Functionalization through lithiation of (S)-N-(1-phenylpropyl)-2-phenylquinoline-4-carboxamide. Application to the labeling with carbon-11 of NK-3 receptor antagonist SB 222200

Lithiation of (S)-N-(1-phenylpropyl)-2-phenylquinoline-4-carboxamide with the complex n-BuLi/TMEDA (1/1 molar ratio) in THF at -60 degrees C for 5 h occurred selectively at the position 3 of the quinoline ring. This selectivity was shown by the absence of racemization of the stereogenic center and the formation of the corresponding functionalized quinolines in 59-74% yield by subsequent reaction with an electrophile at -60 degrees C for 1 h. The 3-trimethylstannyl derivative was subjected to a Stille reaction using methyl, phenyl, or thienyliodide to afford the alkyl or aryl quinolines in moderate to good yields. This methodology was successfully applied to the radiosynthesis of [11C]SB 222200 using methyl iodide labeled with carbon-11 (beta+ emitter, t1/2=20.4 min) for the in vivo study of NK-3 receptor by positron emission tomography (48-58% radiochemical yields from [11C]CH3I, decay corrected, 45 min total synthesis time).     

Investigating comprehensive two-dimensional gas chromatography conditions to optimize the separation of oxygenated compounds in a direct coal liquefaction middle distillate

Considering the global energetic context, diversifying fuels is of growing importance and many new alternatives are promising. Coal liquefaction products definitely appear among the new generation substitutes. These product's characteristics are very far from fuel specifications as they are mainly composed of naphthenes, aromatics, polycondensed naphthenic and aromatic structures and heteroatomic compounds (nitrogen and oxygen), with a very low paraffin content. Identification and quantification of oxygen-containing species in coal-derived liquids are of considerable importance to understand their behaviors in further processing. However, these species have not been characterized as fully as the predominant hydrocarbon components. Literature shows that these compounds consist mainly in alkylated phenolic and furanic structures. Therefore, comprehensive two-dimensional gas chromatography has been investigated to provide enhanced molecular characterization of these complex samples. Several different configurations involving innovative column configurations were tested. Each of them was optimized by testing different column lengths, modulation periods, and oven conditions. A comparison of the contribution of each column configuration was carried out regarding four main criteria: individual separation of oxygenates, group type separation, resolution, and space occupation. One of them enabled an outstanding separation of paraffins, naphthenes, monoaromatics, diaromatics and targeted O-compounds in a direct coal liquefaction product. It was therefore subjected to further experimentations using a time-of-flight mass spectrometer to validate the identification and unravel more than fifty oxygenated molecular structures. A group-type quantification was also established for four column arrangements and gives the distribution of paraffins, naphthenes and aromatics. It can be concluded from this study that a non-orthogonal arrangement involving a highly polar column in the first dimension was the most adapted one.     

Comparison of different statistical approaches to evaluate the orthogonality of chromatographic separations: application to reverse phase systems

Selectivity of phase system is of primary concern when designing a bidimensional chromatographic system and looking for the highest degree of orthogonality between the two separations. Several statistical or geometrical criteria can potentially be used to measure the degree of orthogonality. A comparison of eight candidate criteria has been carried out in this study. Analysis of variance (ANOVA) was used to evaluate the relevance of each criterion and its ability to reveal the significance of the influence of factors like pH, stationary phase, and organic modifier. Experimentally, a set of 32 chromatographic systems was evaluated by the same generic gradient with 63 probe solutes, likely to be present in biological and/or environmental samples and covering a wide range of physico-chemical properties: acidic, basic and neutral compounds with different pKa, molecular mass and hydrophobicity (logP). Each chromatographic system was defined by the nature of the stationary phase (8 different silica or grafting chemistries), the pH of the aqueous fraction of the mobile phase (2.5 or 7.0) and the nature of the organic modifier (acetonitrile or methanol). The orthogonality of the 496 couples of chromatographic systems was evaluated and ranked using the eight different approaches: the three correlation coefficients (Pearson, Spearman and Kendall), two geometric criteria characterizing the coverage of the 2D separation space, Slonecker's information similarity and two chi-square statistics of independence between normalized retention times. In fact, there were only seven distinct criteria, since we established the analytical equivalence between the rankings with the likelihood ratio statistics and Slonecker's information similarity. Kendall's correlation coefficient appeared to be the best measure of orthogonality since, according to ANOVA, it exhibited the highest sensitivity to all experimental factors. The chi-square measures, and hence Slonecker's information similarity, performed equally well provided the discretization of the separation space was carried out appropriately. Finally, from the compared study of the factors acting upon orthogonality carried out by ANOVA, it is possible to draw the conclusion that the pH of the mobile phases has the highest impact on the selectivity followed by the type of stationary phase and finally by the organic modifier.     

