Structure and ultrafast dynamics of liquid water: a quantum mechanics/molecular mechanics molecular dynamics simulations study

A quantum mechanics/molecular mechanics molecular dynamics simulation was performed for liquid water to investigate structural and dynamical properties of this peculiar liquid. The most important region containing a central reference molecule and all nearest surrounding molecules (first coordination shell) was treated by Hartree-Fock (HF), post-Hartree-Fock [second-order Moller-Plesset perturbation theory (MP2)], and hybrid density functional B3LYP [Becke's three parameter functional (B3) with the correlation functional of Lee, Yang, and Parr (LYP)] methods. In addition, another HF-level simulation (2HF) included the full second coordination shell. Site to site interactions between oxygen-oxygen, oxygen-hydrogen, and hydrogen-hydrogen atoms of all ab initio methods were compared to experimental data. The absence of a second peak and the appearance of a shoulder instead in the gO-O graph obtained from the 2HF simulation is notable, as this feature has been observed so far only for pressurized or heated water. Dynamical data show that the 2HF procedure compensates some of the deficiency of the HF one-shell simulation, reducing the difference between correlated (MP2) and HF results. B3LYP apparently leads to too rigid structures and thus to an artificial slow down of the dynamics.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Azobenzene-containing polyamic acid with excellent Langmuir-Blodgett-Kuhn film formation behavior suitable for all-optical switching

To generate command surfaces for all-optical switching, highly ordered polymeric Langmuir-Blodgett-Kuhn (LBK) multilayers were fabricated onto silicon substrates and gold-coated optical glass slides from novel azobenzene-bearing polyamic acid systems. Pronounced Bragg peaks and well-defined Kiessig fringes observed in the X-ray reflectivity measurement for samples on silicon substrates indicate that these films possess a regularly repeated Y-type LBK multilayer structure and ultrasmooth surfaces. Fourier transform infrared (FT-IR) spectra taken by grazing incidence reflection suggest specific orientations of the functional groups in the layers. The excellent film-forming properties of the polyamic acid allow for a smooth buildup of several hundreds of layers of the LBK films onto gold-coated glass slides, which in turn allows for determining the geometrical thickness and the anisotropic refractive indices of the films by using optical waveguide spectroscopy. Interestingly, the probe laser beam induced a distinct fluorescence signal from the films, which remained even after the film underwent a thermal imidization process at 160 degrees C for 8 h in vacuo. LBK films fabricated from these compounds can be successfully applied for all-optically switching the alignment of liquid crystals by irradiation with light of different wavelengths.     

Bond lengthening and through-bond interactions in p,p'-dibenzene and related molecules

The structure of p,p'-dibenzene (PDB) has been investigated by full geometry optimizations using the empirical force field (EFF) and MINDO/3 methods. While other structural parameters are in good agreement, the central bond length calculated by MINDO/3 (1.595 Å), as confirmed by an ab initio (STO-3G basis set) optimization (1.596 Å), is in striking contrast to the corresponding length calculated by EFF (1.543 Å). A detailed analysis of the electronic structure of PDB based on a quantitative perturbational molecular orbital treatment reveals that through-bond coupling of the four π systems is responsible for an elongation of the σ bond which mediates this interaction. Further studies using the EFF and MINDO/3 approaches demonstrate that extended C-C single bonds can arise even in structures with fewer than four π systems. The effect of substituents on the central bond length in PDB has been briefly investigated. (MINDO/3). A variety of other structures have been identified in which bond lengthening may result from through-bond coupling.     

Die Zusammensetzung der Neutrallipide aus normalen Hirnen alter Menschen

The chemical composition of lipids from six human brains (60–73 years) is reported. The total lipids out of cortex, white matter, diencephalon and cerebellum, pons, and medulla oblongata have been isolated and the neutral lipids have been separated in cerebrosides, sphingomyelines, and lecithins. The highest amount of pure lipids is found in the white matter, the lowest in the cortex. The relation of neutral lipids to acid lipids as well as the amount of cholesterol are about equal for all regions. The white matter shows more cerebrosides and sphingomyelines than the cortex, the opposite being the case for lecithins. The differences are strongly significant. The fatty acids out of the different pure lipid fractions have been analysed as esters by gas chromatography. Stearic and lignoceric acid, and cerebronic and hydroxy nervonic acid respectively are main components of cerebrosides, with only little differences for the different brain regions. The fatty acids of sphingomyelines consist mainly of stearic and nervonic acid; in the white matter these two acids are present about in the same quantity, whereas stearic acid dominates in the cortex and the other sections. Lecithins contain above all palmitic and oleic acid. The amount of the latter in the white matter is higher than that of palmitic acid.     

Dissoziative ionisierung von 2-trimethylsilyl-1-phenoxyethan. Nachweis des nicht-klassischen ethylen-trimethylsilanium-ions in der gasphase

The mass spectrometric investigation of specifically deuterium and ¹³C labelled 2-trimethylsilyl-l-phenoxyethanes proves that the dissociative ionization of β-silyl-substituted ethane derivatives (loss of PhO^?; p-CH₃C₆H₄O^?; and C₄H^?₉ from PhOCH₂CH₂SiMe₃, p-MeC₆H₄OCH₂CH₂SiMe₃ and CH₃CH₂CH(CH₃)CH₂-CH₂SiMe₃, respectively) yields the non-classical bridge ethylene trimethylsilanium ion and not the open-chain isomer. Other stable C₅H₁₃Si^+? ions, characterised by collisional activation mass spectrometry, are the dimethyl n-propyl silicenium ion and the l-trimethylsilyl ethyl cation, both generated from the molecular ions of CH₃CH₂CH₂Si(Cl)Me₂ and CH₃CH(Cl)SiMe₃ via unimolecular loss of Cl^?.     

