The preparation of 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides by the condensation/cyclization of trilithiated acetoacetanilides with lithiated methyl salicylates

Several acetoacetanilides were trilithiated in excess lithium diisopropylamide, and the resulting polylithiated intermediates were regioselectively condensed with lithiated methyl salicylates followed by acid cyclization to substituted 4-oxo-N-aryl-4H-1-benzopyran-2-acetamides (benzopyranone-2-acetamides).     

Expression ofAscaris suum malic enzyme in a mutantEscherichia coli allows production of succinic acid from glucose

Applied Biochemistry and Biotechnology - The malic enzyme gene ofAscaris suum was cloned into the vector pTRC99a in two forms encoding alternative arnino-termini. The resulting plasmids, pMEAl and...     

Collision-induced and infrared multiphoton dissociation studies on M(acetone)2 + (M=Al,Fe, Co,Cu, ScO) in the gas phase

In this paper we report an extension of our earlier study on the structure of Alfacetone)₂ ⁺ Collision-induced dissociation (CID) on MfacetoneXacetone-d₆)⁺ for M = Al, Fe, Co, and Cu yields primarily, if not exclusively, nearly equal amounts of acetone and acetone-d₆. Likewise, infrared multiphoton dissociation (IRMPD) at 10.6 μm yields, exclusively, nearly equal losses of the labeled and unlabeled acetones. These results suggest that the two acetone ligands bind in an equivalent fashion. Sc⁺ was also studied, which proved to be the most interesting. Sc⁺ reacts with acetone to form primarily ScO⁺, which undergoes higher order reactions leading to several products including ScO(acetone)₂ ⁺. IRMPD on this ion produces ScO(acetone-d₆)(CD₂CO)⁺, while its perdeuterated analog also produces ScO(acetone-d₆)⁺ in addition to ScO(acetone-d₆(CD₂CO)⁺. The IRMPD results are supplemented by studying the primary and higher order reactions of Sc⁺ with acetone, as well as the CID of ScO(acetone)₂ ⁺. Finally, a qualitative assessment of the infrared photodissociation cross sections is given. It is found that the relative photodissociation cross sections follow the orders Co(acetone-d₆)₂ ⁺ > Co(acetone)(acetone-d₆) > Co(acetone)₂ ⁺ and Co(acetone-d₆)⁺ > Co(acetone)⁺.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Fluoroquinolone Antimicrobials: Singlet Oxygen, Superoxide and Phototoxicity

The fluoroquinolone antibacterial agents possess photo-sensitizing properties that lead to phototoxic responses in both human and animal subjects. The phototoxicity order reported in humans is: fleroxacin > lomefloxacin, pefloxacin > ciprofloxacin ? enoxacin, norfloxacin and ofloxacin. Studies both in vivo and in vitro have related this phototoxicity to the generation of reactive oxygen species including hydrogen peroxide and the hydroxyl radical. We determined the quantum yields of singlet oxygen generation (φ_Δ,) by detection of the singlet oxygen (¹O₂) luminescence at 1270 tun for several fluoroquinolones, naphthyridines and other structurally related compounds. All the fluoroquinolones examined have low φ_Δ values ranging from 0.06 to 0.09 in phosphate buffer at pD 7.5. We also determined the ¹O₂ quenching constants for these compounds and their values were on the order of 10⁶M^?1 s¹, except for lomefloxacin whose rate constant was 1.8 × 10⁷M^?1 s^?1. The φ_Δ values were significantly decreased in a solvent of lower polarity such as methanol (0.007 ≤φ_Δ≤ 0.02). The production of ¹O₂ by these antibiotics did not correlate with the order reported for their phototoxicity. We also measured the photogeneration (λ > 300 nm) of superoxide by these antibacterials in dimethylsulfoxide using electron paramagnetic resonance and the spin trap 5,5-dimethyl-l-pyrroiine N-oxide. Although there is not a one-to-one correspondence between the relative rates of superoxide generation and the phototoxicity ranking of the fluoroquinolones, the more phototoxic compounds tended to produce superoxide at a faster rate. Nevertheless, the magnitudes of the observed differences do not appear sufficient to explain the range of fluoroquinolone phototoxicity potencies in human and animal subjects in general and the high activity of fleroxacin and lomefloxacin in particular. For these latter drugs the photoinduced loss of the F₈ atom as fluoride and the concomitant generation of a highly reactive carbene at C-8 provide a more plausible mechanism for their potent phototoxic and photocarcinogenic properties.     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

on the existence of organometallic palladium(IV) complexes

The reactions of palladium(II) compounds of the type Cl₂PdL₂ with bromobis(pentafluorophenyl)thallium(III) has been reexamined. The reported preparation of the organo palladium(IV) complex Cl₂Pd(C₆F₅)₂(PPh₃)₂ could not be repeated, and instead mixtures of binuclear palladium(II) compounds, Cl₂Pd(C₆F₅)₂L₂, and mononuclear palladium(II) compounds were obtained. The binuclear are transformed into the mononuclear complexes on addition of an excess of ligand L.The chlorine bridging atoms of the binuclear complexes can be replaced by other halogens or pseudohalogens by treatment with salts of the MX type (X = Br, I, SCN).     

Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.