Ultra-sensitive high-precision spectroscopy of a fast molecular ion beam

Direct spectroscopy of a fast molecular ion beam offers many advantages over competing techniques, including the generality of the approach to any molecular ion, the complete elimination of spectral confusion due to neutral molecules, and the mass identification of individual spectral lines. The major challenge is the intrinsic weakness of absorption or dispersion signals resulting from the relatively low number density of ions in the beam. Direct spectroscopy of an ion beam was pioneered by Saykally and co-workers in the late 1980s, but has not been attempted since that time. Here, we present the design and construction of an ion beam spectrometer with several improvements over the Saykally design. The ion beam and its characterization have been improved by adopting recent advances in electrostatic optics, along with a time-of-flight mass spectrometer that can be used simultaneously with optical spectroscopy. As a proof of concept, a noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) setup with a noise equivalent absorption of ~2 × 10(-11) cm(-1) Hz(-1/2) has been used to observe several transitions of the Meinel 1-0 band of N(2) (+) with linewidths of ~120 MHz. An optical frequency comb has been used for absolute frequency calibration of transition frequencies to within ~8 MHz. This work represents the first direct spectroscopy of an electronic transition in an ion beam, and also represents a major step toward the development of routine infrared spectroscopy of rotationally cooled molecular ions.     

New structures in the bi­pyridine–copper(II) nitrate–methanol system: [(bpy)2Cu(NO3)]NO3·CH3OH and [(bpy)2Cu(NO3)]NO3

Reaction of 2,2′‐bi­pyridine (bpy) and copper(II) nitrate in methanol results in two complexes, namely light‐blue bis(2,2′‐bi­pyridine)­nitrato­copper(II) nitrate methanol solvate, [Cu(NO₃)(C₁₀H₈N₂)₂]NO₃·CH₃OH, (I), which is unstable in air, and the product of its decomposition, catena‐poly­[[[bis(2,2′‐bi­pyridine)copper(II)]‐μ‐nitrato‐O:O′] nitrate], {[Cu(NO₃)(C₁₀H₈N₂)₂]NO₃}_n, (II). The crystal structures of both compounds were determined from one crystal at room temperature. Later, the structure of (I) was redetermined at low temperature. In (I) and (II), the Cu atom is coordinated by two bpy and one or two nitrate ions, respectively. The second nitrate ion in (I), along with the methanol solvent mol­ecule, is found in the outer coordination sphere, not bonded to Cu. The nitrate in (I) is chelating, while in (II), it bridges (bpy)₂Cu complexes, forming a one‐dimensional chain structure. The Cu cation in (II) lies on a twofold axis and the uncoordinated NO₃^? ion is located close to a twofold axis and is therefore disordered. Compound (I) converts into (II) upon loss of solvent.     

Capillary electrochromatography of peptides on microfabricated poly(dimethylsiloxane) chips modified by cerium(IV)-catalyzed polymerization

Ceramides are important intracellular second messengers that play a role in the regulation of cell growth, differentiation and programmed cell death. Qualitative and quantitative analysis of these second messengers requires sensitive and specific analytical methods to detect endogenous levels of individual ceramide species and to differentiate between them. Nine synthetic ceramides were separated by liquid chromatography coupled to tandem mass spectrometry on a C18 bonded silica column. The lipids were eluted in gradient elution mode using a mixture of water, acetonitrile and 2-propanol as mobile phase. They were detected by reaction monitoring performed on positive ion electrospray generated ions. Collision-induced fragmentations conducted on ceramides produced a well characteristic product ion at m/z 264, making multiple reaction monitoring (MRM) well suited for various ceramides quantitative measurements. After optimization of the extraction step, the proposed methodology was able to identify and quantify different ceramide species issued from human cancer cells. The method could be validated for C16, C18 and C20 ceramides, quantified at the nanogram level. The validation exhibits good results with respect to linearity, accuracy and precision.     

