ASSESSMENT OF GENOTOXICITY AND MUTAGENICITY OF 1,2-DIOXETANES IN HUMAN CELLS USING A PLASMID SHUTTLE VECTOR

Abstract— 1,2-Dioxetanes are efficient sources of triplet excited carbonyl compounds on thermal decomposition. They cause photochemical and photobiological transformations in the dark. In order to study the genotoxicity and mutagenicity of 1,2-dioxetanes, the replicating shuttle vector pZ189 was damaged with 3,3,4-trimethyl-l,2-dioxetane(TrMD) or 3-hydroxymethyl-3,4,4-trimethyl-l,2-dioxetane (HTMD) in vitro and subsequently transfected into normal human lymphoblasts. We found a dose-dependent increase of genotoxicity (decrease of plasmid survival) and increase of mutation frequency with both dioxetanes. However, TrMD was less mutagenic than HTMD at similar genotoxicity. Sequence analysis of the supF gene revealed more point mutations than deletions. Single base substitutions occurred exclusively at G:C sites: 94.6% of point mutations with TrMD and 100% with HTMD were G:C to T:A and G:C to C:G transversions. These are the typical mutations following 7,8-dihydro-8-oxoguanine (8-oxo-G) formation, the main DNA lesion induced by TrMD and HTMD. Only with TrMD we found 5.4% G:C to A:T transitions, probably reflecting the more pronounced ability of TrMD to form some pyrimidine dimers. Our results indicate that 8-oxo-G is also the most relevant modification in in vivo mutagenesis.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

Dampfdruck- und Leitfähigkeitsuntersuchungen der Ionensolvatation in Amiden

The solvating properties of formamide, N-methylformamide, dimethylformamide, N-ethylformamide and diethylformamide have been investigated by means of vapour pressure and conductivity measurements. For the salts and ions, resp. average solvation numbers have been calculated from vapour pressure data and limiting ionic conductances. The solvation numbers are used for a discussion of the influence of N-substituents on the solvating properties of the amides.

---

---

Mit 2 Abbildungen     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.     

Sequentially photocleavable protecting groups in solid-phase synthesis

[reaction: see text] A sequential solid-phase peptide synthesis was developed using both photolabile linker and protecting groups. The chromatic sequential lability between a tert-butyl ketone-derived linker (sensitive to irradiation at 305 nm) and a nitroveratryloxycarbonyl (NVOC) group (sensitive at 360 nm) was exploited to prepare Leu-Enkephalin in a 55% overall yield. This new strategy allows the preparation of peptides in essentially neutral medium, by avoiding the use of common deprotection reagents such as trifluoroacetic acid or piperidine.     

Neue neutrale und kationische Mono‐Aziridin‐Komplexe des Typs [CpMn(CO)2Az], [CpCr(NO)2Az]+ und [(Ph3P)(CO)4ReAz]+ über CO‐, Hydrid‐ und Chlorid‐Abspaltungsreaktionen

Novel Neutral and Cationic Mono‐Aziridine Complexes of the Type [CpMn(CO)₂Az], [CpCr(NO)₂Az]⁺, and [(Ph₃P)(CO)₄ReAz]⁺ via CO‐, Hydride‐, and Chloride‐Elimination Reactions The monoaziridine complexes 1 — 5 are obtained by three differently induced substitution reactions. The photolytically induced CO substitution reaction of [CpMn(CO)₃] with 2, 2‐dimethylaziridine leads to the neutral N‐coordinate aziridine complex [Cp(CO)₂Mn{$\overline{N(H)CMe₂C}$ H₂}] ( 1 ). The protonation of [(Ph₃P)(CO)₄ReH] with CF₃SO₃H and consecutive treatment with 2, 2‐dimethylaziridine or 2‐ethylaziridine gives the salt‐like aziridine complexes [(Ph₃P)(CO)₄Re{$\overline{N(H)CMe₂C}$ H₂}](CF₃SO₃) ( 2 ) or [(Ph₃P)(CO)₄Re{ H₂}](CF₃SO₃) ( 3 ) by hydride elimination reactions. The like‐wise salt‐like complexes [Cp(NO)₂Cr{$\overline{N(H)CMe₂C}$ H₂}](BF₄) ( 4 ) and [Cp(NO)₂Cr{ H₂}](CF₃SO₃) ( 5 ) are synthesized from [CpCr(NO)₂Cl] by chloride elimination with AgX (X = BF₄, CF₃SO₃) in the presence of 2, 2‐dimethylaziridine or 2‐ethylaziridine, respectively. As a result of X‐ray structure analyses, the metal atoms are trigonal pyramidally ( 1, 4, 5 ) or octahedrally ( 2, 3 , cis‐position) configurated; the intact three‐membered rings coordinate through the distorted tetrahedrally configurated N atoms. All compounds 1‐5 are stable with respect to the directed thermal alkene elimination to give the corresponding nitrene complexes; the IR, ¹H‐ and ¹³C{¹H}‐NMR, and MS spectra are reported and discussed.     

Thermisches Verhalten von Caesiumchloroferraten(III) und Caesiumchloroferrat(III)-Hydraten. II. Die Rehydratation der Zersetzungsprodukte von Cs3[FeCl6] – Eine ramanspektroskopische Untersuchung unter definierter Wasserdampfatmosphäre [1]

The Thermal Behaviour of Caesiumchloroferrates(III) and Caesiumehloroferrate(III) Hydrates. II. The Rehydration of Decomposition Products of Cs₃[FeCl₆] — A Raman Spectroscopic Study under Definite Atmosphere of Water Vapour Cs₃[FeCl₆] formed by dehydration of Cs₃[FeCl₆] · H₂O at about 160°C does not change at normal atmosphere within 3 till 4 hours. Rehydration under the vapour pressure of the eliminated water yields the monohydrate in nearly the same time. In the same manner rehydration of the solid mixture of Cs[FeCl₄] and 2 CsCl formed by thermal decomposition of the metastable Cs₃[FeCl₆] (280°C) produces the intermediates Cs₃[Fe₂Cl₉] and Cs₂[Fe(H₂O)Cl₅] in mixtures with CsCl and, finally, Cs₃[FeCl₆] · H₂O. The formation of Cs₃[Fe₂Cl₉] from Cs[FeCl₄] and CsCl is accelerated by water. The reaction cycle has been studied using Raman and IR spectroscopy. The results will be discussed with respect to thermoanalytical data.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

NMR spectroscopy techniques for screening and identifying ligand binding to protein receptors

Binding events of ligands to receptors are the key for an understanding of biological processes. Gaining insight into protein-protein and protein-ligand interactions in solution has recently become possible on an atomic level by new NMR spectroscopic techniques. These experiments identify binding events either by looking at the resonance signals of the ligand or the protein. Ideally, both techniques together deliver a complete picture of ligand binding to a receptor. The approaches discussed in this review allow screening of compound libraries as well as a detailed identification of the groups involved in the binding events. Also, characterization of the binding strength and kinetics is possible, competitive binding as well as allosteric effects can be identified, and it has even been possible to identify ligand binding to intact viruses and membrane-bound proteins.