Theoretical study of the association of glycine molecules on ionic crystals NaCl,KI, LiF in aqueous solution

Summary The adsorption of glycine on different crystals (namely NaCl, KI, LiF) is studied in an isolated state and in water by methods of theoretical chemistry in view of determining the preferential adsorption sites, the modifications of adsorbing crystal properties, and the role played by the electronic structure of the adsorbed molecule, by the solvent and by the parametric concordance on various sites of the structure.     

Determination of uranium(VI) in sea water by cathodic stripping voltammetry of complexes with catechol

Polarographic (d.c.) measurements showed that complex ions of uranium(VI) with catechol adsorb on the dropping mercury electrode. This effect is used to determine uranium(VI) directly in sea water. Optimal conditions include pH 6.8, 2 × 10^?3 M catechol, and a collection potential between ?0.1 and ?0.4 V (vs. Ag/AgCl) at a hanging mercury drop electrode. The cathodic scan is made with the linear-scan or differential-pulse mode (d.p.c.s.v.). The detection limit with the d.p.c.s.v, mode is 3 × 10^?10 M after a collection period of 2.5 min. Between pH 6 and 8, the peak height increases with pH and with catechol concentration up to 5 × 10^?3 M. There is linear relationship between the collection time and the measured peak height until the drop surface becomes saturated. With a collection period of 3 min, the reduction current increases linearly with the metal concentration up to about 5 × 10^?3 M U(VI). The maximum adsorption capacity of the mercury drop is 4.4 × 10^?10 mol cm²; each complex ion then occupies 0.38 nm², equivalent to the size of about one catechol molecule. Interference by high concentrations of Fe(III) is overcome by selectively adsorbing U(VI) at a collection potential near the reduction potential of Fe(III). Organic surfactants reduce the peak height for uranium by up to 75% at unnaturally high concentrations only (4 mg l^?1 Triton X-100). Competition by high concentrations of Cu(II) for space on the surface of the drop is eliminated by addition of EDTA.     

ACTION SPECTRA OF PHTHALOCYANINES WITH RESPECT TO PHOTOSENSITIZATION OF CELLS

Human carcinoma cells (NHIK 3025 cells) and Chinese hamster cells (V79 cells) were incubated with AlPcS1, AlPcS2 and AlPcS4, phthalocyanines with different lipophilicity but with similar photochemical properties when in monomeric solutions. The absorption- and fluorescence spectra of the dyes in the cells were recorded as well as their action spectra with respect to sensitizing cells to photoinactivation. These spectra show that under the present conditions AlPcS1 is strongly aggregated in both cell lines; AlPcS2 is aggregated in V79 cells but much less so in NHIK 3025 cells. A main finding is that the shapes of the action spectra are similar to that of the fluorescence excitation spectra, but not to the absorption spectra, indicating that the photosensitizing effects of the dyes are mainly due to their monomeric fraction in the cells. AlPcS2 and AlPcS4 localize intracellularly mainly in lysosomes while AlPcS1 was found to be more diffusely distributed in cells. As measured per quantum of fluorescence emitted, AlPcS1 and AlPcS2 are more efficient sensitizers than AlPcS4. The difference in efficiency between AlPcS2 and AlPcS4 is supposedly due to a different localization pattern on the suborganelle level.     

A TEST OF DIFFERENT PHOTOSENSITIZERS FOR PHOTODYNAMIC TREATMENT OF CANCER IN A MURINE TUMOR MODEL

Abstract The efficiency of different sensitizers for photodynamic therapy (PDT) was tested using a model system with a C3H mammary carcinoma growing subcutaneously on the dorsal side of mouse feet. Growth curves were constructed from which growth delay and doubling time in the regrowth phase were calculated. As PDT induced oedema in the mouse foot, this model system also allowed assessment of normal tissue response.
The following sensitizers were tested: hematoporphyrin derivative (HpD), Photofrin II (PII), tetraphenylporphinetetrasulfonate (TPPS₄), acridine orange (AO), phthalocyanine tetrasulfonate (PCTS), Al- and Zn-phthalocyanine tetrasulfonate (A1PCTS and ZnPCTS). For tumor control, the following sensitizer efficiencies were found: PII > HpD > AIPCTS > TPPS₄ >>> ZnPCTS, PCTS, AO. With regard to sensitizing normal-tissue damage: PII > AIPCTS, TPPS₄ > HpD, ZnPCTS, PCTS. The results suggest that AIPCTS should be further evaluated for use in PDT.     

