A donor-acceptor substituted molecular motor: unidirectional rotation driven by visible light

A newly designed donor-acceptor substituted molecular motor 1 allows unidirectional rotation driven by visible light and shows some unique photophysical properties.     

CoSm(SeO3)2Cl,CuGd(SeO3)2Cl,MnSm(SeO3)2Cl,CuGd2(SeO3)4 und CuSm2(SeO3)4: Übergangsmetallhaltige Selenite von Samarium und Gadolinum

CoSm(SeO₃)₂Cl, CuGd(SeO₃)₂Cl, MnSm(SeO₃)₂Cl, CuGd₂(SeO₃)₄ and CuSm₂(SeO₃)₄: Transition Metal containing Selenites of Samarium and Gadolinum The reaction of CoCl₂, Sm₂O₃, and SeO₂ in evacuated silica ampoules lead to blue single crystals of CoSm(SeO₃)₂Cl (triclinic, , Z = 4, a = 712.3(1), b = 889.5(2), c = 1216.2(2) pm, α = 72.25(1)°, β = 71.27(1)°, γ = 72.08(1)°, R_all = 0.0586). If MnCl₂ is used in the reaction light pink single crystals of MnSm(SeO₃)₂Cl (triclinic, , Z = 2, a = 700.8(2), b = 724.1(2), c = 803.4(2) pm, α = 86.90(3)°, β = 71.57(3)°, γ = 64.33(3)°, R_all = 0.0875) are obtained. Green single crystals of CuGd₂(SeO₃)₂Cl (triclinic, , Z = 4, a = 704.3(4), b = 909.6(4), c = 1201.0(7) pm, α = 70.84(4)°, β = 73.01(4)°, γ = 70.69(4)°, R_all = 0.0450) form analogously in the reaction of CuCl₂ and Gd₂O₃ with SeO₂. CoSm(SeO₃)₂Cl contains [CoO₄Cl₂] octahedra, which are connected via one edge and one vertex to infinite chains. The Mn²⁺ ions in MnSm(SeO₃)₂Cl are also octahedrally coordinated by four oxygen and two chlorine ligands. The linkage of the polyhedra to chains occurs exclusively via edges. Both, the cobalt and the manganese compound show the Sm³⁺ ions in eight and ninefold coordination of oxygen atoms and chloride ions. In CuGd(SeO₃)₂Cl the Cu²⁺ ions are coordinated by three oxygen atoms and one Cl^— ion in a distorted square planar manner. One further Cl^— and one further oxygen ligand complete the [CuO₃Cl] units yielding significantly elongated octahedra. The latter are again connected to chains via two common edges. For the Gd³⁺ ions coordination numbers of ?8 + 1”? and nine were found. Single crystals of the deep blue selenites CuM₂(SeO₃)₄ (M = Sm/Gd, monoclinic, P2₁/c, a = 1050.4(3)/1051.0(2), b = 696.6(2)/693.5(1), c = 822.5(2)/818.5(2) pm, β = 110.48(2)°/110.53(2)°, R_all = 0.0341/0.0531) can be obtained from reactions of the oxides Sm₂O₃ and Gd₂O₃, respectively, with CuO and SeO₂. The crystal structure contains square planar [CuO₄] groups and irregular [MO₉] polyhedra.     

Inhibition effect of horehound (Marrubium vulgare L.) extract towards C38 steel corrosion in HCl solution

The corrosion inhibition properties of horehound (Marrubium vulgare L.) extract (HE) in 1 M hydrochloric acid medium was carried out using electrochemical methods (polarization curve and electrochemical impedance spectroscopy). Experiments were performed by concentration of the inhibitor and temperature effect. The results showed variation in inhibition performance of this plant extract. The Langmuir model was tested to describe the adsorption behavior of the inhibitor on the C38 steel surface. Some thermodynamic functions of dissolution processes were also determined.     

Melting of pentaerythritol tetranitrate (PETN) nanoconfined in controlled pore glasses (CPG)

The melting temperature depression of pentaerythritol tetranitrate, nanoconfined in controlled pore glasses (CPG), was systematically studied by differential scanning calorimetry (DSC). The solid–liquid interfacial energy σ _sl was obtained from the Gibbs–Thomson equation fit to melting temperature vs. reciprocal pore diameter. The pore size distribution of the CPG pores was also estimated from the DSC data. Pore sizes obtained from the manufacturer by BET are compared with those determined from the DSC curves using either the curves directly or by assuming spherical shaped confining cavities. The thermal mass vales are in better agreement with the BET estimation.     

