclodimerization pathway (difference of around 14 kcal mol^?1), in agreement with the formation of polymethyl methacrylate (PMMA) by using NHCtBu as nucleophile.     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Synthesis of self‐healing supramolecular rubbers from fatty acid derivatives,diethylene triamine,and urea

We describe the synthesis of supramolecular self‐healing elastomers from vegetable oil fatty acid derivatives, diethylene triamine, and urea. Our strategy to obtain materials that are self‐healing but do not flow relies on the use of a wide molecular distribution of randomly branched oligomers equipped with self‐complementary and complementary hydrogen bonding groups. We prepared such oligomers with a two steps procedure. In the first step, diethylene triamine was condensed with dimer acids. In the second step, the oligomers obtained were allowed to react with urea. The molecules were characterized by NMR and IR spectroscopies and Monte‐Carlo simulations were used to analyze the molecular size distribution. The sensitivity to small variations of the experimental conditions has been examined and the robustness of the synthetic procedure optimized. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7925–7936, 2008     

Towards the total synthesis of Calyculin C: preparation of the C13-C25 spirocyclic core

A stereoselective synthesis of the C₁₃-C₂₅ of Calyculin C is described. Key steps involve the coupling of a terminal acetylene with a thiol ester and subsequent spirocyclisation using a double intramolecular hetero-Michael addition.     

Structure determination of slowly exchanging conformers in solution using high‐resolution NMR,computational modeling and DFT‐GIAO chemical shielding: application to an erythronolide A derivative

We discuss and demonstrate the potential of HSQC‐TOCSY and HSQC‐NOESY experiments to offer solutions for overlap problems in COSY and NOESY spectra, leading to improved signals that can be unambiguously assigned to individual carbons. Direct comparison of experimental ¹H and ¹³C chemical shielding with density functional theory (DFT)‐calculated values are uninformative; in contrast, the relative differences in experimental shielding between pairs of molecules correlates well with the relative differences in DFT‐GIAO shielding for the computed lowest energy conformers. A detailed application of both experimental and theoretical techniques is illustrated for slowly exchanging conformers of an erythronolide A derivative, which demonstrates that structure determination can strongly benefit from the interplay between experiment and theory. Copyright © 2009 John Wiley & Sons, Ltd.     

Reactivity of methacrylates in insertion polymerization

Polymerization of ethylene by complexes [{(P^O)PdMe(L)}] (P^O = κ(2)-(P,O)-2-(2-MeOC(6)H(4))(2)PC(6)H(4)SO(3))) affords homopolyethylene free of any methyl methacrylate (MMA)-derived units, even in the presence of substantial concentrations of MMA. In stoichiometric studies, reactive {(P^O)Pd(Me)L} fragments generated by halide abstraction from [({(P^O)Pd(Me)Cl}μ-Na)(2)] insert MMA in a 1,2- as well as 2,1-mode. The 1,2-insertion product forms a stable five-membered chelate by coordination of the carbonyl group. Thermodynamic parameters for MMA insertion are ΔH(++) = 69.0(3.1) kJ mol(-1) and ΔS(++) = -103(10) J mol(-1) K(-1) (total average for 1,2- and 2,1-insertion), in comparison to ΔH(++) = 48.5(3.0) kJ mol(-1) and ΔS(++) = -138(7) J mol(-1) K(-1) for methyl acrylate (MA) insertion. These data agree with an observed at least 10(2)-fold preference for MA incorporation vs MMA incorporation (not detected) under polymerization conditions. Copolymerization of ethylene with a bifunctional acrylate-methacrylate monomer yields linear polyethylenes with intact methacrylate substituents. Post-polymerization modification of the latter was exemplified by free-radical thiol addition and by cross-metathesis.     

Memory of chirality in cascade rearrangements of enediynes

The cascade rearrangement of chiral enediynes 1c-e, involving successively 1,3-proton shift, Saito-Myers cyclization, 1,5-hydrogen atom transfer, and intramolecular coupling of the resulting biradical, proceeded at 80 °C to form tri- and tetracyclic heterocycles possessing a quaternary stereogenic center with a very high level of memory of chirality.