Cyclization reaction of polyacrylonitrile and poly(styrene-co-acrylonitrile) studied by PVT measurements

Pressure, volume, temperature (PVT) measurements reveal that during the intramolecular cyclization reaction of poly(acrylonitrile) (PAN) and poly(styrene-co-acrylonitrile) (SAN) the volume decreases. This volume contraction becomes smaller with increasing styrene content in the random copolymers and should be related to the simultaneous decrease of longer acrylonitrile homo-sequences. The onset temperature of the cyclization reaction is raised with higher styrene contents in the random copolymers. Thus, it can be excluded that the cyclization reaction has a major influence on the discoloration process of SAN samples having relatively small acrylonitrile contents (less than 50 mol-%) during thermal annealing below 300°C.     

Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

Strategy for structural elucidation of drugs and drug metabolites using (MS)n fragmentation in an electrospray ion trap

Triple-stage quadrupole (TSQ) electrospray ionization (ESI) tandem mass spectrometry (MS/MS) and ion trap ESI-MS/MS can be used to cleave protonated molecules to produce carbocations and neutral molecules in the positive ion mode. Dissociation products which correspond to protonated forms of neutral fragment molecules can also be trapped and detected. These protonated molecules in turn can cleave via carbocation cleavage, ipso cleavage, onium cleavage or McLafferty or related rearrangements. One can elucidate the structures of metabolites from the differences in m/z ratios of the fragments arising from the original drug compound and its metabolite. This strategy for structural elucidation is further facilitated by estimates of the reactivity of drugs with oxygen diradicals involved in cytochrome P-450 cycles.     

Kinetic studies of CO2dissociation on supported Ni catalysts

Summary In order to investigate the kinetics of CO₂dissociation on supported nickel catalysts, a novel technique, which can give the surface reaction rate constants with no information on the number of active sites, was developed. It was revealed that CO₂dissociation was more enhanced on TiO₂support than on other metal oxide ones. The activity pattern and activation energies were in good agreement with those obtained by a conventional pulse technique using the number of active sites, suggesting the validity of the present technique for investigating the kinetics of the surface reaction.</o:p>     

Infrared studies of Se-based polynary chalcogenide glasses (II): YxZxSe100−2x (Y = Ge,As; Z = As,Te)

The infrared (IR) absorption spectra for Y_xZ_xSe_100?2x glasses (Y = Ge, As;Z = As, Te), x = 2.5 and 5.0 are measured in the wavenumber region 700-60 cm^?1 at room temperature. These IR spectra are explained by comparing with the IR spectra already reported for the binary glasses such as Ge–Se, As–Se and Se–Te. In Ge_xAs_xSe_100-2x glasses (x ? 5.0), the main spectral features as well explained by both the spectra of Ge_xSe_100?x and As_xSe_100?x glasses. Main structural units in these glasses are considered to be GeSe₄ tetrahedra and AsSe₃ pyramids, and Se₈ rings and Se_n chains which are the units in pure glassy Se. In Ge_xTe_xSe_100?2x glasses (x ? 5.0) and IR band which cannot be explained by either the spectra of Ge_xSe_100?x or Se_100?xTe_x glasses appears at 210 cm^?1. This band is considered to be due to Ge–Te bonds. The IR spectra of As_xTe_x Se_100?2x glasses (x ? 5.0) are well explained by both the spectra of As_xSe_100?x and Se_100?xTe_x glasses. It is concluded that As and Te atoms combine with Se atoms in the forms of AsE₃ pyramids and Se₅Te₃ mixed rings, respectively.     

Performance characteristics between horizontally and vertically oriented electrodes EHD ESP for collection of low-resistive diesel particulates

The novel electrohydrodynamically-assisted electrostatic precipitator (EHD ESP) was developed to suppress particle reentrainment for collection of low resistive diesel particulates. The collection efficiency was compared between vertically and horizontally oriented electrodes of the EHD ESP using 400 cc diesel engine. The particle size dependent collection efficiency was evaluated for the particle size ranging in 20 to 5000 nm using a scanning mobility particle sizer (SMPS) and a particle counter (PC). Both horizontally and vertically oriented EHD ESP showed an excellent suppression of particle reentrainment. However, the horizontally oriented electrode EHD ESP showed significantly improved for the particle size of 300–500 nm in comparison with vertically oriented electrode EHD ESP, resulting in more than 90% collection efficiency for all particle size range. The EHD ESP has high potential especially for highly concentrated marine diesel engine emission control.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Synthesis of a Pentacene‐Type Silaborin via Double Dehydrogenative Cyclization of 1,4‐Diboryl‐2,5‐disilylbenzene

A new pentacene‐type silaborin, in which three benzene rings are bridged by silicon and boron atoms, has been synthesized and characterized by using NMR spectroscopy and X‐ray crystallographic analysis. The precursor, 1,4‐bis(dimesitylboryl)‐2,5‐bis(phenylsilyl)benzene ( 4 ), was prepared by stepwise introduction of a silyl group and a boryl group to a benzene ring starting from 1,4‐dibromobenzene. Double cyclization of 4 proceeds by a H‐Mes exchange and a B‐H/C‐H dehydrogenative condensation to afford pentacene‐type silaborin 5 . X‐ray crystal structure analysis reveals that 5 adopts a bent structure rather than a planar one. UV/Vis spectra and DFT calculations for 5 reveal a lowering of the LUMO energy level compared with corresponding anthracene‐type 3 .     

Enzymatic silicone oligomerization catalyzed by a lipid-coated lipase

A lipid (1)-coated lipase can catalyze the oligomerization of diethoxydimethylsilane (DEDMS) in isooctane containing 2wt% water, where the polymerization occurs at the OH group of the coating lipid (1) in the enzyme cavity.