Selective supramolecular assembly of multifunctional ligands on a Cu(111) surface: metallacycles, propeller trimers and linear chains

We studied the supramolecular assembly of a multifunctional ligand, cis-bis-terpyridine tetraphenyl ethylene, on a Cu(111) surface by low-temperature scanning tunneling microscopy (STM). Three distinctive supramolecular structures, metallacycles, propeller-shaped clusters and extended linear chains, are formed under specific assembly conditions owing to different inter-molecular binding modes of Cu-coordination, van der Waals interaction and hydrogen bonding, respectively.     

Experimental Determination of the Isotherm at 15°C of the System Mg2+/Cl?, SO42–H2O

 The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.     

Fourier transform ion cyclotron resonance mass spectrometry using atmospheric pressure photoionization for high-resolution analyses of corticosteroids

Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) was coupled with atmospheric pressure photoionization (APPI) for the first time and used for the analysis of several corticosteroids.1 The analytes showed excellent response using APPI when compared with both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). APPI has the advantage of requiring less heat for desolvation, resulting in less thermal degradation of the analytes and higher signal-to-noise than APCI. In terms of ultimate sensitivity, APPI is more efficient than either ESI or APCI for the analysis of corticosteroids. With some compounds, the high-resolution capability of FTICRMS was necessary to obtain an accurate mass due to contributions of the M(+.) (13)C isotope in the [M+H](+) ion peak.     

Preserving the chromatographic integrity of high-speed supercritical fluid chromatography separations using time-of-flight mass spectrometry

The advantage of high-speed time-of-flight-mass spectrometry (TOF-MS) detection for ultrafast qualitative supercritical fluid chromatography/mass spectrometry (SFC/MS) applications allows the superior resolving power of SFC to be exploited in high-throughput analysis. A chromatographic comparison of quadrupole MS and TOF-MS shows high-speed TOF total ion current data point sampling to be more indicative of fast SFC separations and corresponding short (1-2 s) baseline peak widths. Results shown for analysis of a six-compound mixture with two peaks eluting at 0.86 and 0.89 min exhibit >50% resolution by high-speed TOF data sampling, whereas the same peaks appear to coelute using quadrupole MS data sampling. Additionally, a marked improvement in the peak baseline widths is afforded by fast TOF data acquisition of 0.1 s/spectrum, resulting in a reduction in the baseline width, 1.6 s, of sulfanilamide in a four-compound mixture that is more than 2-fold greater than that achieved at the slower data acquisition of 0.5 s/spectrum. The resulting increase in resolution and improved peak shapes allow automatic integration routines to perform more effectively. For most classes of compounds amenable to high performance liquid chromatography, including druglike species, steroids, and polymers, the union of SFC with TOF-MS provides the maximum density of chemical information per unit time available with any high-speed chromatographic/mass spectrometric method.     

Unclicking of thioureas: Base catalyzed elimination of anilines and isothiocyanates from thioureas

Bisaromatic thioureas are widely used in e.g. asymmetric organocatalysis and considered to be robust compounds. Herein we show, in strong contrast to common notion, that thioureas dissociate to amines and isothiocyanates in a base catalyzed reaction under mild conditions. This ‘unclicking’ process can occur in the presence of weak organic bases even at moderate temperatures. The influence of the substituents at the aromatic rings of the thiourea on the regioselectivity of this unclicking process is also shown.     

AIEgens in cell-based multiplex fluorescence imaging

Fluorescence imaging is an important branch of bioimaging. It is non-invasive and provides superior spatial and temporal resolution during the real-time monitoring of biological samples of interest. Although the spatial resolution limit of optical microscopes is about 200 nm, due to the diffraction limit, with the application of super-resolution fluorescence microscopy technologies this limit has been pushed below 30 nm. This makes it feasible to visualize biological structures in subcellular levels and to monitor subcellular biological processes in real time. However, due to the complexity of the biological structure and components within cells, simultaneous staining and monitoring multiple intracellular components with different coloured fluorophores is often needed during multiplex imaging, to better understand biological processes. Aggregation-induced emission luminogens(AIEgen) and AIEgen based nanoparticles(NPs) have presented many advantages in fluorescence imaging, with strong potential for biological science and nano-medicine. Herein this review, we focus on the advantages of AIEgen and AIEgen NP in cell-based fluorescence imaging, and the latest advances of AIEgens in cell-based multiplex imaging are summarized and discussed. The future perspectives are proposed.