A practical approach to high performance capillary electrophoresis with biosynthetic human growth hormone as a model protein

Biosynthetic human Growth Hormone (B-hGH) is a protein comprising 191 amino acids. The molecular weight is 22,125 and the isoelectric point is close to pH 5. Due to the ready availability of closely related analogues B-hGH was used as a model protein thus allowing for the demonstration and evaluation of the high resolution capability of high performance capillary electrophoresis (HPCE). The same apparatus was used throughout the experiments and an optimum signal-to-noise ratio was found at 200 nm. Linearity was observed between peak area, retention time and the hGH concentration or sample introduction time. Baseline separation of hGH, desamido hGH and didesamido hGH was obtained. Examples showing analysis with 1 million theoretical plates per meter, high speed separation, simultaneous analysis of multiple samples, sample stacking, hGH tryptic digest, and hGH lysate are reported. The use of electrophoretic velocities instead of apparent velocities for peak identification is illustrated.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

MCSCF reaction-path energetics and thermal rate-constants for the reaction of3NH with H2

Summary The intrinsic reaction-path, reactants, transition state and products for the reaction of NH (^3–)+H₂ (¹ _g ⁺ ) NH₂ (²B₁)+H (²S) involving the lowest triplet electronic state of NH₃ were calculated using multi-configuration (MC) SCF methods. The calculated change of internal energy for the reaction of 11.0 kcal mol^–1 agrees with the experimental value within 2 kcal mol^–1. The barrier to reaction is 23.4 kcal mol^–1 high. The harmonic MCSCF reaction-path potential was calculated and canonical variational transition state theory calculations of the rate constants performed over a temperature range from 400 to 2500 K. The computed rate constants are generally two orders of magnitude smaller than those of the comparable reaction of OH with H₂, whereas those of the reverse reaction are by a factor of 20 larger than those of OH₂ with H.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.     

A closed-shell coupled-cluster treatment of the Breit-Pauli first-order relativistic energy correction

First-order relativistic corrections to the energy of closed-shell molecular systems are calculated, using all terms in the two-component Breit-Pauli Hamiltonian. In particular, we present the first implementation of the two-electron Breit orbit-orbit integrals, thus completing the first-order relativistic corrections within the two-component Pauli approximation. Calculations of these corrections are presented for a series of small and light molecules, at the Hartree-Fock and coupled-cluster levels of theory. Comparisons with four-component Dirac-Coulomb-Breit calculations demonstrate that the full Breit-Pauli energy corrections represent an accurate approximation to a fully relativistic treatment of such systems. The Breit interaction is dominated by the spin-spin interaction, the orbit-orbit interaction contributing only about 10% to the total two-electron relativistic correction in molecules consisting of light atoms. However, the relative importance of the orbit-orbit interaction increases with increasing nuclear charge, contributing more than 20% in H(2)S.     

On describing the steady absorption of brownian particles by a restricted random walk

This paper is concerned with idealizing brownian motion as a random walk, using the diffusion equation, and finding the boundary condition at an absorbing surface - all with an eye towards chemical kinetics. Three models of random walk (due to Smoluchowski, Fermi, and Lorentz) are considered, and it is concluded that the lorentzian model is the most appropriate.     

The complete 51V MAS NMR spectrum of surface vanadia nanoparticles on anatase (TiO2): vanadia surface structure of a DeNOx catalyst

The first observations of the complete manifold of spinning sidebands (ssbs) including both the central and satellite transitions in (51)V MAS NMR spectra of surface vanadia nanoparticles on titania in DeNO(x) catalysts are presented. (51)V quadrupole coupling and chemical shift anisotropy parameters for the dominating vanadia structure are determined from (51)V MAS NMR spectra recorded at 9.4 and 14.1 T. Based on correlations previously established between (51)V NMR parameters and crystal structure data for inorganic vanadates, the NMR data are consistent with vanadium in a distorted octahedral oxygen coordination environment for the so-called strongly bonded vanadia species on the surface. The investigation includes two vanadia-titania model catalysts and six industrial-type DeNO(x) catalysts.     

