Effects of starch types on the properties of baked starch foams

In order to determine how the physicochemical properties of starch foams depend on the type of the starch used in baking process, starch foams were prepared using native starch and selected starch derivatives. The morphology, the density, the water adsorption capacity, the impact strength, and the thermal properties were determined for foams made from native starch, pregelatinized starch, hydroxypropylated starch with different degrees of substitution (DS = 0.015–0.025 and DS = 0.1), low distarch phosphate, medium distarch phosphate, and two cationic starch types (DS = 0.027–0.029 and DS = 0.029–0.033). The modified starch foams exhibited a more expanded structure with thinner cell walls than the foam made from native starch. The density of the native starch was 0.21 g cm^?3 , while the density of the modified starch foams was lower, in the range of 0.14–0.17 g cm^?3 except for the starch foam made from medium distarch phosphate. The thermal and physicochemical properties of the foams made from the other starch derivatives were dependent on the functional groups and the degree of cross-linking. The foam made from medium distarch phosphate had a significantly higher density and impact strength that was accompanied by a somewhat lower water adsorptivity.     

Coupled cluster calculations of the ground state potential and interaction induced electric properties of the mixed dimers of helium,neon and argon

Using augmented polarized correlation consistent basis sets extended with midbond functions, we evaluate the ground state interaction potential and the induced electric dipole polarizabilities and first and second hyperpolarizabilities of the He–Ar, Ne–Ar and He–Ne van der Waals complexes. For the calculation of the potential we resort to the coupled cluster singles and doubles (CCSD) model corrected for triple excitations, CCSD(T), whereas properties are evaluated with CCSD response theory. As a check of the quality of the potential, the rovibrational spectrum and the gas second virial coefficients are evaluated. The rovibrational spectra improve previously available theoretical results, although the dissociation energies are probably still slightly underestimated. For the gas second virial coefficients the agreement with experiment is satisfactory. The frequency dependence of the interaction (hyper)polarizabilities is analysed and a comparison with previous results on the mixed dimers and the pure gases is made.     

Crystal structure,thermal behavior,and microbiological activity of a thiosemicarbazide-type ligand and its cobalt complexes

The synthesis of a potentially bioactive mixed-valence Co^III/Co^II complex with 2-acetylpyridine S-methylisothiosemicarbazone (HL) ligand is described. The crystal and molecular structure of the formed [Co^IIIL₂][Co^IICl₃ py]·Me₂CO (I) compound (py stands for pyridine) is determined by single-crystal X-ray crystallography. It’s thermal decomposition along with the decomposition of the ligand and six structurally related complexes with formulas [CoL₂]NO₃·MeOH (1), [CoL₂]Br·MeOH (2), [CoL₂]HSO₄·MeOH (3), [CoL₂]₂[Co^II(NCS)₄] (4), [Co(HL)(L)]I₂·2MeOH (5), and [Co(HL)(L)][Co^IICl₄]·MeOH (6) was determined by simultaneous TG/DSC measurements. The decomposition pattern is evaluated using TG/DTA-MS data. The results were related to the solvent/moisture content and the decomposition mechanism of the compounds. The antimicrobial activity of the ligand and of all the complexes was tested in vitro for selected gram-negative and gram-positive bacteria and fungi. The activity of the ligand against all tested bacteria is comparable with those obtained for standard antibiotics, while it is less active against fungi. Surprisingly, the activity of the complexes is very low. The low antimicrobial activity of the complexes may be in connection with their high thermodynamic and kinetic inertness in solution. The results are also supported by the relatively high thermal stability of the complexes.     

Theoretical study of some nitriles: Intramolecular hydrogen bonds and anomeric effect

An ab initio study of 3-chloro-, 3-hydroxy-, 3-mercapto-, and 3-amino-propanenitrile and 4-chloro-bu- tanenitrile was carried out at several levels of theory. The calculated stabilities and geometrical trends are interpreted in terms of the effects of intramolecular hydrogen bonds and anomeric interactions, and compared with available experimental data.     