Analysis of acrylamide in cooked foods by liquid chromatography tandem mass spectrometry

A method using liquid chromatography tandem mass spectrometry (LC-MS-MS) with electrospray for the analysis of acrylamide in foods is reported. The method comprises the addition of deuterium-labelled acrylamide-d3, extraction with water, mixed mode solid phase extraction, ultrafiltration and a graphitised carbon column for chromatography. The transitions m/z 72 > 55, 72 > 54, 72 > 44, 72 > 27, 72 > 72 and 75 > 58 were recorded in multiple reaction monitoring mode for identification and quantification. In-house validation data for products from potatoes and cereals (30 to 10,000 microg kg(-1)) are presented (accuracy 91 to 102%, relative standard deviation 3 to 21%). Interlaboratory validation data (comparison with gas chromatography mass spectrometry, 25 to 2000 microg kg(-1)) showed excellent results (r2 = 0.998).     

Gradient elution chromatography of polymers on reversed-phase columns with tetrahydrofuran as an eluent component

Summary The chromatographic separation of poly(styrene-co-acrylonitrile) samples (SAN) with an elution gradient iso-octane/tetrahydrofuran is solubility governed. This has been proven by the correspondence between the volume fraction of precipitant as estimated from elution data and as measured by turbidimetric titration, by the molar mass dependence of retention, and by the temperature effect on retention. In addition to these arguments data are presented which have been obtained on columns with different packing materials ranging from bare silica through CN bonded phase material to hydrocarbonaceous stationary phases. The eluent composition at peak position is nearly independent of the stationary phase used. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Determination of cannabinoids in cannabis products using liquid chromatography-ion trap mass spectrometry

A method was developed and validated for the simultaneous determination of five cannabinoids, viz. cannabidiol (CBD), cannabidiol acid (CBD-COOH), cannabinol (CBN), delta9-tetrahydrocannabinol (THC), and 3'-carboxy-delta9-all-trans-tetrahydrocannabinol (THC-COOH) in cannabis products. The cannabinoids were extracted from the grinded cannabis samples with a mixture of methanol-chloroform and analysed using liquid chromatography with ion-trap-mass-spectrometry (LC-IT-MSn). For quantification the two most abundant diagnostic MS-MS ions of the analyte in the sample and external standard were monitored. For confirmation purposes the EU criteria as described in Commission Decision 2002/657/EC were followed. Fully satisfactory results were obtained, that is, unequivocal confirmation according to the most stringent EU criteria was possible. The limits of quantification were 0.1 g/kg for CBD, 0.04 g/kg for CBD-COOH, 0.03 g/kg for CBN, 0.28 g/kg for THC and 9.9 g/kg for THC-COOH. The repeatabilities, defined by R.S.D., were 2% for CBN, THC and THC-COOH at the concentration levels of respectively 0.023, 3.3 and 113 g/kg and 5% for CBD-COOH at the level of 0.34 g/kg (n = 6).     

The determination of platinum in sea water by adsorptive cathodic stripping voltammetry

The catalytic effect of the formazone complex with platinum on the development of hydrogen at a mercury electrode is used to provide a very sensitive method of determining dissolved platinum in fresh and sea water by adsorptive cathodic stripping voltammetry. The optimal analytical conditions include the addition of 0.012% (w/v) formaldehyde, 0.0015% (w/v) hydrazine and 0.5 M sulphuric acid to the sea water. The complex is adsorbed for 1–20 min at ?0.925 V on the hanging mercury drop electrode, followed by a differential-pulse scan in a negative direction. The hydrogen reduction peak catalysed by the platinum complex appears at ?1.045 V. The limit of detection is 0.04 pM Pt with an adsorption time of 10 min, which is quite sufficient to determine dissolved platinum in sea water. The interference of surface-active compounds is eliminated by ultraviolet irradiation of the acidified sample. The method is applied to several sea-water samples. Comparative experiments showed that stripping chronopotentiometry is not sufficiently sensitive to determine platinum in sea water without preconcentration.     

