Analysis of bonding properties in molecular ground and excited states by a Cohen-type bond order

We propose a Cohen-type bond order analysis in terms of orthogonalized atomic basis functions which can be used to analyze NDO wave functions of large organic and metal–organic molecules. It is shown that for small molecules the results gained with this method are in excellent agreement with the same analysis based on ab initio STO -3G wavefunctions. For large planar aromatic systems these all-valence electron bond orders are found to be a consistent generalization of the π-bond order. A simple relation between these bond orders and the corresponding covalent bond energies is established. The method can be easily extended to study excited state multiconfiguration wave functions. We present calculations for C₂H₂, C₂H₄, C₂H₆, and Mn₂(CO)₁₀. The results indicate that the method can be used to discuss the photochemistry of organic and metal–organic compounds.     

Efforts to expand the genetic alphabet: identification of a replicable unnatural DNA self-pair

Six unnatural nucleotides featuring fluorine-substituted phenyl nucleobase analogues have been synthesized, incorporated into DNA, and characterized in terms of the structure and replication properties of the self-pairs they form. Each unnatural self-pair is accommodated in B-form DNA without detectable structural perturbation, and all are thermally stable and selective to roughly the same degree. Furthermore, the efficiency of polymerase-mediated mispair synthesis is similar for each unnatural nucleotide in the template. In contrast, the efficiency of polymerase-mediated self-pair extension is highly dependent on the specific fluorine substitution pattern. The most promising unnatural base pair candidate of this series is the 3-fluorobenzene self-pair, which is replicated with reasonable efficiency and selectivity.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

Capillary array scanner for time-resolved detection and identification of fluorescently labelled DNA fragments

The first capillary array scanner for time-resolved fluorescence detection in parallel capillary electrophoresis based on semiconductor technology is described. The system consists essentially of a confocal fluorescence microscope and a x,y-microscope scanning stage. Fluorescence of the labelled probe molecules was excited using a short-pulse diode laser emitting at 640 nm with a repetition rate of 50 MHz. Using a single filter system the fluorescence decays of different labels were detected by an avalanche photodiode in combination with a PC plug-in card for time-correlated single-photon counting (TCSPC). The time-resolved fluorescence signals were analyzed and identified by a maximum likelihood estimator (MLE). The x,y-microscope scanning stage allows for discontinuous, bidirectional scanning of up to 16 capillaries in an array, resulting in longer fluorescence collection times per capillary compared to scanners working in a continuous mode. Synchronization of the alignment and measurement process were developed to allow for data acquisition without overhead. Detection limits in the subzeptomol range for different dye molecules separated in parallel capillaries have been achieved. In addition, we report on parallel time-resolved detection and separation of more than 400 bases of single base extension DNA fragments in capillary array electrophoresis. Using only semiconductor technology the presented technique represents a low-cost alternative for high throughput DNA sequencing in parallel capillaries.     

Direct structure determination using residual dipolar couplings: reaction-site conformation of methionine sulfoxide reductase in solution

Residual dipolar couplings (RDC) from partially aligned molecules provide long-range structural data and are thus particularly well adapted to rapid structure validation or protein fold recognition. Extensive measurements in two alignment media can also provide precise de novo structure from RDC alone. We have applied a novel combination of these approaches to the study of methionine sulfoxide reductase (MsrA) from Erwinia chrysanthemi, a 27 kDa enzyme essential for repairing oxidative stress damage. The tertiary fold was initially validated by comparing backbone RDC to expected values from the crystal structure of the homologous MsrA from Escherichia coli. Good agreement was found throughout the chain, verifying the overall topology of the molecule, with the exception of the catalytically important peptide P196-L202, where strong and systematic RDC violation was observed. No evidence for local differential mobility in this region was detected, implying that the structure of the strand differs in the two molecules. We have therefore applied the de novo approach meccano to determine the conformation of this peptide using only RDC. A single conformation is found that is in agreement with all measured data. The aligned peptide can be docked onto the expected covalence of the rest of the template molecule while respecting its strictly defined relative orientation. In contrast to the structure of MsrA from E. coli, the reactive side chain of Cys200 is oriented toward the interior of the molecule and therefore closer to the catalytic Cys53, obviating the need for previously proposed conformational reorganization prior to formation of this disulfide intermediate. This analysis requires only backbone assignment and uses unambiguously assigned and readily measurable structural data, thereby greatly economizing investigation time compared to established nuclear Overhauser effect- (nOe-) based structure calculation methods.     

Self-assembly of tetrahedral and trigonal antiprismatic clusters [Fe4(L4)4] and [Fe6(L5)6] on the basis of trigonal tris-bidentate chelators

In a one-pot reaction, the tetranuclear iron chelate complex [Fe4(L4)4] 6 was generated from benzene-1,3,5-tricarboxylic acid trichloride (4), bis-tert-butyl malonate (5a), methyllithium, and iron(II) dichloride under aerobic conditions. Alternatively, hexanuclear iron chelate complex [Fe(L5)6] 7 was formed starting from bis-para-tolyl malonate (5b) by employing identical reaction conditions to those applied for the synthesis of 6. The clusters 6 and 7 are present as racemic mixtures of homoconfigurational (delta,delta,delta,delta)/(lambda,lambda,lambda,lambda)-fac or (delta,delta,delta,delta,delta,delta)/(lambda,lambda,lambda,lambda,lambda,lambda)-fac stereoisomers. The structures of 6 and 7 were unequivocally resolved by single-crystal X-ray analyses. The all-iron(III) character of 6 and 7 was determined by M?ssbauer spectroscopy.     

Die metrisierbaren linearen Teilräume des Raumes\mathfrak{O}_M von L. Schwartz

In Schwartz' terminology, a real or complex valued functionf, defined and infinitely differentiable on ? _n , belongs to \(\mathfrak{O}_M \) iff, as well as any of its derivatives, is at most of polynomial growth. The topology of \(\mathfrak{O}_M \) is defined by the seminorms sup{∣?(x)D ^p f(x)∣;x∈? ⁿ }, where ? belongs to \(\mathfrak{S}\) andD ^p is any derivative. It is well-known that \(\mathfrak{O}_M \) is non-metrisable. For any μ: ? ⁿ →?, let \(\mathfrak{B}_\mu \) be the space of all infinitely differentiable functionsf satisfying, for eachp, sup{∣(1+∣x∣²)^?μ(p) D ^p f(x)∣;x∈? ⁿ }<∞, with the obvious topology. These spaces, which are of very little use elsewhere in the theory of distributions, can be conveniently applied to characterise the metrisable linear subspaces of \(\mathfrak{O}_M \) : A linear subspace of \(\mathfrak{O}_M \) is metrisable if and only if it is, algebraically and topologically, a subspace of some \(\mathfrak{B}_\mu \) .     

Wafer thickness optimization for silicon solar cells of heterogeneous material quality

In this Letter, we introduce a method of calculating the optimal wafer thickness for silicon solar cells with multicrystalline bulk material. The optimal thickness depends on the relation of bulk recombination to surface recombination and the light trapping. For multicrystalline silicon bulk recombination strongly varies laterally and with injection level, which complicates the calculations. A thickness optimization using the “Efficiency Limiting Bulk Recombination Analysis” (ELBA) takes all these effects correctly into account. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)