Heavy atomic-layer doping of B in low-temperature Si epitaxial growth on Si(1 0 0) by ultraclean low-pressure chemical vapor deposition

Electrical characteristics of B atomic-layer doped Si epitaxial films on Si(1 0 0) formed by B atomic-layer formation on Si(1 0 0) at 180 °C and subsequent capping Si deposition at 500 °C using ultraclean low-pressure chemical vapor deposition were investigated. From evaluation results of carrier concentration in the films, by low-temperature SiH₄ exposure at 180-300 °C before the capping Si deposition at 500 °C, 70% improvement of B electrical activity was confirmed, and it is suggested that lowering the temperatures for B atomic-layer formation on Si(1 0 0) as well as SiH₄ exposure before the capping Si deposition is effective to suppress B clustering and to achieve B atomic-layer doped Si films with extremely high carrier concentration.     

Structural Insight into IAPP-Derived Amyloid Inhibitors and Their Mechanism of Action

Designed peptides derived from the islet amyloid polypeptide (IAPP) cross-amyloid interaction surface with Aβ (termed interaction surface mimics or ISMs) have been shown to be highly potent inhibitors of Aβ amyloid self-assembly. However, the molecular mechanism of their function is not well understood. Using solution-state and solid-state NMR spectroscopy in combination with ensemble-averaged dynamics simulations and other biophysical methods including TEM, fluorescence spectroscopy and microscopy, and DLS, we characterize ISM structural preferences and interactions. We find that the ISM peptide R3-GI is highly dynamic, can adopt a β-like structure, and oligomerizes into colloid-like assemblies in a process that is reminiscent of liquid–liquid phase separation (LLPS). Our results suggest that such assemblies yield multivalent surfaces for interactions with Aβ40. Sequestration of substrates into these colloid-like structures provides a mechanistic basis for ISM function and the design of novel potent anti-amyloid molecules.     

An ab initio study of the hyperfine structure in the X2 Pi electronic state of CCCH

The results of an ab initio study of the magnetic hyperfine structure in the X (2)Pi electronic state of CCCH are reported. The potential surfaces for two components of the X (2)Pi electronic state were computed by means of an extensive configuration interaction approach. The electronically averaged hyperfine coupling constants of H and (13)C for (12)C (12)C (12)CH, (13)C (12)C (12)CH, (12)C (13)C (12)CH, and (12)C (12)C (13)CH are obtained as functions of two bending vibrational modes by the density functional theory method. The vibronic wave functions are calculated with the help of a variational approach which takes into account the Renner-Teller effect and spin-orbit coupling. The model Hamiltonian is expressed in terms of the normal bending coordinates. It is found that, due to the generally strong geometry dependence of the hyperfine coupling constants, it is necessary to carry out the vibronic averaging of the corresponding functions in order to obtain the values which can be compared to the results of the measurements. The results of the present study help to reliably interpret the experimental data previously published. They also predict the yet unobserved hyperfine structure in excited vibronic states.     

An ab initio calculation of the anisotropic hyperfine coupling constants in the low-lying vibronic levels of the X 2Pi electronic state of CCCH

The results of ab initio calculations of the vibronically averaged components of the anisotropic magnetic hyperfine tensor in the low-lying vibronic species of the X (2)Pi electronic state of CCCH and CCCD are reported. The electronically averaged hyperfine coupling constants for hydrogen and (13)C in (12)C (12)C (12)CH, (13)C (12)C (12)CH, (12)C (13)C (12)CH, (12)C (12)C (13)CH, and (12)C (12)C (12)CD are obtained as functions of two bending vibrational modes by the density functional theory method. The vibronic wave functions are calculated with help of a variational approach which takes into account the Renner-Teller effect and spin-orbit coupling. The results of the present study help to reliably interpret the experimental data previously published and predict the yet unobserved hyperfine structure in excited vibronic states of CCCH and CCCD.     

A synthesis of pseudoconhydrine and its epimer via hydroformylation and dihydroxylation

A synthesis of the alkaloid pseudoconhydrine and its epimer has been achieved using tandem hydroformylation-condensation to form the six-membered ring and stereoselective dihydroxylation to introduce oxygenation. The stereoselectivity of dihydroxylation can be explained by lipophilic and electrostatic effects, supported by DFT calculations. The alkaloids can be obtained either by regioselective dehydroxylation or by rearrangement, followed by reduction.     

