Simultaneous differential pulse-polarographic determination of CS2 and COS gases and its application in the analysis of dithiocarbamate fungicide residues in foods

The differential pulse-polarographic (DPP) determination of both CS₂ and COS gases, after their absorption in a methanolic piperidine reagent and the subsequent application of this technique to the residue analysis of dithiocarbamate fungicides is described. Rectilinear calibration curves for both CS₂ and COS in the respective regions of 1.5–9.2 and 2.1–12.6 μmol/l were obtained. The DPP method has been successfully applied to the determination of thiram residues on apples after a hot acid hydrolysis of the fruits.     

(Eta3-phenylallyl)(phosphanyloxazoline)palladium complexes: X-ray crystallographic studies,NMR investigations,and Ab initio/DFT calculations

All possible (eta(3)-allyl)palladium complexes (1-4) of the ligand (4S)-[2-(2'-diphenylphosphanyl)phenyl]-4,5-dihydro-4-(2-propyl)-oxazole (L 1) and eta(3)-allyl ligands with one to three phenyl substituents at the terminal allylic centers were synthesized and characterized by X-ray crystal structure analysis and, with respect to allylic isomers, by NMR investigations. Equilibrium geometries, electronic structures, and relative energies of isomeric complexes were computed by restricted Hartree-Fock (RHF) and density functional theory (DFT) calculations; experimentally determined isomer ratios could be reproduced. The results allowed important conclusions to be drawn regarding the mechanism of Pd-catalyzed asymmetric allylic substitutions.     

Ruthenium-catalyzed olefin metathesis double-bond isomerization sequence

A novel ruthenium-catalyzed tandem ring-closing metathesis (RCM) double-bond isomerization reaction is described in this paper. The utility of this method for the efficient syntheses of five-, six-, and seven-membered cyclic enol ethers is demonstrated. It relies on the conversion of a metathesis-active ruthenium carbene species to an isomerization-active ruthenium-hydride species in situ. This conversion is achieved by using various additives. Scope and limitations of the different protocols are discussed, and some mechanistic considerations based on (31)P and (1)H NMR spectroscopic studies are presented.     

Quantum chemical aspects of the chelate effect in complexes

A typical “chelate” effect is demonstrated by means of all-electron ab initio LCGO SCF calculations on the [Li(HCONH₂)₂]⁺ complex in different geometrical arrangements. Energetic factors and the electronic structure of the complexes are discussed, showing the chelate effect to be connected with striking changes in bonding, density distribution and electronic energy.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Diphosphacarbollide analogues of the C5H5- anion: isolation of the nido-di- and triphosphacarboranes 7,8,9-P2CB8H10, [7,8,9-P2CB8H9]-, [7,8,10-P2CB8H9]-, and 7,8,9,10-P3CB7H8

Treatment of a solution of excess PCl(3) and PS (PS = "proton sponge" = 1,8-dimethylamino naphthalene) with arachno-4-CB(8)H(14) (1) in CH(2)Cl(2), followed by hydrolysis of the reaction mixture, resulted in the isolation of the eleven-vertex diphosphacarbaborane nido-7,8,9-P(2)CB(8)H(10) (2) (yield 34%) as the main product. Other products isolated from this reaction were the phosphacarboranes nido-7,8,9,10-P(3)CB(7)H(8) (3) (yield 5%) and closo-2,1-PCB(8)H(9) (4) (yield 15%). Compound 2 can be deprotonated by PS in CH(2)Cl(2) or NaH in diethyl ether to give the [nido-7,8,9-P(2)CB(8)H(9)](-) (2(-)()) anion, which gives back the original compound, 2, upon re-protonation. Thermal rearrangement of anion 2(-) (Na(+) salt) at 350 degrees C for 2 h produced the isomeric [nido-7,8,10-P(2)CB(8)H(9)](-) (5(-)()) anion, which was isolated as a PPh(4)(+) salt (yield 86%). Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B] COSY, (1)H{(11)B(selective)}, (1)H{(31)P(selective)}, and gradient-enhanced ([(1)H-(13)C] HSQC) magnetic resonance measurements led to complete assignments of all resonances which are in excellent agreement with the structures proposed. Coupling constants, (1)J((31)P,(13)C), (2)J((31)P,C,(1)H), and (1)J((31)P,(31)P), were calculated using the DFT method B3LYP/6-311+G(d,p). The molecular geometries of all compounds were optimized ab initio at a correlated level of theory (RMP2(fc)) using the 6-31G basis set, and their correctness was assessed by comparison of the experimental (11)B and (13)C chemical shifts with those calculated by the GIAO-SCF/II//RMP2(fc)/6-31G method. The computations also include the structures and chemical shieldings of the still unknown isomers [nido-7,10,8-P(2)CB(8)H(9)](-) (6(-)) and [nido-7,9,8-P(2)CB(8)H(9)](-) (7(-)).     

NMR parameters of the tetrahedrane [Fe2(CO)6(μ-SNH)], studied by experiment and DFT

The intramolecular dynamic behavior of the tetrahedrane-type cluster [Fe₂(CO)₆(μ-SNH)] 1 was studied by ¹³C NMR spectroscopy. The ⁵⁷Fe chemical shift of 1 and the coupling constants ¹ J(⁵⁷Fe,¹³C) were measured. These NMR parameters, and also ¹ J(⁵⁷Fe,¹⁵N), were found to be in good agreement with data calculated by using density functional theory (DFT) methods (B3LYP), based on the geometry calculated at the 6-311+G(d,p) level of theory. The isolobal replacement of the Fe(CO)₃ with BH fragments leads to the tetrahedranes [Fe(CO)₃(BH)(μ-SNH)] 2 and [(HB)₂(μ-SNH)] 3. Both were identified by calculations as minima on the respective potential energy surface (PES). However, the tetrahedrane-type structure of 3 is much higher in energy when compared with the planar cyclic isomers 3a and 3b.     

Neue Ternäre Silber(II)-fluoride: Ag3IIM2IVF14 (MIV = Zr,Hf)

New Ternary Silver (II) Fluorides: Ag M F₁₄ (M^IV = Zr, Hf) Single crystals of deeply blue violet coloured fluorides Ag₃^IIM₂^IVF₁₄ (M^IV = Zr, Hf) have been obtained by heating powder samples under F₂/N₂ (1:2) at T ≈? 600°C. The isotypic compounds crystallizes monoclinic with a = 924.9, b = 668.6, c = 907.3 pm, β = 90.30° (Ag₃Hf₂F₁₄) and a = 922.5, b = 667.6, c = 906.3 pm, β = 91.30° (Ag₃Zr₂F₁₄) (Four circle diffractometer data, Philips PW 1100), spcgr. C2/m-C_2h³ (No. 12), Z = 2. There are two different sorts of Ag²⁺:Ag(1) with coordination number C.N. [Ag(1)] = 4 + 2 and Ag(2) with C.N.[Ag(2)] = 4 + 4 against F^?. Ag(1) can be substituted by Cu²⁺, Ni²⁺, Zn²⁺, Mg²⁺ (all of blue/red violet colour), Ag(2) by Ca²⁺, Cd²⁺, Hg²⁺ (bright green). From (preliminary) powder data CuAg₂Zr₂F₁₄ with a = 912.3(4), b = 661.2(2), c = 899.4(2) pm, β = 90.70° (3) is isotypic, the other compounds seems to be of closely related type of structure.