Destructive adsorption of CCl4 over lanthanum-based solids: linking activity to acid-base properties

The relative activities of a low-surface crystalline and high-surface amorphous LaOCl, further denoted as S1 and S2, have been compared for the destructive adsorption of CCl4. It was found that the intrinsic activity of S2 is higher than that of S1. Both samples were characterized with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2-physisorption, and Raman and infrared (IR) spectroscopy. IR was used in combination with CO2, CO, and methanol as probe molecules. The CO2 experiments showed that different carbonate species are formed on both materials. For S1, a high surface concentration of bidentate carbonate species and a lower concentration of monodentate carbonate were observed. In the case of S2, bulk carbonates were present together with bridged carbonates. CO adsorption shows that S2 and S1 have very similar Lewis acid sites. However, methanol adsorption experiments showed that S2 had a higher number of stronger Lewis acid sites than S1 and that twofold coordinated methoxy species were more strongly bound than threefold coordinated methoxy species. Because of the analogy between methanol dissociation and the removal of the first chlorine atom in the destructive adsorption of CCl4, the sites enabling twofold coordination were likely to be the same Lewis acid sites actively involved in the destructive adsorption of CCl4. La2O3 was less active than the two LaOCl materials, and therefore, the intrinsic activity of the catalyst increases as the strength of the Lewis acid sites increases. S2 contains more chlorine at the surface than S1, which is expressed by the higher number of sites enabling twofold coordination. Moreover, this explains the difference in destructive adsorption capacity for CCl4 that was observed for the samples S1 and S2. Since LaCl3, being the most acidic phase, is not active for the destructive adsorption of CCl4, basic oxygen atoms, however, remain needed to stabilize the reaction intermediate CCl3 as La-O-CCl3.     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.     

Relative activity of La2O3, LaOCl, and LaCl3 in reaction with CCl4 studied with infrared spectroscopy and density functional theory calculations

Relative activity of La2O3, LaOCl, and LaCl3 in the destructive adsorption of CCl4 to CO2 was studied with density-functional theory calculations and temperature-programmed reaction experiments monitored with IR spectroscopy. Integral absorbance of the IR peak for phosgene, which is a reaction intermediate, was obtained as a function of temperature, and initial reaction temperatures were compared for different sample amounts of La2O3 and LaOCl. The initial reaction temperatures of about 390 K for La2O3 and 365 K for LaOCl were practically independent of the tested sample weights, and the lower temperature for LaOCl was attributed to a higher activity of surface sites on this material. Calculations suggest that CCl4 decomposition proceeds through a stepwise Cl donation from CCl4 to the surface and that the overall rate is controlled by the first step: CCl4 splitting into a Cl anion and CCl3 cation over an acid-base pair of surface sites. A lanthanum acid site in the pair initiates the split by interacting with one of the chlorine atoms in CCl4, and an oxygen base site stabilizes the remaining CCl3 fragment. Transition state estimates suggest that the relative activity of surface sites can be ranked in the following order: LaOCl > LaCl3 with a partially dechlorinated surface > La2O3. Surface Lewis acidity and basicity of these materials are summarized in terms of the vibrational frequency for adsorbed CO, energy of the lowest unoccupied molecular orbital, and proton affinity. Higher activity of LaOCl is attributed to the higher acidity of the lanthanum site, the higher basicity of the oxygen site, and the geometry of the acid-base pair of sites that allows them to interact with CCl4 simultaneously.     

