A fast semi-automatic determination of 5–300 μg of sulphur in organic compounds

Summary A simple determination of sulphur in organic compounds is proposed. The sulphur is reduced to H₂S by H₂ over Pt at 900° C and this H₂S is automatically titrated with a Pb²⁺ solution. The end-point is detected by a specific sulphide electrode. The range of the method is from 5 to 300g of S with a standard deviation of 0.14% absolute or 0.7% relative; 45 or more determinations a day are possible.

---

Zusammenfassung Eine einfache automatische Schwefelbestimmung in organischen Substanzen img-Bereich wird vorgeschlagen. Im H₂-Strom wird der Schwefel über Pt bei 900° C reduziert. H₂S wird in einem mit KOH und NH₂OH beschickten Gefäß absorbiert und zugleich mit einer Blei(II)-Maßlösung titriert. Das Signal einer ionenspezifischen Sulfidelektrode wird zur Steuerung des Ganzen benützt. Die beschriebene Apparatur ermöglicht 45 Bestimmungen pro Tag. Die Standardabweichung liegt im Bereich von 5 bis 300g S bei etwa 0,14% abs. oder 0,7% rel.

     

Flow injection-mini-column technique with ICP-AES detection for the isolation and preconcentration of the fast reactive aluminium fraction in waters

A flow injection mini-column system based on short reaction times with 8-hydroxyquinoline (oxine) with ICP-AES detection is described for the isolation and preconcentration of the “fast reactive” or “toxic” aluminium fraction in water samples. Using a 3 s reaction time with oxine (5 × 10^–4 mol/l) at pH 5.0, the “fast reactive” aluminium fraction is shown not to include the non-toxic AlF²⁺ species at low F^–: Al³⁺ molar ratios (0.3 : 1). The complexed aluminium is isolated in a stable and recoverable form on mini-columns of Amberlite XAD-2 (0.3 cm × 5.0 cm, resin particle size range 0.08 mm–0.16 mm)). The retained aluminium is recovered by “back-flushing” the analytical column with 1 mol/l HCl for final element specific detection by ICP-AES. Detection limits (after preconcentration) of 2 μg/l, a linear range of 0–500 μg/l, and possible preconcentration factors of up to 18 times are demonstrated with the present system. Implications for the possible solution of sample stability problems encountered with labile aluminium species analysis and the development of a “field sampling” technique are discussed, where the desired Al fraction is quantitatively retained in a stable form on mini-columns.     

Experimental Determination of the Isotherm at 15°C of the System Mg2+/Cl?, SO42–H2O

 The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.     

Structural and process controls of AIEgens for NIR-II theranostics

Aggregation-induced emission (AIE) is a cutting-edge fluorescence technology, giving highly-efficient solid-state photoluminescence. Particularly, AIE luminogens (AIEgens) with emission in the range of second near-infrared window (NIR-II, 1000–1700 nm) have displayed salient advantages for biomedical imaging and therapy. However, the molecular design strategy and underlying mechanism for regulating the balance between fluorescence (radiative pathway) and photothermal effect (non-radiative pathway) in these narrow bandgap materials remain obscure. In this review, we outline the latest achievements in the molecular guidelines and photophysical process control for developing highly efficient NIR-II emitters or photothermal agents with aggregation-induced emission (AIE) attributes. We provide insights to optimize fluorescence efficiency by regulating multi-hierarchical structures from single molecules (flexibilization) to molecular aggregates (rigidification). We also discuss the crucial role of intramolecular motions in molecular aggregates for balancing the functions of fluorescence imaging and photothermal therapy. The superiority of the NIR-II region is demonstrated by fluorescence/photoacoustic imaging of blood vessels and the brain as well as photothermal ablation of the tumor. Finally, a summary of the challenges and perspectives of NIR-II AIEgens for in vivo theranostics is given.

Structural and process controls of NIR-II AIEgens realize manipulating of radiative (R) and nonradiative (NR) decay for precise theranostics.     

Limitations and perspectives in the determination of carbofuran with various liquid chromatography-mass spectrometry interfacing systems

Column liquid chromatography with mass spectrometric detection (LC-MS) has been widely accepted as the preferred technique for the identification and quantification of polar and thermally labile compounds at trace levels. Over the last decade many different types of LC-MS interfacing techniques have been used for the determination of carbamate pesticides and especially for the N-methylcarbamate carbofuran. This article addresses the difficulties encountered with the various types of LC-MS interface and discusses recent alternatives for the determination of carbofuran. With thermospray and particle beam interfaces the quantification of carbofuran is affected by both the ion source pressure and temperature, whereas quantification using the recently developed atmospheric pressure ionization interfaces, atmospheric pressure chemical ionization, electrospray, and ionspray, is less dependent on these parameters.     

