排序方式: 共有65条查询结果,搜索用时 15 毫秒
11.
H. B. Ouici O. Benali Y. Harek L. Larabi B. Hammouti A. Guendouzi 《Research on Chemical Intermediates》2013,39(6):2777-2793
A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor. 相似文献
12.
A. Zarrouk H. Zarrok R. Salghi B. Hammouti R. Touir I. Warad F. Bentiss H. Abou El Makarim N. Benchat 《Research on Chemical Intermediates》2013,39(3):1279-1289
The efficiency of 1H-1,2,4-triazol-3-amine (Tz1), 4-amino-3-hydrazino-4H-1,2,4-triazole-3-thiol (Tz2), and 1H-1,2,4-triazole-3,5-diamine (Tz3) as inhibitors of corrosion of copper in nitric acid was investigated by use of density functional theory (DFT). Quantum chemical data, for example energy of the highest occupied molecular orbital (E HOMO), energy of the lowest unoccupied molecular orbital (E LUMO), energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), fraction of electrons transferred from the inhibitor molecules to the metallic atom (ΔN), and total energy (TE), were calculated. All calculations were performed by use of DFT with Gaussian 03W software. A good correlation was found between theoretical data and experimental results. 相似文献
13.
Ismail Warad Maha Al-Ali Belkheir Hammouti Taibi Ben Hadda Rami Shareiah Mohamed Rzaigui 《Research on Chemical Intermediates》2013,39(6):2451-2461
A novel di-μ-chloro-bis[chloro(4,7-dimethyl-1,10-phenanthroline)cadmium(II)] dimer complex has been prepared by reacting CdCl2·2.5H2O with 4,7-dimethyl-1,10-phenanthroline (dmphen) ligand. The complex was characterized on the basis of elemental analysis, FAB-MS, IR, UV–visible, 1H, and 13C NMR spectroscopy, TG/DTA, and X-ray single-crystal diffraction studies. The Cd(II) ions in [CdCl2(C14H12N2)]2 are coordinated to three Cl atoms with the centrosymmetric dimer bridged through the Cl atoms and two N atoms in a slightly distorted square-pyramidal disposition. Several hydrogen bonds formed between the terminal Cl atoms and H-Me/H-Ph groups may stabilize the structure in the dimer form. 相似文献
14.
K. Barouni A. Kassale L. Bazzi R. Salghi B. Hammouti A. Albourine S. El Issami O. Jbara M. Bouachrine 《Research on Chemical Intermediates》2014,40(3):991-1002
Inhibition of corrosion of copper in 1M HNO3 solution by four amino acids, proline (Pro), phenylalanine (Phe), tyrosine (Tyr), and tryptophan (Try), has been studied by use of gravimetric and electrochemical polarization measurements. The results obtained the from two different techniques are comparable, and show that Tyr and Try act as good inhibitors of corrosion of copper in 1 mol L?1 HNO3. Correlation between inhibition efficiency and quantum chemical calculations, performed using semi empirical (AM1 and MNDO) and ab-initio methods, is discussed. 相似文献
15.
A. Ousslim K. Bekkouch A. Chetouani E. Abbaoui B. Hammouti A. Aouniti A. Elidrissi F. Bentiss 《Research on Chemical Intermediates》2014,40(3):1201-1221
The present study describes the inhibition effect of 4-benzyl piperidine (P1), 1,6-bis(4-benzylpiperidine-1-carboxamide)hexane (P2) and bis(4-benzylpiperidine)thiuram disulfide (P3) towards the corrosion of mild steel in 5.5 M H3PO4 solution using weight loss measurements and polarization technique. The influence of inhibitor concentration and temperature on the inhibitory behavior of P2 and P3 was investigated. Meanwhile, the inhibition efficiency (IE) was found to depend on the molecule structure and the concentration of piperidine derivatives. The IE for 10?3 M P2 and P2 in 5.5 M H3PO4 is around 90 %. Polarization studies clearly revealed that all the compounds used act as mixed-type inhibitors. Adsorption isotherms were fitted by the Langmuir isotherm. Adsorption energies ( $ \Updelta {\text{G}}^\circ_{\text{ads}} $ and $ \Updelta {\text{H}}^\circ_{\text{ads}} $ ) and kinetic parameters were evaluated. Significant correlations are obtained between inhibition efficiency with the calculated chemical indexes, indicating that the variation of inhibition with structure of the inhibitor may be explained in terms of electronic properties. 相似文献
16.
Abdessamade Benahmed Khalil Azzaoui Abderahmane El Idrissi Hammouti Belkheir Said Omar Said Hassane Rachid Touzani Larbi Rhazi 《Molecules (Basel, Switzerland)》2022,27(4)
The need for biodegradable and biocompatible polymers is growing quickly, particularly in the biomedical and environmental industries. Cellulose acetate, a natural polysaccharide, can be taken from plants and modified with polycaprolactone to improve its characteristics for a number of uses, including biomedical applications and food packaging. Cellulose acetate-g-polycaprolactone was prepared by a three-step reaction: First, polymerization of ε-caprolactone via ring-opening polymerization (ROP) reaction using 2-hydroxyethyl methacrylate (HEMA) and functionalization of polycaprolactone(PCL) by introducing NCO on the hydroxyl end of the HEMA-PCL using hexamethyl lenediisocyanate(HDI) were carried out. Then, the NCO–HEMA-PCL was grafted onto cellulose acetate (using the “grafting to” method). The polycaprolactone grafted cellulose acetate was confirmed by FTIR, the thermal characteristics of the copolymers were investigated by DSC and TGA, and the hydrophobicity was analyzed via water CA measurement. Introducing NCO-PCL to cellulose acetate increased the thermal stability. The contact angle of the unreacted PCL was higher than that of cellulose acetate-g-PCL, and it increased when the chain length increased. The CA-g-PCL50, CA-g-PCL100, and CA-g-PCL200 showed very high inhibition zones for all three bacteria tested (E. coli, S. aureus, and P. aeruginosa). 相似文献
17.
