Zur Anwendung der Neutronenaktivierungsanalyse bei der Untersuchung basaltischer Gesteine ozeanischer und kontinentaler Herkunft

INAA was used to obtain genetic informations on basalts through their weathering and sedimentary products. The rare earths content of the samples could be determined with sufficient accuracy without radiochemical separation using routine computer programs. Basalts of different tectonic setting could be distinguished by their rare earths, thorium and uranium contents. Relations between magmatic rock fragments and sedimentary environment (including manganese nodules) of the Romanche Zone (Atlantic) are discussed.     

An Efficient Synthesis of <Emphasis Type="Italic">O</Emphasis>-Methyl Protected Emodin Aldehyde and Emodin Nitrile

Summary. An efficient synthesis of tri-O-methylemodin aldehyde was achieved via bromination of tri-O-methylemodin utilizing N-bromosuccinimide yielding the monobromo and dibromo derivatives. Sommelet reaction of the monobromomethyl derivative as well as hydrolysis of the dibromomethyl analog with aqueous silver nitrate afforded the protected aldehyde in good yield. Accordingly, both bromo derivatives can be used even when they are obtained as a mixture of the bromination reaction, which could not be controlled easily to yield the bromo products selectively. From the aldehyde the tri-O-methylemodin nitrile was prepared in a one-pot reaction using hydroxylamine-O-sulfonic acid.Received February 18, 2003; accepted March 3, 2003 Published online June 2, 2003     

Simultaneous differential pulse-polarographic determination of CS2 and COS gases and its application in the analysis of dithiocarbamate fungicide residues in foods

The differential pulse-polarographic (DPP) determination of both CS₂ and COS gases, after their absorption in a methanolic piperidine reagent and the subsequent application of this technique to the residue analysis of dithiocarbamate fungicides is described. Rectilinear calibration curves for both CS₂ and COS in the respective regions of 1.5–9.2 and 2.1–12.6 μmol/l were obtained. The DPP method has been successfully applied to the determination of thiram residues on apples after a hot acid hydrolysis of the fruits.     

(Eta3-phenylallyl)(phosphanyloxazoline)palladium complexes: X-ray crystallographic studies,NMR investigations,and Ab initio/DFT calculations

All possible (eta(3)-allyl)palladium complexes (1-4) of the ligand (4S)-[2-(2'-diphenylphosphanyl)phenyl]-4,5-dihydro-4-(2-propyl)-oxazole (L 1) and eta(3)-allyl ligands with one to three phenyl substituents at the terminal allylic centers were synthesized and characterized by X-ray crystal structure analysis and, with respect to allylic isomers, by NMR investigations. Equilibrium geometries, electronic structures, and relative energies of isomeric complexes were computed by restricted Hartree-Fock (RHF) and density functional theory (DFT) calculations; experimentally determined isomer ratios could be reproduced. The results allowed important conclusions to be drawn regarding the mechanism of Pd-catalyzed asymmetric allylic substitutions.     

Barrierless electron transfer bond fragmentation reactions

The ultrafast N-O bond fragmentation in a series of N-methoxypyridyl radicals, formed by one-electron reduction of the corresponding N-methoxypyridiniums, has been investigated as potentially barrierless electron-transfer-initiated chemical reactions. A model for the reaction involving the electronic and geometric factors that control the shape of the potential energy surface for the reaction is described. On the basis of this model, molecular structural features appropriate for ultrafast reactivity are proposed. Femtosecond kinetic measurements on these reactions are consistent with a kinetic definition of an essentially barrierless reaction, i.e., that the lifetime of the radical is a few vibrational periods of the fragmenting bond, for the p-methoxy-N-methoxypyridyl radical.     

Ruthenium-catalyzed olefin metathesis double-bond isomerization sequence

A novel ruthenium-catalyzed tandem ring-closing metathesis (RCM) double-bond isomerization reaction is described in this paper. The utility of this method for the efficient syntheses of five-, six-, and seven-membered cyclic enol ethers is demonstrated. It relies on the conversion of a metathesis-active ruthenium carbene species to an isomerization-active ruthenium-hydride species in situ. This conversion is achieved by using various additives. Scope and limitations of the different protocols are discussed, and some mechanistic considerations based on (31)P and (1)H NMR spectroscopic studies are presented.     