Simultaneous determination of acetylsalicylic acid and salicylic acid in human plasma by isocratic high‐pressure liquid chromatography with post‐column hydrolysis and fluorescence detection

A selective, sensitive and rapid high‐performance liquid chromatography method with post‐column hydrolysis and fluorescence detection was developed for the simultaneous quantification of acetylsalicylic acid and its metabolite salicylic acid in human plasma. Following the addition of 2‐hydroxy‐3‐methoxybenzoic acid as internal standard and simple protein precipitation with acetonitrile, the analytes were separated on a ProntoSIL 120 C₁₈ ace‐EPS column (150 × 2 mm, 3 µm) protected by a C₈ guard column (5 µm). The mobile phase, 10 mm formic acid in water (pH 2.9) and acetonitrile (70:30, v/v), was used at a flow rate of 0.35 mL/min. After on‐line post‐column hydrolysis of acetylsalicylic acid (ASA) to salicylic acid (SA) by addition of alkaline solution, the analytes were measured at 290 nm (λ_ex) and 400 nm (λ_em). The method was linear in the concentration ranges between 0.05 and 20 ng/μL for both ASA and SA with a lower limit of quantification of 25 pg/μL for SA and 50 pg/μL for ASA. The limit of detection was 15 pg/μL for SA and 32.5 pg/μL for ASA. The analysis of ASA and SA can be carried out within 8 min; therefore this method is suitable for measuring plasma concentrations of salicylates in clinical routine. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemisorption of Exchange‐Coupled [Ni2L(dppba)]+ Complexes on Gold by Using Ambidentate 4‐(Diphenylphosphino)benzoate Co‐Ligands

A new strategy for the fixation of redox‐active dinickel(II) complexes with high‐spin ground states to gold surfaces was developed. The dinickel(II) complex [Ni₂L(Cl)]ClO₄ ( 1 ClO₄), in which L^2? represents a 24‐membered macrocyclic hexaaza‐dithiophenolate ligand, reacts with ambidentate 4‐(diphenylphosphino)benzoate (dppba) to form the carboxylato‐bridged complex [Ni₂L(dppba)]⁺, which can be isolated as an air‐stable perchlorate [Ni₂L(dppba)]ClO₄ ( 2 ClO₄) or tetraphenylborate [Ni₂L(dppba)]BPh₄ ( 2 BPh₄) salt. The auration of 2 ClO₄ was probed on a molecular level, by reaction with AuCl, which leads to the monoaurated Ni^II₂Au^I complex [Ni^II₂L(dppba)Au^ICl]ClO₄ ( 3 ClO₄). Metathesis of 3 ClO₄ with NaBPh₄ produces [Ni^II₂L(dppba)Au^IPh]BPh₄ ( 4 BPh₄), in which the Cl^? is replaced by a Ph^? group. The complexes were fully characterized by ESI mass spectrometry, IR and UV/Vis spectroscopy, X‐ray crystallography ( 2 BPh₄ and 4 BPh₄), cyclic voltammetry, SQUID magnetometry and HF‐ESR spectroscopy. Temperature‐dependent magnetic susceptibility measurements reveal a ferromagnetic coupling J=+15.9 and +17.9 cm^?1 between the two Ni^II ions in 2 ClO₄ and 4 BPh₄ (H=?2 JS₁S₂). HF‐ESR measurements yield a negative axial magnetic anisotropy (D<0), which implies a bistable (easy axis) magnetic ground state. The binding of the [Ni₂L(dppba)]ClO₄ complex to gold was ascertained by four complementary surface analytical methods: contact angle measurements, atomic‐force microscopy, X‐ray photoelectron spectroscopy, and spectroscopic ellipsometry. The results indicate that the complexes are attached to the Au surface through coordinative Au? P bonds in a monolayer.     

Global geometry optimization of small silicon clusters at the level of density functional theory

By an application to small silicon clusters Si _N (with N = 4,5,7,10) it is shown that truly global geometry optimization on an ab initio or density functional theory level can be achieved, at a computational cost of approximately 1–5 traditional local optimization runs (depending on cluster size). This extends global optimization from the limited area of empirical potentials into the realm of ab initio quantum chemistry. Received: 24 February 1998 / Accepted: 6 March 1998 / Published online: 17 June 1998     

Tem- and neutron reflection studies on surfaces and interfaces with block copolymers

The behavior of block copolymers at various interfaces is studied by transmission electron microscopy and neutron reflection. A thin film of a symmetric diblock copolymer of styrene and methyl methacrylate forms layer structures when in contact with air and a random copolymer of styrene and acrylonitrile containing 35 wt% acrylonitrile. When the random copolymer has an acrylonitrile content of 25 wt%, a competition between layer formation and diffusion of disordered micelles takes place. Driving force for these processes are different interfacial tensions and a changing miscibility behavior as a function of acrylonitrile contents of the random copolymers. The ordering behavior of a symmetric diblock copolymer of deuterated styrene and isoprene in contact with poly(3,5-dimethyl phenylene ether) is studied by neutron reflection. Polystyrene-block-poly(ethene-co-but-1-ene)-block-polystyrene with cylindrical PS microdomains shows an interfacial phase transition to lamellae near to the interface with different polymers. The morphological studies are in agreement with adhesion data obtained by peel tests on different bilayer specimens.