Rare earth arenedisulfonate metal-organic frameworks: an approach toward polyhedral diversity and variety of functional compounds

Eight 2D and 3D metal-organic framework (MOF) rare earth naphthalenedisulfonates have been obtained. The different geometry of the naphthalenedisulfonic acids used as connectors [(1,5-NDS) and (2,6-NDS)] gives rise to the three new structure types. In Ln(OH)(1,5-NDS)H2O, LnPF-1 (lanthanide polymeric framework; Ln=La, Nd, Pr, Sm and Eu), the lanthanide ion is octacoordinated. Its 3D structure is formed by (Ln2O14)-S-(Ln2O14) infinite chains, connected through complete NDS connectors. LnPF-2 (Ln=Nd), with the same empirical formula as the former, and the lanthanide in octa- and nonacoordination, owns an arrangement of sulfonate bridges and neodymium polyhedra that gives rise to a 2D structure. [Ln5(2,6-NDS)3(OH)9(H2O)4](H2O)2, LnPF-3 (Ln=Nd, Eu), demonstrates that it is possible to obtain a 3D structure with (2,6-NDS), when a greater Ln/connector ratio is employed. It is worth pointing out the existence, in this latter family of compounds, of a mu5-OH group, whose hydrogen atom is very close to one-sixth Ln atom (distance Ln...H=2.09 A). The materials, with high thermal stability, act as active and selective bifunctional heterogeneous catalysts in oxidation of linalool yielding cyclic hydroxy ethers. The absence of any 3D Nd-Nd magnetic interaction is explained due to the inner nature of 4f orbitals of Nd3+, which do not favor the magnetic exchange. The influence of the polymeric frame matrix results in a better photoluminescence efficiency for NdPF-1.     

Primary photoreactions of the 3',5'-dimethoxybenzoin cage and determination of the release rate in polar media

3',5'-dimethoxybenzoin (DMB) is an important photoremovable protecting group. The primary photoreactions of DMB acetate and fluoride following photoexcitation by a subpicosecond laser flash were investigated by pump-probe spectroscopy. The primary photoproduct is identified as a preoxetane biradical intermediate that decays by different pathways depending on solvent polarity. In polar solvents (acetonitrile, water), the biradical decays by releasing acetate or fluoride with a lifetime of about 2 ns. Thus, DMB is an excellent protecting group for the investigation of fast processes such as protein folding.     

The fluorobenzene-argon S(1) excited-state intermolecular potential energy surface

We evaluate the first excited-state (S1) intermolecular potential energy surface for the fluorobenzene-Ar van der Waals complex using the coupled cluster method and the augmented correlation-consistent polarized valence double-zeta basis set extended with a set of 3s3p2d1f1g midbond functions. To calculate the S(1) interaction energies, we use ground-state interaction energies evaluated with the same basis set and the coupled cluster singles and doubles (CCSD) including connected triple excitations [CCSD(T)] model and interaction and excitation energies evaluated at the CCSD level. The surface minima are characterized by the Ar atom located above and below the fluorobenzene ring at a distance of 3.5060 A with respect to the fluorobenzene center of mass and at an angle of 5.89 degrees with respect to the axis perpendicular to the fluorobenzene plane. The corresponding interaction energy is -425.226 cm(-1). The surface is used in the evaluation of the intermolecular level structure of the complex, and the results are compared to the experimental data available and to those found in previous theoretical papers on ground-state potentials for similar complexes.     

Metal-Free C−H Borylation of N-Heteroarenes by Boron Trifluoride

Organoboron compounds are essential reagents in modern C−C coupling reactions. Their synthesis via catalytic C−H borylation by main group elements is emerging as a powerful tool alternative to transition metal based catalysis. Herein, a straightforward metal-free synthesis of aryldifluoroboranes from BF₃ and heteroarenes is reported. The reaction is assisted by sterically hindered amines and catalytic amounts of thioureas. According to computational studies the reaction proceeds via frustrated Lewis pair (FLP) mechanism. The obtained aryldifluoroboranes are further stabilized against destructive protodeborylation by converting them to the corresponding air stable tetramethylammonium organotrifluoroborates.     

Importance of electron correlation effects and basis set superposition error in calculations of interaction energies and interaction-induced electric properties in hydrogen-bonded complexes: a model study

A detailed study of the interaction energies and interaction-induced electric dipole properties in model linear hydrogen cyanide complexes (HCN) _m (m?=?2?C4) is carried out within the finite field HF SCF, MP2, CCSD and CCSD(T) approximations using the recently developed LPol-n (n?=?ds, fs, dl, fl) basis sets. The importance of high-order correlation effects and the basis set superposition error is evaluated. To correct for the latter is crucial for obtaining accurate interaction energy values, but the error can safely be neglected in the estimation of induced electric properties when the LPol-n (n?=?ds, fs, dl, fl) basis sets are used. Correlation effects are important in the evaluation of both the interaction energies and the induced electric properties of the systems.