Fragmentation of trimethoprim and other compounds containing alkoxy-phenyl groups in electrospray ionisation tandem mass spectrometry

This work describes electrospray ionisation tandem mass spectrometry studies of trimethoprim and a series of structurally similar compounds containing alkoxy-phenyl groups; using accurate mass measurement to confirm the proposed fragmentations. Radical cations were observed in the spectra obtained for some of the compounds, as well as uncommon fragmentations showing losses of CH4 and C2H6, whereas other compounds showed the formation of even electron ions. Possible structures for the fragment ions have been proposed and explanations for the different types of fragmentations based on the structures of the compounds. In addition an alternate structure for a fragment ion previously reported for tandem mass spectrometry of trimethoprim has been proposed, based on accurate mass measurement.     

Palladium-catalyzed synthesis of substituted cyclopentadienes and indenes from allylic esters

Various mono- and di-substituted cyclopentadienes have been prepared by palladium-catalyzed alkylation of allylic esters with cyclopentadienide and t-butyl-cyclopentadienide anions. The same procedure has been applied to the preparation of substituted indenes.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Mise en évidence d'un désordre statistique dans les structures chalcogénoiodures d'étain et d'antimoine

The crystal structures of Sn₂SbX₂I₃, with X = S or Se, and Sn₃SbSe₂I₅ are characterized by a statistical disorder of part of the [Sb] and [Sb, Sn] sites. All these crystal structures are built up from infinite ribbons (Sn₂X₄)_n of SnX₅ pyramids where X = ((S, Se) and I). The ribbons are weakly linked through Sn … I interactions to give infinite sheets. Between sheets are located [Sb] or [Sb, Sn] atoms in twinned sites.     

Field desorption mass spectrometry of oligosaccharides in the presence of metallic salts

In the field desorption mass spectrometry of oligosaccharides, traces of contaminating salts in polar solvents decrease the detection sensitivity, and in some cases no ion could be detected in the molecular range. The present work shows that the addition of alkaline salts (NaI or KI) greatly increases the sensitivity, and cationized molecular ions are obtained. The influence of the molar ratio sugar/salt on the nature and relative intensity of the desorbed species has been studied on mixtures of α-D -trehalose and NaI. At the low salt ratio (100:1), high molecular weight clusters [X M + Na]⁺ are preferentially formed. At the high salt ratio (1:10), mixed clusters [M + NaI + Na]⁺, doubly charged ions [M + 2Na]²⁺ and monomeric cationized ions [M + Na]⁺ are observed along with salt clusters [NaI + Na]⁺ and [2NaI + Na]⁺. In the range of molar ratios sugar/salt of 10:1 to 1:1, the field desorption mass spectra exhibit a cationized ion [M + Na]⁺, which contributes more than 80% of Σ₁₀₀. This cationization technique has been applied to the field desorption mass spectrometry of several oligosaccharides. In all cases, the salt effect causes the replacement of the [M + H]⁺ ion by a [M + C]⁺ ion. (Note: the term [M + C]⁺ and similar ones mean an association between the whole molecule studied (M) and an alkaline cation [C]⁺ ([K)]⁺, [Na]⁺, [Li]⁺).) Thus, di, tri- and tetrasaccharides exhibit intense [M + Na]⁺ ions in the presence of NaI and only a few fragment peaks are observed in their field desorption mass spectra. This technique has been applied successfully to the detection of the hexasaccharide ajugose in a natural sample of pentasaccharide, and has also allowed the unambiguous determination of the composition of a mixture of partially methylated trehaloses. The salt effects are dicussed in terms of selective adsorption on the emitter, pre-existing soluble complexes sugar-salt, interactions between these species in the electric field and dissociative desorption of ionic complexes.     

From calcium interaction to calcium electrochemical detection by [(C5H5)Fe(C5H4COCH=CHC6H4NEt2)] and its two novel structurally characterized derivatives

[(C(5)H(5))Fe(C(5)H(4)COCH=CHC(6)H(4)NEt(2))] (1) has been electrochemically evaluated toward different cations in solution. Calcium sensing by this compound and its two new derivatives [(C(5)H(5))Fe(C(5)H(4)CO(CH=CH)(2)C(6)H(4)NMe(2))] (2) and [(C(5)H(5))Fe(C(5)H(4)CH=CHCOCH=CHC(6)H(4)NEt(2))] (3) that exhibit a conjugated link between the ferrocene unit and the nitrogen atom has been thoroughly examined. Compounds 2 and 3 have been structurally characterized by single-crystal X-ray diffraction studies. The three related protonated species [1H][BF(4)] (4), [2H][BF(4)] (5), and [3H][BF(4)] (6) have been isolated in a good yield. NMR experiments clearly established that calcium interaction occurs in the vicinity of the carbonyl group, and mass spectrometry studies confirmed that this interaction, which involves several ligand-Ca(2+) adducts, is complex. A combination of electrochemical and NMR experiments highlighted an original salt influence on the electrochemical calcium sensing result.     