Ruthenium(II) dendrimers containing carbazole-based chromophores as branches

Three new luminescent and redox-active Ru(II) complexes containing novel dendritic polypyridine ligands have been synthesized, and their absorption spectra, luminescence properties (both at room temperature in fluid solution and at 77 K in rigid matrix), and redox behavior have been investigated. The dendritic ligands are made of 1,10-phenanthroline coordinating subunits and of carbazole groups as branching sites. The first and second generation species of this novel class of dendritic ligands (L1 and L2, respectively; see Figure 1 for their structural formulas) have been prepared and employed. The metal dendrimers investigated are [Ru(bpy)(2)(L1)](2+) (1; bpy = 2,2'-bipyridine), [Ru(bpy)(2)(L2)](2+) (2), and [Ru(L1)(3)](2+) (3; see Figure 2). For the sake of completeness and comparison purposes, also the absorption spectra, redox behavior, and luminescence properties of L1 and L2 have been studied, together with the properties of 3,6-di(tert-butyl)carbazole (L0) and [Ru(bpy)(2)(phen)](2+) (4, phen = 1,10-phenanthroline). The absorption spectra of the free dendritic ligands show features which can be assigned to the various subunits (i.e., carbazole and phenanthroline groups) and additional bands at lower energies (at lambda > 300 nm) which are assigned to carbazole-to-phenanthroline charge-transfer (CT) transitions. These latter bands are significantly red-shifted upon acid and/or zinc acetate addition. Both L1 and L2 exhibit relatively intense luminescence at room temperature in fluid solution (lifetimes in the nanosecond time scale, quantum yields of the order of 10(-2)-10(-1)) and at 77 K in rigid matrix (lifetimes in the millisecond time scale). Such a luminescence is assigned to CT states at room temperature and to phenanthroline-centered pi-pi triplet levels at 77 K. The room-temperature luminescence of L1 and L2 is totally quenched by acid or zinc acetate. The metal dendrimers exhibit the typical absorption and luminescence properties of Ru(II) polypyridine complexes. In particular, metal-to-ligand charge-transfer (MLCT) bands dominate the visible absorption spectra, and formally triplet MLCT levels govern the excited-state properties. Excitation spectroscopy evidences that all the light absorbed by the dendritic branches is transferred with unitary efficiency to the luminescent MLCT states in 1-3, showing that the new metal dendrimers can be regarded as efficient light-harvesting antenna systems. All the free ligands and metal dendrimers exhibit a rich redox behavior (except L2 and 3, whose redox behavior was not investigated because of solubility reasons), with clearly attributable reversible carbazole- and metal-centered oxidation and polypyridine-centered reduction processes. The electronic interaction between the carbazole redox-active sites of the dendritic ligands is affected by Ru(II) coordination.     

Hydrogen bonding in macrocyclic receptor systems

Abstract

The interactions of macrocyclic polyethers with alkali and alkaline earth cations have been well studied and much about their chemistry is now well understood. Less well examined or comprehended are hydrogen bond interactions. A combination of ion selective electrode binding constant determination techniques and fast atom bombardment mass spectrometry are brought to bear on this problem. It is found that all-oxygen crown ethers and their derivatives exhibit quite different complexation behaviour with ammonium salts than do their various azacrown counterparts.     

Multiple cation binding by bola-amphiphilic crown ethers: Assessment by fast atom bombardment mass spectrometry

Abstract

Bola-amphiphiles having two aza-18-crown-6 ether rings attached by a covalent spacer (O—O) and an analogous tris (macrocycle) (O—O—O) have been prepared and their cation complexation behavior has been assessed by fast atom bombardment and collisionally activated dissociation tandem mass spectrometry; the key finding is that two cations may simultaneously be complexed by a two- or three-crown system and that this complexation may also involve an anion.     

A versatile A2 + B3 approach to hyperbranched polyacenaphthenequinones

A series of hyperbranched polyacenaphthenequinones has been prepared by superelectrophilic aromatic substitution of (substituted) acenaphthenequinone and 1,3,5‐tris‐(4‐phenoxybenzoyl)benzene via a facile A₂ + B₃ approach. Because of the strongly increased reactivity of the second A functionality, gelation was efficiently avoided during the polymerization. The structure of the resulting polymer was characterized by NMR spectroscopy and gel permeation chromatography. Further modification of the hyperbranched polyacenaphthenequinone was explored both on the acenaphthenequinone and aromatic moieties. Moreover, the polymer modified through sulfonation was investigated as a water‐soluble acid catalyst for the degradation of biomass resources. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2596‐2603     

Oxidative Addition of Haloheteroarenes to Palladium(0): Concerted versus SNAr‐Type Mechanism

The kinetics of the oxidative additions of haloheteroarenes HetX (X=I, Br, Cl) to [Pd⁰(PPh₃)₂] (generated from [Pd⁰(PPh₃)₄]) have been investigated in THF and DMF and the rate constants have been determined. In contrast to the generally accepted concerted mechanism, Hammett plots obtained for substituted 2‐halopyridines and solvent effects reveal a reaction mechanism dependent on the halide X of HetX: an unprecedented S_NAr‐type mechanism for X=Br or Cl and a classical concerted mechanism for X=I. These results are supported by DFT studies.