Separation of (Z)- and (E)-isomers of thioxanthene and dibenz[b,e]oxepin derivatives with calixarenes and resorcinarenes as additives in nonaqueous capillary electrophoresis

Five acidic calix[4]arenes with carboxylic or sulfonic groups at either the upper or lower rim of the cavity and one resorc[4]arene were investigated to separate three thioxanthenes (flupentixol, clopenthixol, chlorprothixene) and a dibenz[b,e]oxepin derivative (doxepin) with cis-/trans-isomerism by nonaqueous capillary electrophoresis (NACE). Partial filling of the capillary with the UV-absorbing selectors led to a low detection limit and an advantageous signal-to-noise ratio (S/N). A sufficient electrophoretic mobility of the calixarenes towards the anode was necessary to outweigh the oppositely directed electroosmotic flow (EOF). This depended from the functional groups, the dissociation and the hydrodynamic radius of the cyclophanes. In contrast, the resorcinarene was useable only by addition of sodium dodecyl sulfate (SDS) because only the complex of the two selectors had an anodic apparent electrophoretic mobility. p-Sulfonyl-calix[4]arene (ss-a1) was the most capable selector for all E/Z-isomers with maximal alpha-values ranging from 1.056 for doxepin to 1.224 for chlorprothixene. This was due to the sufficient migration in reversed direction to the EOF even at low pH* values of 3.0. Otherwise, electrostatic as well as hydrophobic interactions with the positively charged isomers seem to contribute to a superior recognition. Increasing the concentration up to 15 mM ss-a1 and using acidic media (pH* 5.0) led to high separation efficiency. Changing the organic solvent provides a powerful tool to improve selectivity with N,N-dimethylformamide-methanol (DMF-MeOH)-mixtures for thioxanthenes. Further electrophoretic parameters were optimized, such as the concentration of the electrolytes, the addition of SDS, the kind of electrolytes and the voltage. Distinct differences in selectivities were found between the derivatives with thioxanthene and dibenzo[b,e]oxepin ring system, respectively. Further, the different basic side chain was responsible for the different selectivity at higher pH* values. In contrast, the substitution at position 2 of the thioxanthenes played a secondary role. Based on the studies of single parameters a method for a simultaneous separation of the four pairs of isomers within 13 min was developed.     

Efficient asymmetric synthesis of an azasugar in water

An extremely efficient asymmetric synthesis of a pyrrolidine azasugar was completed in only four steps in water, without the use of protecting groups and in 60% overall yield from a simple, achiral bis-electrophile.     

Synthesis and supramolecular properties of trimethylene-bridged clips

The novel trimethylene-bridged clips 3 and 4 have been synthesized by using repetitive stereoselective Diels-Alder reactions of the benzo- and naphthobismethylenenorbornenes 8 and 19 as dienes and norbornadiene 9 as bisdienophile, and subsequent dehydrogenation of the primary cyclobisadducts 10 and 20 by using 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). Clips 3 and 4 serve as receptors for a variety of electron-deficient neutral and cationic aromatic substrates, comparable to the molecular tweezers 1 and 2. The thermodynamic parameters of the complex formation, K(a) and DeltaG, were determined by (1)H NMR titration experiments and, in the case of the highly stable complex TCNB 32@4, by the use of isothermal titration microcalorimetry. The finding that clip 4 forms more stable complexes than 3 can be explained by the larger van der Waals contact surfaces of the naphthalene sidewalls in 4 compared to the corresponding benzene systems in 3. In the complexes with 4 as receptor, the plane of each aromatic substrate molecule is calculated to be oriented almost parallel to the naphthalene sidewalls. However, in the complexes of tweezers 2, the substrate is usually oriented parallel to the central naphthalene spacer unit. Due to the more open topology of 4, most complexes were calculated to consist of two or more equilibrating noncovalent conformers.     

Determination of low levels of polymer additives migrating from polypropylene to food simulated liquids by capillary SFC and solvent venting injection

Summary Methods for the determination of specific migration of polymer additives from polypropylene to aqueous acetic acid and isooctane have been studied. The migrants were extracted from aqueous acetic acid and characterized by supercritical fluid chromatography (SFC) with flame ionization detection (FID) and mass spectrometry (MS). The isooctane simulant was concentrated and injected directly into the SFC. Injection of extracts after incubation, using the solvent venting injection technique in the SFC, enabled additive concentrations as low as 10 ppb in 150 ml simulant to be determined, corresponding to a specific migration level of approximately 1 g additive/dm² polymer.     

AB initio SCF LCAO MO Calculations on styrene

Minimal basis set ab initio SCF LCAO MO calculations with gaussian-type have been performed for different conformations of the styrene molecule. The computations show the molecule to be planar and the rotational barrier of the vinyl group is estimated to 3.9 kcal/mole.     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from Stems of <Emphasis Type="Italic">Symphytum asperum</Emphasis> and <Emphasis Type="Italic">S. caucasicum</Emphasis>

Two high-molecular-weight (>1000 kDa) water-soluble preparations were isolated from stems of Symphytum asperum and S. caucasicum. Their basic component was established as poly[hydroxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene], analogous to that of high-molecular-weight (>1000 kDa) preparations from roots of these same plants, using IR and NMR spectral data. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 303–305, July–August, 2005. An erratum to this article is available at .     

Fabrication and characterization of high-temperature microreactors with thin film heater and sensor patterns in silicon nitride tubes

In this paper the fabrication and electrical characterization of a silicon microreactor for high-temperature catalytic gas phase reactions, like Rh-catalyzed catalytic partial oxidation of methane into synthesis gas, is presented. The microreactor, realized with micromachining technologies, contains silicon nitride tubes that are suspended in a flow channel. These tubes contain metal thin films that heat the gas mixture in the channel and sense its temperature. The metal patterns are defined by using the channel geometry as a shadow mask. Furthermore, a new method to obtain Pt thin films with good adhesive properties, also at elevated temperatures, without adhesion metal is implemented in the fabrication process. Based on different experiments, it is concluded that the electrical behaviour at high temperatures of Pt thin films without adhesion layer is better than that of Pt/Ta films. Furthermore, it is found that the temperature coefficient of resistance (TCR) and the resistivity of the thin films are stable for up to tens of hours when the temperature-range during operation of the microreactor is below the so-called "burn-in" temperature. Experiments showed that the presented suspended-tube microreactors with heaters and temperature sensors of Pt thin films can be operated safely and in a stable way at temperatures up to 700 degrees C for over 20 h. This type of microreactor solves the electrical breakdown problem that was previously reported by us in flat-membrane microreactors that were operated at temperatures above 600 degrees C.     

Synthetically attractive indolization processes and newer methods for the preparation of selectively substituted indoles

The synthetically interesting processes available for indolization reactions are discussed and illustrated in tabular form and particular emphasis is placed on the more recent methods.