Comprehensive photokinetic and NMR study of a biphotochromic supermolecule involving two naphthopyrans linked to a central thiophene unit through acetylenic bonds

A photophysical and photochemical study of a biphotochromic compound where two naphthopyran units are linked by an acetylene-thiophene-acetylene bridge has been carried out in toluene. Both fluorescence and intersystem crossing to the triplet manifold were found to compete with the photocoloration process. Two photoproducts (transoid-trans and transoid-cis stereoisomers), absorbing at approximately 480 nm and corresponding to the opening of a single photochromic unit, were detected by spectrophotometric analysis after short irradiation time in diluted solution and identified by 1H-nuclear magnetic resonance (NMR) spectroscopy. After prolonged irradiation at 228 K of highly concentrated solutions (up to 3 x 10(-3) mol dm(-3)), two additional isomers, absorbing at approximately 550 nm, were formed. Their NMR spectra indicate the opening of both photochromic units. An interesting effect of selective vibronic excitation was found, showing that the photoreaction is favored at excited vibronic levels to the detriment of the radiative relaxation.     

Pyrolysis of poly-α-acetoxystyrene,a polymer derived from polystyrene and poly(vinyl acetate)

The pyrolysis of poly-α-acetoxystyrene was investigated by using two methods thermogravimetry, and a reactor working under dynamic conditions coupled with a chromatograph.Thermogravimetry was used firstly with a constant heating rate and secondly under isothermal conditions. Two different degradation steps for the polymer were found, the first between 140 and 200°C and the second above 220°C. The kinetics of the overall pyrolysis were studied for the first thermal degradation step. The degradation order is zero when the weight loss is less than 10%, and unity when the weight loss is between 10 and 32%. The activation energy is about 40 kcal/mole for either order. The results obtained by using dynamic and isothermal thermogravimetry are in good agreement.Volatile products were identified and analysed by using a reactor working under dynamic conditions coupled with a chromatograph. The decomposition is similar to that of poly(vinyl acetate) and different to that of known substituted polystyrenes. Acetic acid was the main component of the volatile products (90–95%), the others being the monomer and acetophenone.     

Study of polymer treatment with tetrafluoromethane plasma: Reactivity of fluorinated species on model surfaces

Polyolefins and their model molecules, some n-alcanes, have been modified by a tetrafluoromethane microwave plasma. The chosen molecules are high-density polyethylene (HDPE) and hexatriacontane (HTC), low-density polyethylene (LDPE) and paraffin, and polycaprolactone (PCL) and octadecyl octadecanoate (ODO). It has been found, except for paraffin, that the model surfaces have the same behavior as the corresponding polymers. Plasma modification is described as the sum of two mechanisms: degradation and fluorination. These reactions seem to be competitive and parallel. Degradation and fluorination rates are dependent on treatment time and are practically independent on substrate position. A domain of fluorination exists near the edge of plasma, whatever the substrate in or outside plasma. © 1993 John Wiley & Sons, Inc.     

Metabolite profiling in rat urine by liquid chromatography/electrospray ion trap mass spectrometry. Application to the study of heavy metal toxicity

This work reports the use of reverse-phase liquid chromatography coupled to electrospray ion trap (QIT) mass spectrometry for the analysis of the metabolome in rat urine. An injection of 20 microL of urine into the chromatographic system is followed by a slow gradient elution and mass spectrometric detection in the scanning mode from m/z 100-1000 in both positive and negative modes. Over a time scale of 90 min, 30 and 20 resolved peaks were observed in the positive and the negative modes, respectively, corresponding to the presence of a few hundred m/z ratios. By using a QIT analyzer, data-dependent tandem mass spectrometry of selected m/z ratios identified several compounds in rat urine and characterized various chemical families, including carboxylic acids, amines, sulfated compounds, glucuronides and glycosides, by the observation of characteristic fragment ions or neutral losses. The method has been applied to the investigation of the chronic toxicity of heavy metals in rat urine. A few tens of m/z ratios, differing in intensity more than threefold from control values, were observed in both positive and negative modes. The time variations for some selected ions suggest that LC/ESI-MS could allow selective characterization of biomarkers in response to specific toxic compounds.