The variational iteration method for solitary patterns solutions of gBBM equation

We consider solitary patterns solutions of generalized Benjamin–Bona–Mahony equations (shortly gBBM). The variational iteration method (shortly VIM) is applied for the numerical solution subject to appropriate initial condition. The numerical solutions of our model equation are calculated in the form of convergence power series with easily computable components. The VIM performs extremely well in terms of accuracy, efficiently, simplicity, stability and reliability.     

Improvement of pour point and oxidative stability of synthetic ester basestocks for biolubricant applications

For environmental reasons, as well as the dwindling source of petroleum, a new class of environmentally acceptable and renewable biolubricants based on plant oils is available. Even though plant oils possess excellent lubricant-related properties, there are some concerns about using it as biolubricant base oil. In this study we present a series of structures derived from oleic acid to be used as synthetic biolubricant basestocks. Measuring of pour point (PP), flash point, viscosity index (VI), oxidation onset temperature (OT) and signal maximum temperature (SMT) was carried out for each compound. Furthermore, the friction and wear properties were measured using a high-frequency reciprocating rig (HFRR). The resulting product structures were confirmed by NMR and FTIR spectroscopic analysis. The results showed that ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate with behenyl mid-chain ester exhibited the most favorable low temperature performance (PP ?48 °C) and ethylhexyl 9-(octanoyloxy)-10-(octyloxy)octadecanoate octyl mid-chain ester exhibited higher oxidation stability (OT 142 °C) than the other synthetic ester oils. On the other hand, the highest ball wear scan diameter was obtained for ethylhexyl 9-(octanoyloxy)-10-(behenoxy)octadecanoate while the lowest value was obtained for 9-hydroxy-10-octyloxyoctadecanoic acid. Overall, it was concluded that these synthetic ester oils have potential in formulation of industrial fluids for different temperature applications.     

Conversion of carbon dioxide to cyclic carbonates using diimine Ru(II) complexes as catalysts

Cationic diimine Ru(II) complexes were synthesized and tested as catalysts for the formation of cyclic organic carbonates from CO₂ and liquid epoxides (propylene oxide, epichlorohydrine, 1,2‐epoxybutane and styrene oxide) which served as both reactant and solvent. The reaction rates not only depended on the type of ligand, but also on reaction conditions such as temperature, pressure, base, the epoxide substrates and the use of an additional solvent. Reaction rates in terms of turnover frequencies up to 4050 mol_product mol_cat.^?1 h^?1 at 99% selectivity were achieved by optimizing the diimine ligand as well as the reaction temperature and CO₂ pressure. Consistent with CV measurements, the electron donating group on the p‐position of the aryl ring accelerated the reaction rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Linear and Nonlinear Optical Properties in Spherical Quantum Dots

We calculate the energy eigenvalues and the sate functions of one-electron Quantum Dot （QD） by using a combination of Quantum Genetic Algorithm （QGA） and Hartre-Fock-Roothaan （HFR） method. The linear and the third-order nonlinear optical absorption coefficients for the 1s-1p, 1p-1d, and 1d-1f transitions are examined as a function of the incident photon energy for three different values of the stoichiometric ratio. The results show that the stoichiometric ratio, impurity, relaxation time, and dot size have great influence on the optical absorption coefficients of QDs.     

Mass attenuation coefficients for n-type InSe, InSe:Gd, InSe:Ho and InSe:Er single crystals

Measurements have been made to determine the mass attenuation coefficients of undoped n-type InSe, and Gd, Ho, Er doped n-InSe single crystals using a Si(Li) detector in the energy region 15.746–40.930 keV X-ray energies with energy dispersive X-ray fluorescence systems. InSe, InSe:Gd, InSe:Ho and InSe:Er single crystals were grown by using the stockbarger method. The measured values are graphically compared with the theoretical ones obtained using WinXcom.     

Rhodium-catalyzed carbonylative arylation of alkynes with arylboronic acids: an efficient and straightforward method in the synthesis of 5-aryl-2(5H)-furanones

5-Aryl-2(5H)-furanones can be synthesized by the Rh-catalyzed reactions of arylboronic acids with internal alkynes under a CO atmosphere.     

Selective palladium-catalyzed arylation(s) of benzaldehyde derivatives by N-heterocarbene ligands

The 2- or 2,6-position(s) of aromatic aldehydes were directly and selectively arylated with aryl chlorides or bromides in the presence of a catalytic system prepared in situ from Pd(OAc)₂, imidazolinium chlorides (1-5) and Cs₂CO₃.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Palladium(II)?NHC complexes containing benzimidazole ligand as a catalyst for C?N bond formation

The reaction of 2‐(2‐bromoethyl)‐1,3‐dioxane with 1‐alkylbenzimidazole derivatives results in the formation of the new benzimidazolium salts (1). The reaction of Pd(OAc)₂ with 1,3‐dialkylbenzimidazolium salts (1a–c) yields palladium N‐heterocyclic carbene (NHC) complexes (2a–c). All synthesized compounds were characterized by ¹H NMR, ¹³ C NMR, IR and elemental analysis techniques which support the proposed structures. As catalysts, these new palladium complexes offer a simple and efficient methodology for the synthesis of triarylamines and secondary amines from anilines and amines and in a single step with potassium tertiary butoxide as a base. Copyright © 2010 John Wiley & Sons, Ltd.