Diorganomorpholinometallane von Gallium und Indium – Monomer‐Dimer‐Gleichgewichte in Lösung

Diorganomorpholinometalates of Gallium and Indium – Monomer‐Dimer‐Equilibrium in Solution The reaction of Li[N(CH₂CH₂)₂O] (LiMorpholinate; Li(Morph)) with Me₂GaCl and Me₂InCl gives by salt‐elimination the diorganoamidometalates Me₂M(Morph) ( M = Ga: 1 ; M = In: 2 ), respectively. 1 and 2 were characterized by NMR and vibrational spectroscopy as well as by X‐ray structure determinations. According to this, centrosymmetrical dimers are present in the solid state while a monomer‐dimer equilibrium was assumed for the THF‐solution. Cryoscopic molecular weight determinations confirmed our assumptions.     

Synthesis,Characterization and Crystal Structures of new Palladium(II) Complexes and the first Platinum(III) Complex Containing ATT (ATT = 6‐Aza‐2‐thiothymine)

Treatment of the ligand 6‐aza‐2‐thiothymine (ATT, HL, 1 ) with palladium chloride in methanol forms the ionic complex [(HL)₄Pd]Cl₂·8MeOH ( 2 ), while its reaction with palladium iodide in same solvent produces the neutral complex trans‐[(HL)₂PdI₂]·2MeOH ( 3 ) in high yields. The reaction of 1 with Na₂[PdCl₄] in the presence of sodium acetate in a molar ratio of 2:1:2 and with platinum(II) chloride in presence of sodium acetate led to the dimer tetranuclear complexes [(L₄Pd₂)NaCl]₂·8MeOH ( 4 ) and [L₄Pt₂Cl₂]·6MeOH·H₂O ( 5 ). The latter is the first Pt^III complex of the ligand. All complexes were characterized by elemental analyses and IR spectroscopy and the crystal structures of 2 , 3 , 4 and 5 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 at ?80 °C: triclinic space group , a = 1006.6(1), b = 1006.9(1), c = 1158.1(1) pm, α = 85.20(1)°, β = 83.84(1)°, γ = 88.91(1)°, Z = 1, R₁ = 0.0278; for 3 at ?80 °C: triclinic space group , a = 490.5(1), b = 977.2(2), c = 1116.8(2) pm, α = 90.26(1)°, β = 102.33(1)°, γ = 96.08(1)°, Z = 1, R₁ = 0.0394; for 4 at ?80 °C: orthorhombic space group Ccca, a = 1791.7(2), b = 1874.1(2), c = 2044.0(1) pm, Z = 4, R₁ = 0.0341 and for 5 at ?80 °C: monoclinic space group P2₁/c, a = 1464.3(1), b = 2003.7(1), c = 1368.5(1) pm, β = 95.66(1)°, Z = 4, R₁ = 0.0429.     

Concerning the Reaction of the Betain‐Like Compound O2CC(PPh3)2 with Tungsten‐Carbonyl Derivatives; Preparation and Crystal Structures of [(CO)5W{η1‐O2C2(PPh3)2}] and [(CO)4W{η2‐O2C2(PPh3)2}]

The carbodiphosphorane CO₂ adduct O₂CC(PPh₃)₂ ( 1a ) reacts with [(CO)₅W(THF)] and [(CO)₃W(NCEt)₃] to produce the complexes [(CO)₅W{η¹‐O₂CC(PPh₃)₂}] ( 2 ) and [(CO)₄W{η²‐O₂CC(PPh₃)₂}] ( 3 ), respectively. Whereas in 2 the betain‐like ligand is coordinated at the tungsten atom in a monodentate manner, in 3 it acts as a chelating ligand with formation of a WO₂C four‐membered ring. As a by‐product during the reaction with the acetonitrile adduct also some crystals of the hydrolysis product [HC(PPh₃)₂]₂[W₆O₁₉] · 3C₂H₄Cl₂ (4 · 3C₂H₄Cl₂) were isolated. All compounds could be characterized by X‐ray analyses and the usual spectroscopic methods.     

Chelataustauscher auf Oxinbasis, 2. Mitt.: Zur Theorie der Komplexbildung im Chelataustauscher

Zusammenfassung Durch Messung der Verteilungskoeffizienten wird der Nachweis erbracht, daß Chelataustauscher durch Zusatz von Metalloxinaten, z. B. von Al- und Ba-Oxinat, während der Kondensation der Harze selektiver gemacht werden können. In dieser Arbeit werden die pH-lg _ex-kurven verschiedener Oxinatharze diskutiert. Die Form der Kurven wird aus dem Zusammenwirken von Komplexbildung, Donnan-Verteilung und Austauschvorgängen mit Carboxylgruppen abgeleitet. Die Steigungen der pH-lg _ex-kurven werden als Maß für die mittlere Ligandenzahl verwendet. Die Selektivität der Austauscher wird durch die pH₁₀₀-Werte charakterisiert. Damit wird der Nachweis erbracht, daß die sterische Anordnung des Oxins im Harz für die Selektivität mitverantwortlich ist.

---

By measuring the distribution coefficients it is shown that the selectivity of chelate resins can be raised by adding metaloxinates of Al and Ba, e.g., during the condensation. The pH-lg _ex-curves of various oxinate resins are discussed in this paper. The shape of the curves is derived from the interaction between complex formation, Donnan-distribution and exchange with carboxylic groups. The slope of the pH-lg _ex-curves is used as measure for the average ligand number. The selectivity of the resins is characterized by the pH₁₀₀ (pH value at _ex=100). From these experiments it follows conclusively, that the steric arrangement of the oxine in the resin is responsible for the selectivity.

---

---

Mit 8 Abbildungen

---

1. Mitt. (s. S. 1050) wird im folgenden I genannt.