Expanding the DNA-recognition repertoire for zinc finger proteins beyond 20 amino acids

The design of DNA binding domains based on the Cys2His2 zinc finger motif has proven to be a successful strategy for the specific recognition of novel DNA sequences. Although considerable effort has been devoted to the generation of zinc finger proteins with widely varying DNA-binding preferences, only a limited number of potential DNA binding sites have been targeted with a high degree of specificity. These restrictions on zinc finger design appear to be a consequence of the limited repertoire of side-chain lengths and functionalities available with the 20 proteinogenic amino acids. To demonstrate that these limitations can be overcome through the use of "unnatural" amino acids, expressed protein ligation was employed to incorporate the amino acid citrulline into a single position within a three-zinc finger protein. As anticipated, the resulting semisynthetic protein specifically recognizes adenine in the appropriate position of its binding site.     

Magnetism, electron paramagnetic resonance, electrochemistry, and mass spectrometry of the pentacopper(II)-substituted tungstosilicate [Cu5(OH)4(H2O)2(A-alpha-SiW9O33)2]10-, a model five-spin frustrated cluster

The dimeric, pentacopper(II)-substituted tungstosilicate [Cu(5)(OH)(4)(H(2)O)(2)(A-alpha-SiW(9)O(33))(2)](10)(-) (1) has been characterized by single-crystal X-ray diffraction, elemental analysis, IR, electrochemistry, magnetic measurements, electron paramagnetic resonance (EPR), and mass spectrometry (MS). Magnetization and high-field EPR measurements reveal that the pentameric copper core {Cu(5)(OH)(4)(H(2)O)(2)}(6+) of 1 exhibits strong antiferromagnetic interactions (J(a) = -51 +/- 6 cm(-)(1), J(b) = -104 +/- 1 cm(-)(1), and J(c) = -55 +/- 3 cm(-)(1)) resulting in a spin S(T) = (1)/(2) ground state. EPR data show that the unpaired electron spin density is localized on the spin-frustrated apical Cu(2+) ion with g(zz) = 2.4073 +/- 0.0005, g(yy) = 2.0672 +/- 0.0005, g(xx) = 2.0240 +/- 0.0005, and A(zz) = -340 +/- 20 MHz (-0.0113 cm(-)(1)). 1 can therefore be considered as a model system for a five-spin, electronically coupled, spin-frustrated system. Polyanion 1, which is stable over a wide pH domain (pH 1-7), was characterized by cyclic voltammetry (CV) in a pH 5 medium. Its CV was constituted by an initial two-step reduction of the Cu(2+) centers to Cu(0) through Cu(+), followed at more negative potential by the redox processes of the W centers. Controlled potential coulometry of 1 allows for the reduction of the five Cu(2+) centers, as seen by consumption of 10.05 +/- 0.05 electrons per molecule. Polyanion 1 triggers efficiently the electrocatalytic reduction of nitrate and nitrite, and it also catalyzes the reduction of N(2)O. To our knowledge, this is the first example of N(2)O catalytic reduction by a polyoxoanion. Fourier transform ion cyclotron resonance MS was used to unambiguously assign the molecular weight of the solution-phase species 1 and the oxidation states of the Cu atoms in the central {Cu(5)(OH)(4)(H(2)O)(2)}(6+) core. Infrared (IR) multiphoton dissociation MS/MS of 1 showed evidence of a condensation process similar to bronze formation at low irradiation intensity. Higher IR intensity resulted in the formation of stable fragments consistent with those previously observed in the solution chemistry of polyoxoanions.