M. Mihit M. Bouklah B. Hammouti E. Ait Addi S. Kertit 《Applied Surface Science》2006,252(6):2389-2395
The effect of the addition of some tetrazolic type organic compounds: 1-phenyl-5-mercapto-1,2,3,4-tetrazole (PMT), 1,2,3,4-tetrazole (TTZ), 5-amino-1,2,3,4-tetrazole (AT) and 1-phenyl-1,2,3,4-tetrazole (PT) on the corrosion of brass in nitric acid is studied by weight loss, polarisation and electrochemical impedance spectroscopy (EIS) measurements. The explored methods gave almost similar results. Results obtained reveal that PMT is the best inhibitor and the inhibition efficiency (E%) follows the sequence: PMT > PT > AT > TTZ. Polarization measurements also indicated that tetrazoles acted as mixed-type inhibitors without changing the mechanism of the hydrogen evolution reaction. Partial π-charge on atoms has been calculated. Correlation between the highest occupied molecular orbital energy EHOMO and inhibition efficiencies was sought. The adsorption of PMT on the brass surface followed the Langmuir isotherm. Effect of temperature is also studied in the (25-50 °C) range. 相似文献
18.
K. Tebbji H. Oudda B. Hammouti M. Benkaddour S. S. Al-Deyab A. Aouniti S. Radi A. Ramdani 《Research on Chemical Intermediates》2011,37(8):985-1007
The effect of some prepared compounds, namely 3,5-dimethyl-1H-pyrazole (P1), 3(5)-amino-5(3)-methylpyrazole (P2), and 1′,3,5,5′-tetramethyl-1′H-1,3′-bipyrazole (P3), on the corrosion behaviour of steel in 1.0 M hydrochloric acid solution as corrosive medium has been investigated at 308 K using weight-loss measurement, potentiodynamic
polarisation, linear polarisation, and impedance spectroscopy (EIS). Generally, inhibition efficiency of the investigated
compounds was found to depend on the concentration and nature of the inhibitor. P3 was a better inhibitor than P1 and P2,
and its inhibition efficiency increased with increasing concentration of inhibitor, attaining 94% above 10−3
M. Potentiodynamic polarisation studies clearly reveal that P3 acts essentially as a cathodic inhibitor. E (%) values obtained from different methods are in reasonably good agreement. EIS measurements show an increase of transfer
resistance with inhibitor concentration. Partial π-charge on atoms was calculated. Correlation between the highest occupied
molecular orbital energy E
HOMO and inhibition efficiencies was sought. The temperature effect on the corrosion behaviour of steel in 1.0 M HCl without and with different concentrations of inhibitor P3 was studied in the temperature range 308 to 343 K. Thermodynamic
data, for example heat of adsorption (
\Updelta H\textads° \Updelta H_{\text{ads}}^{^\circ } ), entropy of adsorption (
\Updelta S\textads° \Updelta S_{\text{ads}}^{^\circ } ) and free energy of adsorption (
\Updelta G\textads° \Updelta G_{\text{ads}}^{^\circ } ) were calculated by use of thermodynamic equations. Kinetic activation data, for example E
a, ΔH*, ΔS* and pre-exponential factor, were calculated, and are discussed. The inhibiting action of P3 on the corrosion of steel in
1–10 M hydrochloric acid was also studied by weight-loss measurement. The rate constant and reaction constant were calculated for
the corrosion reactions. Adsorption of P3 on the steel surface in 1.0 M HCl follows the Langmuir isotherm model. 相似文献
19.
A. Zarrouk B. Hammouti H. Zarrok S. S. Al-Deyab I. Warad 《Research on Chemical Intermediates》2012,38(7):1655-1668
N-1-Naphthylethylenediamine dihydrochloride monomethanolate (N-NEDHME) was tested as a corrosion inhibitor for copper in 2 M HNO3 solution using the standard gravimetric technique at 303–343 K. N-NEDHME acts as an inhibitor for copper in an acidic medium. Inhibition efficiency increases with increase in concentration of N-NEDHME but decreases with a rise in temperature. Thermodynamic parameters such as adsorption heat ( $ \Updelta H_{\text{ads}}^\circ $ ), adsorption entropy ( $ \Updelta S_{\text{ads}}^\circ $ ) and adsorption free energy ( $ \Updelta G_{\text{ads}}^\circ $ ) were obtained from experimental data of the temperature studies of the inhibition process at five temperatures ranging from 303 to 343 K. Kinetic parameters activation such as $ E_{a} $ , $ \Updelta H_{\text{a}}^\circ $ , $ \Updelta S_{\text{a}}^\circ $ and pre-exponential factors have been calculated and are discussed. Adsorption of N-NEDHME on the copper surface in 2 M HNO3 follows the Langmuir isotherm model. 相似文献
20.
N. Boussalah S. Ghalem S. El Kadiri B. Hammouti R. Touzani 《Research on Chemical Intermediates》2012,38(8):2009-2023
Corrosion inhibition of copper through six bipyrazolic compounds has been elucidated by means of density functional theory (DFT)-derived reactivity indexes. The DFT calculated parameters and experimental corrosion inhibition efficiency (IE%) indicate that their inhibition effect is closely related to the frontier orbital energies, polarizability, electronic chemical potential and global nucleophilicity. The quantum chemistry calculations were performed at the B3LYP/6-31G (d) level. The theoretical results, predicted using DFT-based reactivity indexes, are in good agreement with experimental outcomes. 相似文献