DFT and MP2 Calculations on Tautomers and Water-Assisted Proton Transfer on 1,2,5-Oxadiazol-4,3-diamine

In this work a detailed quantum-chemical comparison of the relative stability of six tautomers of 1,2,5-oxadiazol-4,3-diamine studied in the gas phase and solution. Theoretical calculations are carried out by the density functional theory (DFT/B3LYP) and MP2 methods using the standard 311++G(d,p) basis set. The results indicate that A is the most stable form in the gas phase and also is the predominant tautomer in solution at the DFT and MP2 methods. The transition states of proton transfer reaction are calculated. The variation of dipole moments and charges on atoms are studied in various solvent. Specific solvent effects with addition of one water molecule near the electrophilic centers of tautomer investigated. Also the transition state of proton transfer assisted by a water molecule was investigated.     

Selective voltammetric detection of dopamine in the presence of ascorbate

The selective detection of dopamine in the presence of ascorbate is demonstrated based on the voltammetry of dopamine transfer across the interface between two immiscible electrolyte solutions (ITIES) facilitated by an organic-phase ionophore; ascorbate transfer does not occur, leading to highly selective detection of dopamine in the presence of excess ascorbate.     

Synthesis of Some Novel Thioxanthenone‐Fused Azacrown Ethers,and Their Use as New Catalysts in the Efficient,Mild, and Regioselective Conversion of Epoxides to β‐Hydroxy Thiocyanates with Ammonium Thiocyanate

The regioselective ring‐opening reactions of some epoxides with ammonium thiocyanate in the presence of a series of new 9H‐thioxanthen‐9‐one‐fused azacrown ethers, i.e., 7 – 11 (Scheme 1), and also of dibenzo[18]crown‐6 ( 12 ), Kryptofix^® 22 ( 13 ), and benzo[15]crown‐5 ( 14 ) were studied (Tables 1 and 2). The epoxides were subjected to cleavage by NH₄SCN in the presence of these catalysts under mild conditions in various aprotic solvents. Reagents and conditions were identified for the synthesis of individual β‐hydroxy thiocyanates in high yield and with more than 90% regioselectivity. The results can be discussed in terms of a four‐step mechanism (Scheme 2): 1) formation of a complex between catalyst and NH₄SCN, 2) release of SCN^? from the complex, 3) reaction of the released SCN^? at the sterically less hindered site of the epoxide, and 4) regeneration of the catalyst. The major advantages of this method are the high regioselectivity, the simple regeneration of the catalyst, the reuse of it through several cycles without a decrease of activity, and the ease of workup of the reaction mixtures.     

Methylene blue as an electrochemical indicator for DF508 cystic fibrosis mutation detection

Cystic fibrosis is one of the most common life-shortening, childhood-onset inherited diseases. Among the 1,000 known cystic fibrosis-related mutations, DF508 is the most common, with a frequency varying between 50% and 70% according to geographical areas and population typology. In this work, we report the use of methylene blue as an electrochemical reporting agent in the discrimination of synthetic PCR analogue of the DF508 cystic fibrosis mutation (Mut) from the wild type (Wt). At optimum experimental condition, a discrimination factor between mutant and wild type of approximately 1.5-fold was found. The proposed assay was quantitative and linear in the range of 10–100 nM, exhibiting a limit of detection of 2.64 nM. Electrochemical studies at variable ionic strength conditions allowed further elucidation of the mechanism of the methylene blue (MB)–DNA interaction. To the best of our knowledge, this is the first report of detection of hybridisation solely via guanine-specific MB–DNA interaction simultaneously in MB solution, independent of electrostatic interaction as demonstrated in the ionic strength study. The introduction of formamide in the hybridization buffer, to improve discrimination, was also investigated. Finally, mutant wild type discrimination was demonstrated, at 10 nM concentration, with the use of a multi-sensor setup.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Multidimensional analysis of denatured milk proteins by hydrophobic interaction chromatography coupled to a dynamic surface tension detector

