Small silver particles in glass surface layers produced by sodium-silver ion exchange — their concentration and size depth profile

Small spherical silver particles in a surface layer of commercial flat glass were produced by means of sodium-silver ion exchange. In each volume element of the layer there is a Gaussian distribution of the particle diameters. The mean diameter increases with penetration depth. Within one individual sample it can vary from 4.5 nm immediately at the glass surface up to more than 50 nm at the end of the layer. Due to a special preparation technique the results were gained by microspectrophotometric measurements as well as by investigations carried out with the transmission electron microscope and the electron-probe microanalyzer on one and the same sample always as function of the penetration depth.     

Simple Characterization of Green-Synthesized Silver Nanoparticles by Capillary Electrophoresis

The development of methodologies for the characterization of silver nanoparticles (AgNPs) synthesized using natural products has received increasing attention, especially to monitoring its stability and size for further application. In this paper, a capillary electrophoretic (CE) method is presented for characterization of AgNPs synthesized using honey or glucose as reducing agents. A simple electrolyte solution composed of 20 mM sodium borate and 20 mM sodium dodecylsulfate (SDS) at pH 8.5 was used for separation of AgNPs within a short analysis time (<12 min). The obtained results were compared with the traditional characterization techniques, such as transmission electron microscopy (TEM) and dynamic light scattering (DLS), showing satisfactory correlation in terms of size distribution. In addition, valuable information about electrophoretic mobility and zeta potential values of AgNPs was obtained by applying the CE-UV/Vis method. Thus, the proposed methodology represents a straightforward tool for the fast and cost-effective characterization of AgNPs within a single analysis, employing minimal amounts of reagents and samples.     

An Organoruthenium Anticancer Agent Shows Unexpected Target Selectivity For Plectin

Organometallic metal(arene) anticancer agents require ligand exchange for their anticancer activity and this is generally believed to confer low selectivity for potential cellular targets. However, using an integrated proteomics-based target-response profiling approach as a potent hypothesis-generating procedure, we found an unexpected target selectivity of a ruthenium(arene) pyridinecarbothioamide (plecstatin) for plectin, a scaffold protein and cytolinker, which was validated in a plectin knock-out model in vitro. Plectin targeting shows potential as a strategy to inhibit tumor invasiveness as shown in cultured tumor spheroids while oral administration of plecstatin-1 to mice reduces tumor growth more efficiently in the invasive B16 melanoma than in the CT26 colon tumor model.     

Nonlinear Optical Switching in Regioregular Porphyrin Covalent Organic Frameworks

Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser‐induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)‐based porous COFs—Por‐COF‐HH and its dual metalated congeners Por‐COF‐ZnCu and Por‐COF‐ZnNi—have been prepared and present excellent NLO properties. Notably, intensity‐dependent NLO switching behavior was observed for these Por‐COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π‐conjugation and charge‐transfer transition in ZnCu‐Por‐COF enabled a high nonlinear absorption coefficient (β=4470 cm/GW) and figure of merit (FOM=σ₁/σ_o, 3565) value compared to other state‐of‐the‐art materials, including molecular porphyrins (β≈100–400 cm/GW), metal–organic frameworks (MOFs; β≈0.3–0.5 cm/GW), and graphene (β=900 cm/GW).     

Polycondensed nitrogen heterocycles. Part 19. Pyrrolo[1,2-f]phenanthridines by pschorr-type cyclization brought about by hypophosphorous acid

Pyrrolo[1,2-f]phenanthridines were prepared in good yields by the diazotization in acetic acid of the amines la,b and subsequent treatment with hypophosphorous acid. The necessity for hypophosphorous acid in the reaction was demonstrated.     

Characterization of structural transitions in the SLS/decanol/water system

The ternary system sodium-dodecylsulphate (SLS)/decanol/water has been investigated at three different water contents and varying ratios of cosurfactant to surfactant by means of polarized optical microscopy,²H-NMR quadrupole splittings and small angle x-ray scattering. Upon addition of decanol a hexagonal phase transforms into a lamellar phase. For the highest water content of 0.65 no intermediate two-phase regions are detected but nematic phases are formed between. The lamellar phase at low cosurfactant content is very sensitive to changes of temperature and seems to be a so-called defective one with curved interfaces. From the scaling behavior it is concluded that the building units seem to be ribbons of increasing width on addition of cosurfactant or amphiphilic substance. By reaching a decanol mole fraction of 0.4 a classical lamellar phase with well-known behavior is formed. During these transformations the position of the first diffraction maximum changes gradually irrespective of phase transitions. The maximum mole fraction of cosurfactant the lamellar phase of our system can incorporate is 0.77.     

Effect of mobile phase density gradients on efficiency in packed column supercritical fluid chromatography

Summary The efficiency of packed columns was measured as a function of flow rate, temperature, outlet density, and the density differential across the column, unsing pure carbon dioxide as the mobile phase. Although density differentials are often blamed for a serious loss in efficiency in packed column supercritical fluid chromatography, the results show that efficiency was not a function of the density differential. Peak shapes suggest that apparent loss in efficiency is actually due to inadequate solubility of the solute in carbon dioxide.     

Quantification of derivatives of bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) migrated from can coatings into tuna by HPLC/fluorescence and MS detection

A reversed phase high performance liquid chromatographic method combined with fluorescence and mass spectrometric detection in series is presented for the separation and quantification of bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) derivatives in extracts from food can coatings, tuna and oil. Fifteen samples of tuna cans bought in four European countries were investigated. Atmospheric pressure chemical ionization mass spectrometry in the positive ion mode (APCI(+)-MS) allowed to tentatively identify BADGE and NOGE related compounds originating from reactions of the glycidyl ethers with bisphenols, phenol, butanol, water and hydrochloric acid. Quantification was based on the external standard method and fluorescence detection. Mass fractions up to 3.7 μg/g were found for hydrochlorination products of bisphenol F diglycidyl ether (BFDGE + 2HCl) in tuna. Furthermore, total migration quantities of phenolic ether compounds were estimated. The highest values found were 20 μg/g in tuna and 43 μg/g in the oil phase. Received: 16 October 2000 / Accepted: 17 November 2000