Quantum chemical aspects of the chelate effect in complexes

A typical “chelate” effect is demonstrated by means of all-electron ab initio LCGO SCF calculations on the [Li(HCONH₂)₂]⁺ complex in different geometrical arrangements. Energetic factors and the electronic structure of the complexes are discussed, showing the chelate effect to be connected with striking changes in bonding, density distribution and electronic energy.     

Diphosphacarbollide analogues of the C5H5- anion: isolation of the nido-di- and triphosphacarboranes 7,8,9-P2CB8H10, [7,8,9-P2CB8H9]-, [7,8,10-P2CB8H9]-, and 7,8,9,10-P3CB7H8

Treatment of a solution of excess PCl(3) and PS (PS = "proton sponge" = 1,8-dimethylamino naphthalene) with arachno-4-CB(8)H(14) (1) in CH(2)Cl(2), followed by hydrolysis of the reaction mixture, resulted in the isolation of the eleven-vertex diphosphacarbaborane nido-7,8,9-P(2)CB(8)H(10) (2) (yield 34%) as the main product. Other products isolated from this reaction were the phosphacarboranes nido-7,8,9,10-P(3)CB(7)H(8) (3) (yield 5%) and closo-2,1-PCB(8)H(9) (4) (yield 15%). Compound 2 can be deprotonated by PS in CH(2)Cl(2) or NaH in diethyl ether to give the [nido-7,8,9-P(2)CB(8)H(9)](-) (2(-)()) anion, which gives back the original compound, 2, upon re-protonation. Thermal rearrangement of anion 2(-) (Na(+) salt) at 350 degrees C for 2 h produced the isomeric [nido-7,8,10-P(2)CB(8)H(9)](-) (5(-)()) anion, which was isolated as a PPh(4)(+) salt (yield 86%). Multinuclear ((1)H, (11)B, (31)P, and (13)C), two-dimensional [(11)B-(11)B] COSY, (1)H{(11)B(selective)}, (1)H{(31)P(selective)}, and gradient-enhanced ([(1)H-(13)C] HSQC) magnetic resonance measurements led to complete assignments of all resonances which are in excellent agreement with the structures proposed. Coupling constants, (1)J((31)P,(13)C), (2)J((31)P,C,(1)H), and (1)J((31)P,(31)P), were calculated using the DFT method B3LYP/6-311+G(d,p). The molecular geometries of all compounds were optimized ab initio at a correlated level of theory (RMP2(fc)) using the 6-31G basis set, and their correctness was assessed by comparison of the experimental (11)B and (13)C chemical shifts with those calculated by the GIAO-SCF/II//RMP2(fc)/6-31G method. The computations also include the structures and chemical shieldings of the still unknown isomers [nido-7,10,8-P(2)CB(8)H(9)](-) (6(-)) and [nido-7,9,8-P(2)CB(8)H(9)](-) (7(-)).     

A pilot study for the preparation of a new Reference Material based on antarctic krill

The preparation of new Certified Reference Materials (CRMs) of antarctic matrices forms the backbone of an ongoing project in the framework of the Italian National Program for Antarctic Research. The first CRM of this kind (MURST-ISS-A1 Antarctic Marine Sediment) is already available. The second phase focuses on the certification of antarctic krill, a small shrimp extremely abundant in the Southern Ocean. The total mass of krill available for this purpose is approximately 44 kg and results from the combination of three different catches (Ross Sea, Marguerite Bay and Livingston Island, respectively). The quantification of the following elements in the raw mass appears to be affordable by current analytical techniques, values being in the range of (in μg/g) 0.11–0.30 for As, 0.03–0.12 for Cd, 0.06–0.23 for Cr, 6.1–21 for Cu, 5.7–7.6 for Fe, 0.005–0.008 for Hg, 0.7–1.2 for Mn, 0.013– 0.077 for Ni, 0.04–0.57 for Pb and 12–16 for Zn. On the other hand, the average values ascertained in freeze-dried krill are as a rule one order of magnitude higher, i.e., (in μg/g), 3.2 for As, 0.6 for Cd, 1.8 for Cr, 75 for Cu, 61 for Fe, 0.025 for Hg, 4.6 for Mn, 0.7 for Ni, 2.1 for Pb and 81 for Zn. Information on the pretreatment of krill and details on the planned certification campaign are also given. Received: 10 June 1997 / Revised: 24 September 1997 / Accepted: 28 September 1997