Enzyme thermistors for process monitoring and control

In today’s biotechnology there is an increasing demand for appropriate analytical systems for process control. At present the most widely used control systems are based on measurements of pH, pO₂, and pCO₂. Such systems do not allow the direct measurement of substrates and products. To overcome this drawback sensors such as enzyme thermistors and enzyme electrodes have been designed and their development into industrial useful sensors for monitoring and controlling is the subject of active research.     

Synthesis of [11C]/(13C)amines via carbonylation followed by reductive amination

Twelve 11C-labelled amines were prepared via 11C-carbonylation followed by reductive amination. The 11C-carbonylation was performed in the presence of tetrakis(triphenylphosphine)palladium using aryl iodides or aryl triflates, [11C]carbon monoxide and phenyl-/methylboronic acid. The [11C]ketones formed in this step were then transformed directly into amines by reductive amination using different amines in the presence of TiCl4 and NaBH3CN. The 11C-labelled amines were obtained with decay-corrected radiochemical yields in the range 2-78%. The radiochemical purity of the isolated products exceeded 98%. (13C)Benzhydryl-phenyl-amine was synthesised and analysed by NMR spectroscopy for confirmation of the labelling position. Specific radioactivity was determined for the same compound. The reference compounds were prepared by reductive amination of ketones using conventional reaction conditions and three of the compounds were novel. The presented approach is a new method for the synthesis of [11C]/(13C)amines.     

Rapid Fluorometric Screening of Antibiotics in Seafood

Simple and rapid fluorometric screening methods have been developed based on the competitive binding between the target and an intercalating fluorophore dye to double-stranded-DNA (dsDNA). In this study, the long-wavelength fluorescente dye TOTO-3 was employed as the indicator. Compounds that interact with dsDNA will affect the binding of TOTO-3 to the nucleic acid thereby changing the fluorescence intensity. The analyte concentration is indirectly determined by the decrease in fluorescence intensity. A fiber optic fluorescence screening system was developed for rapid and convenient sample processing. Lambda DNA (48.5 kb) was chosen as a suitable sensing nucleic acid material. Detection of sulfathiazole and chloramphenicol in shrimps using this method was studied in the range of 0.5–25 ng mL⁻¹ of sulfathiazole and of 1–50 ng mL⁻¹ of chloramphenicol. Detection limits of 0.5 ng mL⁻¹ of sulfathiazole and 1 ng mL⁻¹ of chloramphenicol were achieved. This approach is useful as a routine test in the monitoring of antibiotics in the environment or aquaculture products. The easy operation and the rapid and sensitive detection make this a potential high-throughput screening method.     

(11)C] Carbon monoxide in selenium-mediated synthesis of (11)C-carbamoyl compounds

Using either amines, amino alcohols, or alcohols in selenium-mediated synthesis with [(11)C]carbon monoxide, 3 ureas, 6 carbamates, and 1 carbonate were labeled. Tetrabutylammonium fluoride ((TBA)F) was discovered to form a soluble and reactive complex with selenium and drastically increase the radiochemical yields. Of the selected carbamoyl compounds, one was a receptor ligand, one was an enzyme inhibitor, and one was a muscular relaxant pharmaceutical. The (11)C-target compounds were obtained in radiochemical yields ranging from low to almost quantitative and with specific radioactivity up to 1300 GBq/micromol. The radiochemical purity of the final products exceeded 98%. In one case, the corresponding (13)C-substituted compound was produced to verify the position of the (11)C-label. In a typical experiment starting with 16.4 GBq [(11)C]carbon monoxide, 7.0 GBq of LC-purified 5-phenyl-1,3-oxazolidin-[2-(11)C]-2-one was obtained within 20 min from start of the carbonylation reaction (84% decay-corrected radiochemical yield). The presented approach is an interesting alternative to the use of [(11)C]phosgene in labeling chemistry.     

Photo-degradation and photo-stabilisation of the two-phase system poly(vinyl chloride)-polybutadiene

The photo-oxidative degradation of poly(vinyl chloride) (PVC)/polybutadiene (PB) blends has been studied. After uv irradiation, photo-grafting of the PVC and PB phases was observed. Photolysis of PVC accelerates cis-trans isomerisation of PB. Both phases, PVC and PB, are photo-degraded according to free radical oxidation mechanisms. The rates of these processes can be decreased by the addition of metal chelates, such as commercially produced Cyasorb uv light absorber 1084 (2,2′-thiobis(4-t-octylphenolato)-n-butylamine nickel(II)) and Cyasorb uv light absorber 2548 (cobalt dicyclohexyldithiophosphinate).     

Melt-photografting polymerization of maleic anhydride onto LDPE film

Maleic anhydride (MAH) was photografted onto low density polyethylene substrates at temperatures above the melting point of MAH. The effects of some principal factors including irradiation temperature, photoinitiators, the intensity of UV radiation, and the far UV radiation on the grafting polymerization were investigated in detail. Percent conversion and grafting efficiency of the polymerizations were determined by the gravimetric method. The contact angles of the grafted film PE-g-PMAH against water and the FTIR spectrum of the grafted film were measured as characterization. The results show that the photografting polymerization of MAH can proceed smoothly at temperatures higher than the melting point of MAH; the far UV radiation and the intensity of the UV radiation affect the grafting polymerization greatly; the photoinitiators also have influence on the polymerization. According to the FTIR spectra, it is clearly confirmed that the grafted film samples contain anhydride groups. The contact angles demonstrate that the wettability of the grafted films is enhanced obviously, especially to those grafted film samples through hydrolysis.     

Radical-mediated carboxylation of alkyl iodides with [11C]carbon monoxide in solvent mixtures

[reaction: see text] [carboxyl-(11)C]Carboxylic acids were prepared from alkyl iodides via photoinitiated radical reactions using 10(-)(8) mol of [(11)C]carbon monoxide in binary and ternary homogeneous solvent mixtures. Short- (isobutyric), medium-, and long-chain saturated fatty acids (heptadecanoic) were labeled with isolated decay-corrected radiochemical yields ranging from 55% to 70% in 5-7-min reactions. The conversion of [(11)C]carbon monoxide to products reached 80-90%. To obtain good yields in the reactions performed in water-acetonitrile and water-THF mixtures, the addition of tetrabutylammonium hydroxide or potassium hydroxide was essential. The carboxylation was efficient for primary and secondary alkyl iodides. The carboxylation of tertiary iodides was feasible for 1-iodoadamantane but not for tert-butyl iodide. The dependence of the radiochemical yields on reaction time, photoirradiation conditions, and organic and inorganic additives was studied. The method provides a one-step route to [carboxyl-(11)C]carboxylic acids; traditional methods, in contrast, would require several steps. For example, using the devised reaction conditions, 3.19 GBq of purified [1-(11)C]1,10-decanedicarboxylic acid (specific radioactivity 188 GBq/mumol) was obtained within 35 min of the end of 10 muAh bombardment. (1-(13)C)4-Phenylbutyric acid was synthesized using ((13)C)carbon monoxide for identifying the labeling position with (1)H and (13)C NMR.     

Mass spectrometric investigation of isomeric 1,2,3,4-tetrahydro-4-oxoquinazolines

Six isomeric methylphenyl-1,2,3,4-tetrahydro-4-oxoquinazolines have been prepared and their fragmentation patterns upon electron impact studied. Deuterium labelling and high-resolution measurements were performed in order to facilitate the interpretation of the spectra. The dissociation of the molecular ion follows two main routes, the fragmentation being governed by the position of the phenyl group.     

Fettbestimmung in fettarmer Milch

Ohne Zusammenfassung