Anomalous anisotropies and field dependencies of the muon Knight shift and the relaxation rate in monocrystalline Bi

The angular dependence of the muon Knight shift,K _μ, and the muon relaxation rate in Bi at 11 K were measured in external magnetic fields up to 1 T. BothK _μ and the second moment,M ₂, are field dependent and involveP ₄ ⁰(cos θ) andP ₄ ³(cos θ) terms in the angular dependence. The Knight shift behaviour is discussed in terms of the dipole-dipole interaction and the de Haas-van Alphen effect, a consistent interpretation was not achieved in either case. The field dependence ofM ₂ is in complete contrast to the second moment calculations and points to a field dependent redistribution of the charge distribution around the interstitial site.     

A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering

A thermal model of the interaction of pulsed near-infrared laser radiation from a Nd:YAG laser was made, taking the measured powder properties such as reflectance, optical penetration depth and thermal conductivity into account. It allows an estimation of the evolution of two different temperatures: the average temperature of the powder (taken over the grains in a volume given by the laser beam diameter and the optical penetration depth) and the temperature distinction within a single grain. It showed that in pulsed mode consolidation can be achieved at much lower average power as the surface of the powder particles are molten but their cores remain at nearly room temperature. This leads to a much lower average temperature and therefore a dramatic decrease in residual thermal stresses in the finished piece. The results of the model were experimentally tested and confirmed. Received: 26 July 2001 / Accepted: 23 November 2001 / Published online: 23 January 2002     

Combined confocal and magnetic resonance microscopy

Confocal fluorescence optical microscopy and magnetic resonance microscopy are each used to study live cells in a minimally invasive way. Both techniques provide complementary information. Therefore, by examining cells simultaneously with both methodologies, more detailed information is obtained than is possible with each microscope individually. In this paper two configurations of a combined confocal and magnetic resonance microscope are described. The first configuration is capable of studying large single cells or three-dimensional cell agglomerates, whereas the second configuration is designed for the investigation of monolayers of mammalian cells. In both cases the sample compartment is part of a temperature regulated perfusion system. Images obtained with the combined system are shown forXenopus laevis oocytes, model JB6 tumor spheroids, and a single layer of Chinese hamster ovary cells. Finally, potential applications of the combined microscope are discussed.     

Day-side auroral signatures based on simultaneous, coordinatedobservations at Svalbard and Greenland

The height distribution of the dayside cusp aurora and the relation between optical emissions and net downward electron energy flux are discussed. These two important characteristics of day-side cusp aurora are still unknown. It is instructive to compare particle flux and optical luminosity because these two quantities should be proportional if the cusp aurora is caused by electron impact, as has been found for nighttime aurora in the oval. Furthermore, there should then be a direct relation between auroral altitudes and particle energy. Based on coordinated auroral observations at Svalbard and Greenland, together with simultaneous, overhead F-9 satellite measurements, these quantities have been evaluated     

A Note about the Appearance of Non-Hyperbolic Solutions in a Mechanical Pendulum System

The investigation of the behavior of a nonlinear system consists in theanalysis of different stages of its motion, where the complexity varieswith the proximity of a resonance region. Near this region the stabilitydomain of the system undergoes sudden changes due basically tocompetition and interaction between periodic and saddle solutions insidethe phase portrait, leading to the occurrence of the most differentphenomena. Depending of the domain of the chosen control parameter,these events can reveal interesting geometric features of the system sothat the phase portrait is not capable to express all them, since theprojection of these solutions on the two-dimensional surface can hidesome aspects of these events. In this work we will investigate thenumerical solutions of a particular pendulum system close to a secondaryresonance region, where we vary the control parameter in a restrictdomain in order to draw a preliminary identification about what happenswith this system. This domain includes the appearance of non-hyperbolicsolutions where the basin of attraction in the center of the phaseportrait diminishes considerably, almost disappearing, and afterwardsits size increases with the direction of motion inverted. Thisphenomenon delimits a boundary between low and high frequency of theexternal excitation.     

Analysis of some combination-overtone infrared bands of SO3

Several new infrared absorption bands for ³²S¹⁶O₃ have been measured and analyzed. The principal bands observed were ν₁+ν₂ (at 1561 cm⁻¹), ν₁+ν₄ (at 1594 cm⁻¹), ν₃+ν₄ (at 1918 cm⁻¹), and 3ν₃ (at 4136 cm⁻¹). Except for 3ν₃, these bands are very complicated because of (a) the Coriolis coupling between ν₂ and ν₄, (b) the Fermi resonance between ν₁ and 2ν₄, (c) the Fermi resonance between ν₁ and 2ν₂, (d) ordinary l-type resonance that couples levels that differ by 2 in both the k and l quantum numbers, and (e) the vibrational l-type resonance between the A₁^′ and A₂^′ levels of ν₃+ν₄. The unraveling of the complex pattern of these bands was facilitated by a systematic approach to the understanding of the various interactions. Fortunately, previous work on the fundamentals permitted good estimates of many constants necessary to begin the assignments and the fit of the measurements. In addition, the use of hot band transitions accompanying the ν₃ band was an essential aid in fitting the ν₃+ν₄ transitions since these could be directly observed for only one of four interacting states. From the hot band analysis we find that the A₁^′ vibrational level is 3.50 cm⁻¹ above the A₂^′ level, i.e., r₃₄=1.75236(7) cm⁻¹. In the case of the 3ν₃ band, the spectral analysis is straightforward and a weak Δk=±2, Δl₃=±2 interaction between the l₃=1 and l₃=3 substates locates the latter A₁^′ and A₂^′ “ghost” states 22.55(4) cm⁻¹ higher than the infrared accessible l₃=1 E^′ state.     

Results of radius scaling experiments and analysis of neon K-shellradiation data from an inductively driven Z-pinch

The K-shell radiated energy (yield) from neon Z-pinch implosions with annular, gas-puff nozzle radii of 1, 1.75, and 2.5 cm was measured for implosion times from 50 to 300 ns while systematically keeping the implosion kinetic energy nearly constant. The implosions were driven by the Hawk inductive-storage generator at the 0.65-MA level. Initial neutral-neon density distributions from the nozzles were determined with laser interferometry. Measured yields are compared with predictions from zero-dimensional (0-D) scaling models of ideal. One-dimensional (1-D) pinch behavior to both benchmark the scaling models, and to determine their utility for predicting K-shell yields for argon implosions of 200 to >300 ns driven by corresponding currents of 4 to 9 MA, such as envisioned for the DECADE QUAD. For all three nozzles, the 0-D models correctly predict the Z-pinch mass for maximum yield. For the 1and 1.75-cm radius nozzles, the scaling models accurately match the measured yields if the ratio of initial to final radius (compression ratio) is assumed to be 8:1. For the 2.5-cm radius nozzle, the measured yields are only one-third of the predictions. Analysis of K-shell spectral measurements suggest that as much as 70% (50%) of the imploded mass is radiating in the K-shell for the 1-cm (1.75-cm) radius nozzle. That fraction is only 10% for the 2.5-cm radius nozzle. The 0-D scaling models are useful for predicting 1-D-like K-shell radiation yields (better than a factor-of-two accuracy) when a nominal (≈10:1) compression ratio is assumed. However, the compression ratio assumed in the models is only an “effective” quantity, so that further interpretations based on the 0-D analysis require additional justification. The lower-than-predicted yield for the 2.5-cm radius nozzle is associated with larger radius and not with longer implosion time, and is probably a result of two-dimensional effects