Using comprehensive two-dimensional gas chromatography for the analysis of oxygenates in middle distillates I. Determination of the nature of biodiesels blend in diesel fuel

In the current energetic context (increasing consumption of vehicle fuels, greenhouse gas emission etc.) government policies lead to mandatory introduction in fossil fuels of fuels resulting from renewable sources of energy such as biomass. Blending of fatty acid alkyl esters from vegetable oils (also known as biodiesel) with conventional diesel fuel is one of the solutions technologically available; B5 blends (up to 5%w/w esters in fossil fuel) are marketed over Europe. Therefore, for quality control as well as for forensic reasons, it is of major importance to monitor the biodiesel origin (i.e. the fatty acid ester distribution) and its content when it is blend with petroleum diesel. This paper reports a comprehensive two-dimensional gas chromatography (GC x GC) method that was developed for the individual quantitation of fatty acid esters in middle distillates matrices. Several first and the second dimension columns have been investigated and their performances to achieve (i) a group type separation of hydrocarbons and (ii) individual identification and quantitation of fatty acid ester blend with diesel are reported and discussed. Finally, comparison of quantitative GC x GC results with reference methods demonstrates the benefits of GC x GC approach which enables fast and reliable individual quantitation of fatty acid esters in one single run. Results show that under developed chromatographic conditions, quantitative group type analysis of hydrocarbons is also possible, meaning that simultaneous quantification of hydrocarbons and fatty acid esters can be achieved in one single run.     

Transient isotachophoresis in carrier ampholyte-based capillary electrophoresis for protein analysis

Transient ITP (t-ITP) has been used in carrier ampholyte-based CE (CABCE) to enhance the sensitivity of protein analysis. The characteristics of carrier ampholytes (CAs) narrow pH cuts-based buffers, when used as BGEs in CE are compatible with t-ITP requirements. Indeed, being the sole buffering species of such solutions, CAs impose a pH close to their pI. Thus, in these solutions, the CAs possess low electrophoretic mobility. As a consequence, by adding an ionic component with high electrophoretic mobility either in the studied sample or in the BGE, a t-ITP step can be generated. This has first been demonstrated for protein test mixtures. Then, the combination of t-ITP with CABCE has been applied to study a real sample, the bovine milk.     

Evaluation of reversed phase columns designed for polar compounds and porous graphitic carbon in "trapping" and separating neurotransmitters

Quantification of neurotransmitters as biologically active analytes in neurological samples is of high interest for studying their effect on multiple targets. This work is part of a strategy involving two-dimensional liquid chromatography (2D LC) system with mass spectrometry (MS) detection. The concept of the on-line LC system is the coupling of reversed phase liquid chromatography (RPLC, the second separation dimension) to ion-exchange chromatography (IEC, the first dimension). Our objective in this study is to find the appropriate second dimension column, ensuring that samples of neurotransmitters are refocused and separated on it. Silica-based columns designed specifically to retain polar compounds were tested in LC conditions and compared with results obtained with a porous graphitic carbon (PGC, Hypercarb) column. These polar embedded, polar endcapped, and high-density alkyl chain columns successfully separated analytes in question using mobile phase systems with high percentage of water, or even pure water. Only Hypercarb column provided efficient retention of the most polar neurotransmitters and could be used for trapping and preconcentrating the compounds without rapid breakthrough.     

Selective immunoclean-up followed by liquid chromatography for the monitoring of a biomarker of exposure to polycyclic aromatic hydrocarbons in urine at the ng l-1 level

A selective clean-up procedure using an immunosorbent (IS) was developed for the trace-level determination, in water and urine samples, of 3-benzo(a)pyrene-glucuronide (3-BP-G), a biomarker of exposure to carcinogenic polycyclic aromatic hydrocarbons (PAHs). First, three sorbents used for the immobilization of antibodies were evaluated for their ability to limit the risk of non-specific interactions and to provide a high bonding density. The best sorbent, i.e. sepharose, was used for the immobilization of two different monoclonal antibodies. The most specific antibody for 3-BP-G was applied to the selective extraction from urine providing a clean extract, an easy and reliable quantification by comparison with a classical SPE process. The sensitivity of the fluorescence associated with the selectivity of the IS provides a limit of detection up to 1.2 ng l(-1) in urine for 3-BP-G.     

Oxidation of aromatic lithium thiolates into sulfinate salts: an attractive entry to aryl sulfones labeled with carbon-11

[reaction: see text] Aromatic 11C-sulfones were synthesized by S alkylation of lithium arenesulfinates, which are readily available from the corresponding thiols by an oxaziridine-mediated oxidation reaction with [11C]alkyl iodides in THF/H2O (4:1) at 150 degrees C. The radiosyntheses, including purification by HPLC, were completed in an average of 35 min from the end of the bombardment with 55-76% overall radiochemical yields (decay corrected). The described procedure extends the range of accessible labeling methods.