Characterisation of botulinum toxins type C, D, E, and F by matrix-assisted laser desorption ionisation and electrospray mass spectrometry

In a follow-up of the earlier characterisation of botulinum toxins type A and B (BTxA and BTxB) by mass spectrometry (MS), types C, D, E, and F (BTxC, BTxD, BTxE, BTxF) were now investigated. Botulinum toxins are extremely neurotoxic bacterial toxins, likely to be used as biological warfare agent. Biologically active BTxC, BTxD, BTxE, and BTxF are comprised of a protein complex of the respective neurotoxins with non-toxic non-haemagglutinin (NTNH) and, sometimes, specific haemagglutinins (HA). These protein complexes were observed in mass spectrometric identification. The BTxC complex, from Clostridium botulinum strain 003-9, consisted of a 'type C1 and D mosaic' toxin similar to that of type C strain 6813, a non-toxic non-hemagglutinating and a 33 kDa hemagglutinating (HA-33) component similar to those of strain C-Stockholm, and an exoenzyme C3 of which the sequence was in full agreement with the known genetic sequence of strain 003-9. The BTxD complex, from C. botulinum strain CB-16, consisted of a neurotoxin with the observed sequence identical with that of type D strain BVD/-3 and of an NTNH with the observed sequence identical with that of type C strain C-Yoichi. Remarkably, the observed protein sequence of CB-16 NTNH differed by one amino acid from the known gene sequence: L859 instead of F859. The BTxE complex, from a C. botulinum isolated from herring sprats, consisted of the neurotoxin with an observed sequence identical with that from strain NCTC 11219 and an NTNH similar to that from type E strain Mashike (1 amino acid difference with observed sequence). BTxF, from C. botulinum strain Langeland (NCTC 10281), consisted of the neurotoxin and an NTNH; observed sequences from both proteins were in agreement with the gene sequence known from strain Langeland. As with BTxA and BTxB, matrix-assisted laser desorption/ionisation (MALDI) MS provided provisional identification from trypsin digest peptide maps and liquid chromatography-electrospray (tandem) mass spectrometry (LC-ES MS) afforded unequivocal identification from amino acid sequence information of digest peptides obtained in trypsin digestion.     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

Influence of the halogen ligand on the near-UV-visible spectrum of [Ru(X)(Me)(CO)2(alpha-diimine)] (X = Cl, I; alpha-diimine = Me-DAB, iPr-DAB; DAB = 1,4-diaza-1,3-butadiene): an ab initio and TD-DFT analysis

The near-UV-vis electronic spectroscopy of [Ru(X)(Me)(CO)(2)(iPr-DAB)] (X = Cl or I; iPr-DAB = N,N'-di-isopropyl-1,4-diaza-1,3-butadiene) is investigated through CASSCF/CASPT2 and TD-DFT calculations on the model complexes [Ru(X)(Me)(CO)(2)(Me-DAB)] (X = Cl or I). Convergence of the calculated transition energies for the low-lying metal-to-ligand charge-transfer (MLCT), X-to-ligand charge-transfer (XLCT, X halide ligand), or sigma-bond-to-ligand charge-transfer (SBLCT) to experimental values is analyzed for both methods. On the basis of these accurate calculations, it is shown that whereas the lowest singlet state can be assigned to a nearly pure XLCT state in [Ru(I)(Me)(CO)(2)(Me-DAB)], its character is mainly MLCT in [Ru(Cl)(Me)(CO)(2)(Me-DAB)]. These results are in agreement with time-resolved emission/IR and resonance Raman experimental data. The experimental UV-vis bands are well reproduced by the CASSCF/CASPT2 calculations. The TD-DFT transition energies to the long-range charge transfer states are dramatically affected by the nature of the functional, with lowering leading to meaningless values in the case of nonhybrid functionals. Both methods reproduce well the red shift of the absorption bands on going from the chloride to the iodide complex as well as the shift of the strongly absorbing higher MLCT transition from the visible to the UV domain of energy.     

Synthesis of New Spiropyrans With a Polyaromatic or Heteroaromatic Pendant and Their Photochromic Bedhaviors

A series of spiropyrans with a polyaromatic or heteroaromatic pendant was synthesized conveniently.Their photochromic behaviors were investigated with the aid of absorption spectral measurements.The results indicated that the compounds with the same parent spiropyran but different aromatic pendant show significantly different photochromic properties.This may be due to the π-π orbital interaction between the polyaromatic pendant and the open photomerocyanine form of spiropyran.The results obtained are very useful in the molecule design area.