Phytochromes with noncovalently bound chromophores: the ability of apophytochromes to direct tetrapyrrole photoisomerization

Chromophore-apoprotein interactions were studied with recombinant apoproteins, oat phytochrome (phyA) and CphB of the cyanobacterium Calothrix PCC7601, which were both incubated with the bilin compounds biliverdin (BV) IXalpha, phycocyanobilin (PCB) and the 3'-methoxy derivative of PCB. Previously it was shown that CphB and its homolog in Calothrix, CphA, show strong sequence similarities with each other and with the phytochromes of higher and lower plants, despite the fact that CphB carries a leucine instead of a cysteine at the chromophore attachment position and thus holds the chromophore only noncovalently. CphA binds tetrapyrrole chromophores in a covalent, phytochrome-like manner. For both eyanobacterial phytochromes, red and far-red light-induced photochemistry has been reported. Thus, the role of the binding site of CphB in directing the photochemistry of noncovalently bound tetrapyrroles was analyzed in comparison with the apoprotein from phyA phytochrome. Both the aforementioned compounds, which were used as chromophores, are not able to form covalent bonds with a phytochrome-type apoprotein because of their chemical structure (vinyl group at position 3 or methoxy group at position 3'). The BV adducts of both apoproteins showed phytochrome-like photochemistry (formation of red and far-red-absorbing forms of phytochrome [P(r) and P(fr) forms]). However, incubation of the oat apophytochrome with BV primarily yields a 700 nm form from which the P(r)-P(fr) photochemistry can be initiated and to which the system relaxes in the dark after illumination. The results for CphB were compared with a CphB mutant where the chromophore-binding cysteine had been introduced, which, upon incubation with PCB, shows spectral properties nearly identical with its (covalently binding) CphA homolog. A comparison of the spectral properties (P(r) and P(fr) forms) of all the PCB- and BV-containing chromoproteins reveals that the binding site of the cyanobacterial apoprotein is better suited than the plant (oat) phytochrome to noncovalently incorporate the chromophore and to regulate its photochemistry. Our findings support the proposal that the recently identified phytochrome-like prokaryotic photoreceptors, which do not contain a covalently bound chromophore, may trigger a light-induced physiological response.     

Free radical-mediated vinyl amination: access to N,N-dialkyl enamines and their beta-stannyl and beta-thio derivatives

[reaction: see text] The first examples of free radical-mediated vinyl amination are described by nonconventional vinyl radical addition to azomethine nitrogen. This new vinyl amination protocol is mild and provides convenient synthetic access to nonstabilized N,N-dialkyl enamines and tandem bond-forming processes.     

HostDesigner: a program for the de novo structure-based design of molecular receptors with binding sites that complement metal ion guests

This paper describes a novel approach to the discovery of host structures with binding sites that complement targeted metal ion guests. This approach uses a de novo structure-based design strategy that couples molecular building algorithms with scoring functions to prioritize candidate structures. The algorithms described herein have been implemented in a program called HostDesigner, the first structure-based design software specifically created for the discovery of metal ion receptors. HostDesigner generates and evaluates millions of candidate structures within minutes, rapidly identifying three-dimensional architectures that position binding sites to provide an optimal interaction with the metal ion.     

Chemically modified "polar patch" mutants of subtilisin in peptide synthesis with remarkably broad substrate acceptance: designing combinatorial biocatalysts

A significant enhancement of the applicability of the serine protease subtilisin Bacillus lentus (SBL) in peptide synthesis was achieved by using the strategy of combined site-directed mutagenesis and chemical modification to create chemically modified mutant (CMM) enzymes. The introduction of polar and/or homochiral auxiliary substituents, such as X=oxazolidinones, alkylammonium groups, and carbohydrates at position 166 at the base of the primary specificity S(1) pocket created SBL CMMs S166C-S-X with strikingly broad structural substrate specificities. These CMMs are capable of catalyzing the coupling reactions of not only L-amino acid esters but also D-amino acid esters as acyl donors with glycinamide to give the corresponding dipeptides in good yields. These powerful enzymes are also applicable to the coupling of L-amino acid acyl donors with alpha-branched acyl acceptor, L-alaninamide. Typical increases in isolated yields of dipeptides of 60-80 % over SBL-WT (e.g. 0 % yield of Z-D-Glu-GlyNH(2) using SBL-WT-->74 % using S166C-S-(CH(2))(2) NMe(3) (+)) demonstrate the remarkable synthetic utility of this "polar patch" strategy. Such wide-ranging systems displaying broadened and therefore similarly high, balanced yields of products (e.g. 91 % Z-L-Ala-GlyNH(2) and 86 % yield of Z-D-Ala-GlyNH(2) using S166C-S-(3R,4S)-indenooxazolidinone) may now allow the use of biocatalysts in parallel library synthesis.