Molecular recognition: comparative study of a tunable host-guest system by using a fluorescent model system and collision-induced dissociation mass spectrometry on dendrimers

Host-guest interactions between the periphery of adamantylurea-functionalized dendrimers (host) and ureido acetic acid derivatives (guest) were shown to be specific, strong and spatially well-defined. The binding becomes stronger when using phosphonic or sulfonic acid derivatives. In the present work we have quantified the binding constants for the host-guest interactions between two different host motifs and six different guest molecules. The host molecules, which resemble the periphery of a poly(propylene imine) dendrimer, have been fitted with an anthracene-based fluorescent probe. The two host motifs differ in terms of the length of the spacer between a tertiary amine and two ureido functionalities. The guest molecules all contain an acidic moiety (either a carboxylic acid, a phosphonic acid, or a sulfonic acid) and three of them also contain an ureido moiety capable of forming multiple hydrogen bonds to the hosts. The binding constants for all 12 host-guest complexes have been determined by using fluorescence titrations by monitoring the increase in fluorescence of the host upon protonation by the addition of the guest. The binding constants could be tuned by changing the design of the acidic part of the guest. The formation of hydrogen bonds gives, in all cases, higher association constants, demonstrating that the host is more than a proton sensor. The host with the longer spacer (propyl) shows higher association constants than the host with the shorter spacer (ethyl). The gain in association constants are higher when the urea function is added to the guests for the host with the longer spacer, indicating a better fit. Collision-induced dissociation mass spectrometry (CID-MS) is used to study the stability of the six motifs using the corresponding third generation dendrimer. A similar trend is found when the six different guests are compared.     

Development of quantitative vitellogenin-ELISAs for fish test species used in endocrine disruptor screening

The yolk protein precursor vitellogenin (Vtg) in plasma has proved to be a simple and sensitive biomarker for assessing exposure of fish to environmental estrogens. Within international bodies such as the Organization for Economic Cooperation and Development (OECD) work is ongoing to develop screening and testing programmes for endocrine disrupting effects of new chemicals, and in the focus of this development are the fish test species common carp (Cyprinus carpio), fathead minnow (Pimephales promelas), zebrafish (Danio rerio) and Japanese medaka (Oryzias latipes). In this study we have developed quantitative enzyme linked immunosorbent assays (ELISAs) for Vtg in common carp/fathead minnow, zebrafish and Japanese medaka. The assays were developed using a combination of monoclonal and polyclonal fish Vtg antibodies in a sandwich format, using stabilized Vtg from the test species as a standard. The carp Vtg ELISA has a working range of 1–63 ng/mL, a minimal detection limit of 0.6 ng/mL, and may also be used for quantification of Vtg in fathead minnow. In fathead minnow whole-body homogenate samples, the practical detection limit is 400 ng/mL due to the matrix effect. The zebrafish Vtg ELISA has a working range of 0.5–63 ng/mL, a minimal detection limit of 0.4 ng/mL, and a practical detection limit of 200 ng/mL in whole-body homogenate samples. The medaka Vtg ELISA has a working range of 0.25–16 ng/mL, a minimal detection limit of 0.1 ng/mL, and a practical detection limit of 125 ng/mL in whole-body homogenate samples. The intra- and inter-assay variations were below 20% for all assays. The assays were evaluated with sets of representative samples spanning the wide dynamic range of Vtg-levels found in fish exposed to environmental estrogens, and all three assays are currently undergoing international inter-laboratory validation.     

Redox thermochemistry of SrFe1-xCoxO3-d

The enthalpy of oxidation of SrFe_1-xCo_xO_3-d with x=0.33 and 0.67 has been determined by adiabatic calorimetry; average values for x=0.33 and 0.67 are -67±11 and -49.5±9 kJ (mol O₂)^-1. These data and the previously reported value for SrFeO_3-d suggest that the enthalpy of oxidation for pure (perovskite-type) SrCoO_3-d is close to zero. Earlier reported composition - partial pressure data for SrFe_0.67Co_0.33O_3-d are reproduced when preferential oxidation of iron is assumed for low partial pressures of oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.