Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.     

Synthesis,crystal structure and luminescent property of a novel H<Subscript>2</Subscript>O-bridged cobalt(II) polymer with one-dimensional chain structure

The coordination compound [Co(C₁₀H₇COO)₂(H₂O)₃]_2n · 4nH₂O was prepared by the reaction of 1-naphthoic acid and cobalt(II) acetate tetrahydrate in basic solution, and was fully characterized by X-ray diffraction, element analysis, FTIR, TG-DTA and luminescent spectra. In the crystal the six-coordinated Co(II) centers are linked into one-dimensional zigzag chains by water molecules, which are further assembled into a two-dimensional network through weak inter-chain C–H···π interactions. The solid complex exhibits favorable fluorescent properties similar to those of free ligand at room temperature, which can be assigned to the intraligand electronic transfer.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

A molecular-dynamics study of a model S(N)1 dissociation reaction at the water liquid/vapor interface

The thermodynamics and dynamics of a model S(N)1 reaction: t-BuCl --> t-Bu+ + Cl- is studied at the water liquid/vapor interface using molecular-dynamics computer simulations. The empirical valence bond approach is used to couple two diabatic states, covalent and ionic, in the electronically adiabatic limit. Umbrella sampling calculations are used to calculate the potential of mean force along the reaction coordinate (defined as the t-Bu to Cl distance) in bulk water and in several locations at the interface. We find a significant increase of the dissociation barrier height and of the reaction free energy at the interface relative to the bulk. This is shown to be due to the reduced polarity of the interface. Reactive flux correlation function calculations show significant deviation of the rate constant from the transition-state theory: The transmission coefficients range from 0.49 in the bulk to 0.05 above the Gibbs surface. The low transmission coefficient at the interface despite the lower friction is shown to be due to slow vibrational relaxation.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Experiments in Solving Mixed Integer Programming Problems on a Small Array of Transputers

The time-consuming process of solving large-scale Mixed Integer Programming problems using the branch-and-bound technique can be speeded up by introducing a degree of parallelism into the basic algorithm. This paper describes the development and implementation of a parallel branch-and-bound algorithm created by adapting a commercial MIP solver. Inherent in the design of this software are certain ad hoc methods, the use of which are necessary in the effective solution of real problems. The extent to which these ad hoc methods can successfully be transferred to a parallel environment, in this case an array of at most nine transputers, is discussed. Computational results on a variety of real integer programming problems are reported.     

Phosphazene-based ionic liquids: synthesis, temperature-dependent viscosity, and effect as additives in water lubrication of silicon nitride ceramics

Phosphazene rings with (dimethylamino)ethoxy (1, 2), pyridylmethoxy (3), or (dimethylamino)propoxy (4) chains were synthesized and quaternized at the substitutent nitrogen by treatment with methyl iodide at 35 degrees C over 3-6 h to give polyiodo salts, 5-8. Subsequent metathesis with LiN(SO(2)CF(3))(2) or NaBF(4) gave the respective ionic salts, 9-13. The amide salts, 9-12, were viscous liquids with pour points at 55-100 degrees C, and the tetrafluoroborate salt, 13, was a solid, mp 168 degrees C. The compositions of 2 and 5-13 were confirmed by elemental analysis and spectroscopic methods. Compounds 1, 2, and 4 were viscous liquids (d(25) = 1.67 g cm(-3); eta(25) = 0.76-1.56 mPa s(-1) ) with pour points at approximately 15 degrees C. The solid polyquaternary salts, 5-8, melted at 130-194 degrees C. The ionic liquids, 9-12, had an average density of approximately 1.73 g cm(-3) at 25 degrees C, and viscosities (25 degrees C) ranged between 68.3 and 139.2 mPa s(-1). A plot of the viscosities of 9-12 vs temperature revealed an almost linear correlation between 55 and 120 degrees C. Friction and wear properties of water with 0.25 wt % of 9-12 as boundary lubricant additives were evaluated on Si(3)N(4)/Si(3)N(4) ceramic interfaces. The most significant observation is that they caused a decrease in the running-in period.     

Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.     

Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.