Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

Monitoring photopolymerization reactions with optical pyrometry

This article describes the development of optical pyrometry (OP) as a new analytical technique for the continuous monitoring of the progress of both free‐radical and cationic photopolymerizations. The method is rapid, reproducible, and very easy to implement. A temperature profile of a photopolymerization can be obtained. Preliminary studies have shown that the temperatures of some polymerizing monomers can easily reach temperatures in excess of 250 °C. The effects of the mass and reactivity of the monomer, light intensity, structures, and concentrations of the photoinitiators and monomers as well as the presence or absence of oxygen on various free‐radical and cationic photopolymerizations were examined with this method. Coupling of real‐time infrared spectroscopy with OP provides a convenient method for simultaneously monitoring both the chemical conversion and the temperature of a photopolymerization. This combined technique affords new insights into the effects of temperature‐induced autoacceleration on the course of photopolymerizations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 579–596, 2003     

Time-dependent pump-probe spectra of NeBr2

Time- and frequency-resolved pump-probe measurements on NeBr2 have been performed to better characterize its fragmentation dynamics on the B electronic state for vibrational levels in the energy region of the transition from direct vibrational predissociation to intramolecular vibrational relaxation dynamics. Above nu'=20 of the Br2 stretching mode, it was observed that the dependence of lifetime on the vibrational quantum number deviates from the energy-gap law by leveling off in the range of 10 psE transitions of the complex. These transitions are shifted 20 cm(-1) to lower energy from the free Br2 resonances, indicating an E state Ne-Br2 bond energy of 82 cm(-1). Measurements of NeBr2 vibrational predissociation via the delta nu=-2 channel were also performed for nu'=27, 28, and 29. The closing of the delta nu=-1 channel leads to an increase in the lifetimes of these vibrational levels. A new Nd:yttrium aluminum garnet pumped dual optical parametric oscillator/optical parametric amplifier system is described that allows us to conveniently record time-delayed pump-probe spectra with 2-cm(-1) spectral resolution and 15-ps time resolution.     

Novel methyl helianthrones as photosensitizers: synthesis and biological evaluation

A combination of light, oxygen and a photosensitizer is used to induce death of cancer cells by photodynamic therapy. In this study, we have synthesized several new methyl helianthrone derivatives and compared their phototoxicity with that of hypericin. In contrast to hypericin, methyl helianthrones are soluble in aqueous solutions and have a broad range of light absorbance, which allows the use of polychromatic light. Structural modifications of methyl helianthrone demonstrated that substitution of hydrogen atoms of methyl helianthrone at Positions 2 and 5 with Br atoms or methylation of its phenolic hydroxyls, significantly increases the corresponding singlet oxygen quantum yield and their phototoxicity toward alphaT3-1, M2R and LNCaP cells. The phototoxicity of some of these compounds was similar to that of hypericin. Methyl helianthrones, like hypericin, accumulated mainly in the perinuclear region as evident by confocal microscopy. Irradiation of cells pretreated with methyl helianthrone derivatives generates intracellular reactive oxygen species and lipid free radicals, as shown by a fluorescentic probe and electron paramagnetic resonance methods, respectively. The phototoxicity of these methyl helianthrones as well as their ability to oxidize membrane lipids were significantly decreased on addition of specific Type-II inhibitors, suggesting the involvement of singlet oxygen as the main oxidant.     

Self-selection in olefin cross-metathesis: the effect of remote functionality

Olefin cross-metathesis (CM) is potentially an attractive method for generating dynamic combinatorial libraries (DCLs). In order for the CM reaction to be useful for DCL production, the course of the reaction and product distribution must be relatively insensitive to functionality remote from the reacting centers. We report on the CM of a series of allyl- and homoallylamides that are strongly dependent on remote functionality. This includes an unusual example of a cis-selective CM. [Reaction: see text]     

Mixed thin films of a cationic amphiphilic porphyrin and n-alkanes

Langmuir and Langmuir-Blodgett (LB) films of a cationic amphiphilic porphyrin mixed with n-alkanes octadecane and hexatriacontane were prepared and characterized, to examine the influence of the alkanes on film structure and stability. While the structure present in these films was controlled primarily by the porphyrin, the addition of the alkanes resulted in significant changes to both the phase behavior of the Langmuir films and the molecular arrangement of the LB films. These changes, as well as the observed chain length effects, are explained in terms of the intermolecular interactions present in the films.     

Jahn-Teller-like progressions in the absence and presence of Jahn-Teller distortions

Prominent progressions of non-totally symmetric modes may ensue in non-linear molecules in electronic transitions involving degenerate states in the absence of Jahn-Teller distortions. In the presence of Jahn-Teller interactions prominent non-Jahn-Teller progressions may result.     

A molecular-dynamics study of a model S(N)1 dissociation reaction at the water liquid/vapor interface

The thermodynamics and dynamics of a model S(N)1 reaction: t-BuCl --> t-Bu+ + Cl- is studied at the water liquid/vapor interface using molecular-dynamics computer simulations. The empirical valence bond approach is used to couple two diabatic states, covalent and ionic, in the electronically adiabatic limit. Umbrella sampling calculations are used to calculate the potential of mean force along the reaction coordinate (defined as the t-Bu to Cl distance) in bulk water and in several locations at the interface. We find a significant increase of the dissociation barrier height and of the reaction free energy at the interface relative to the bulk. This is shown to be due to the reduced polarity of the interface. Reactive flux correlation function calculations show significant deviation of the rate constant from the transition-state theory: The transmission coefficients range from 0.49 in the bulk to 0.05 above the Gibbs surface. The low transmission coefficient at the interface despite the lower friction is shown to be due to slow vibrational relaxation.     

Phosphazene-based ionic liquids: synthesis, temperature-dependent viscosity, and effect as additives in water lubrication of silicon nitride ceramics

Phosphazene rings with (dimethylamino)ethoxy (1, 2), pyridylmethoxy (3), or (dimethylamino)propoxy (4) chains were synthesized and quaternized at the substitutent nitrogen by treatment with methyl iodide at 35 degrees C over 3-6 h to give polyiodo salts, 5-8. Subsequent metathesis with LiN(SO(2)CF(3))(2) or NaBF(4) gave the respective ionic salts, 9-13. The amide salts, 9-12, were viscous liquids with pour points at 55-100 degrees C, and the tetrafluoroborate salt, 13, was a solid, mp 168 degrees C. The compositions of 2 and 5-13 were confirmed by elemental analysis and spectroscopic methods. Compounds 1, 2, and 4 were viscous liquids (d(25) = 1.67 g cm(-3); eta(25) = 0.76-1.56 mPa s(-1) ) with pour points at approximately 15 degrees C. The solid polyquaternary salts, 5-8, melted at 130-194 degrees C. The ionic liquids, 9-12, had an average density of approximately 1.73 g cm(-3) at 25 degrees C, and viscosities (25 degrees C) ranged between 68.3 and 139.2 mPa s(-1). A plot of the viscosities of 9-12 vs temperature revealed an almost linear correlation between 55 and 120 degrees C. Friction and wear properties of water with 0.25 wt % of 9-12 as boundary lubricant additives were evaluated on Si(3)N(4)/Si(3)N(4) ceramic interfaces. The most significant observation is that they caused a decrease in the running-in period.