Multidimensional analysis of denatured milk proteins is reported using high-performance liquid chromatography (HPLC) combined with dynamic surface tension detection (DSTD). A hydrophobic interaction chromatography (HIC) column (a TSK-Gel Phenyl-5PW column, TosoBiosep), in the presence of 3.0 M guanidine hydrochloride (GdmHCl) as denaturing agent is employed as the mobile phase. Dynamic surface tension is measured through the differential pressure across the liquid-air interface of repeatedly growing and detaching drops. Continuous surface tension measurement throughout the entire drop growth (50 ms to 4 s) is achieved, for each eluting drop of 4 s length, providing insight into both the kinetic and thermodynamic behavior of molecular orientation processes at the liquid-air interface. An automated calibration procedure and data analysis method is applied with the DSTD system, which allows two unique solvents to be used, the HIC mobile phase for the sample and a second solvent (water for example) for the standard, permitting real-time dynamic surface tension data to be obtained. Three-dimensional data is obtained, with surface tension as a function of drop time first converted to surface pressure, which is plotted as a function of the chromatographic elution time axis. Experiments were initially performed using flow injection analysis (FIA) with the DSTD system for investigating commercial single standard milk proteins (alpha-lactalbumin, beta-lactoglobulin, alpha-, beta-, kappa-casein and a casein mixture) denatured by GdmHCl. These FIA-DSTD experiments allowed the separation and detection conditions to be optimized for the HIC-DSTD experiments. Thus, the HIC-DSTD system has been optimized and successfully applied to the selective analysis of surface-active casein fractions (alpha s1- and beta-casein) in a commercial casein mixture, raw milk samples (cow's, ewe's and goat's milk) and other diary products (yogurt, stracchino, mozzarella, parmesan cheese and chocolate cream). The different samples were readily distinguished based upon the selectivity provided by the HIC-DSTD method. The selectivity advantage of using DSTD relative to absorbance detection is also demonstrated.     

Designed Novel Carbazole Based Electrolyte Additive for Overcharge Protection of Lithium‑Ion Batteries

Russian Journal of Electrochemistry - 9-Phenyl-9H-carbazole (9P9HC) organic monomer which contains phenyl moiety used as new overcharge protection additive in electrolyte of LiFePO4 based...     

Stripping voltammetry at micro-interface arrays: A review

In this article, a comprehensive overview of the most recent developments in the field of stripping voltammetry at regular micro-interfaces (both solid–liquid and liquid–liquid interfaces) is presented. This review will report on the most conventional arrays of metallic micro-electrodes but also on the rapidly growing field of electrochemistry at arrays of micro-interfaces between two immiscible electrolyte solutions (μITIES). The main fabrication methods, together with some design considerations and diffusion phenomena at such interfaces are discussed. Main applications of micro-interface arrays are presented including heavy metals detection at micro-electrode arrays and detection of organic molecules (amino acids, vitamins, peptides and drugs) at the μITIES. Stripping analysis at micro-interface arrays is suitable for the detection of analytes in several real media including water, soil extracts and biological fluids (blood and saliva) with high specificity, sensitivity (detection limits of nM, ppb level) and reliability. Stripping analysis at μITIES and micro-electrode arrays are two complementary approaches that have the advantages of being cost effective, simple to use and easily adaptable to field measurement.     

Gas‐Phase Synthesis of 1‐Silacyclopenta‐2,4‐diene

Silole (1‐silacyclopenta‐2,4‐diene) was synthesized for the first time by the bimolecular reaction of the simplest silicon‐bearing radical, silylidyne (SiH), with 1,3‐butadiene (C₄H₆) in the gas phase under single‐collision conditions. The absence of consecutive collisions of the primary reaction product prevents successive reactions of the silole by Diels–Alder dimerization, thus enabling the clean gas‐phase synthesis of this hitherto elusive cyclic species from acyclic precursors in a single‐collision event. Our method opens up a versatile and unconventional path to access a previously rather obscure class of organosilicon molecules (substituted siloles), which have been difficult to access through classical synthetic methods.