A continuous vibration theory for rotors with an open edge crack

In this paper a new continuous model for flexural vibration of rotors with an open edge crack has been developed. The cracked rotor is considered in the rotating coordinate system attached to it. Therefore, the rotor bending can be decomposed in two perpendicular directions. Two quasi-linear displacement fields are assumed for these two directions and the strain and stress fields are calculated in each direction. Then the final displacement and stress fields are obtained by composing the displacement and stress fields in the two directions. The governing equation of motion for the rotor has been obtained using the Hamilton principle and solved using a modified Galerkin method. The free vibration has been analyzed and the critical speeds have been calculated. Results are compared with the finite element results and an excellent agreement is observed.     

Elongation improvement in nano bainite steel obtained from plastically deformed primary austenite

ABSTRACT

Ausforming is being widely used to overcome the kinetics barrier in nanostructured bainitic steels and to enhance its practical industrial applications. It would also affect the microstructural characteristics and consequently the resultant mechanical performance. This article aims to investigate the tensile behaviour of nano bainite obtained from plastically deformed primary austenite at three different heat treatment stages. 10% of ausforming has been implemented and nanostructured bainite obtained after austempering at 300°C for 2, 4 and 6?h in salt bath furnaces. Results indicated that ausforming could successfully increase the volume fraction of bainite within the microstructure and refine the bainite packets sizes. Moreover, it has been demonstrated that higher mechanical stability of retained austenite and therefore more effective TRIP effect could be attained during the tensile test which consequently resulted in elongation improvement without deteriorating the strength properties. This claimed to be beneficial for materials performance during practical applications.     

Improved visible light photocatalytic activity of TiO<Subscript>2</Subscript> nano powders with metal ions doping for glazed ceramic tiles

Self-cleaning and anti-bacterial activities of the photo-catalyst titanium dioxide make it a superior compound for use in the ceramics and glass industry. In order to achieve high self-cleaning efficiency for building products, it is important that Titania is present as anatase phase. Moreover, it is desirable that the particle sizes are in Nano-range, so that a large enough surface area is available for enhanced catalytic performance. In the present paper, Cobalt and Nickel co-doped (4%mol Ni and 4%mol Co doped TiO₂) and un-doped TiO₂ Nano powders have been prepared by sol–gel technique. They were calcined at the temperatures in the range of 475–1075 °C. Ni/Co co-doped TiO₂ postponed the anatase to rutile transformation of TiO₂ by about 200–300°C, such that before calcination at 775°C, no rutile was detected for 4 mol% Ni/Co co-doped TiO₂. A systematic decreasing on crystallite size and increasing on specific surface area of Ni/Co co-doped TiO₂ were observed. Photo-catalytic activity of anatase polymorph was measured by the decomposition rate of methylene blue under visible light. The results showed enhanced catalysis under visible light for Ni/Co co-doped TiO₂ as compared to pure TiO₂. The enhanced performance was attributed to surface chemistry change associated with a slight shift in the band gap. Depending on the temperatures ranging from 475 to 1075 °C, band gap energy of Ni and Co doped TiO₂ crystals decreased. For all samples there is a general reduction of the band gap energy from 3.00 to 2.96 eV.     

The design of bells with harmonic overtones

Musical bells have had limited application due to the presence of inharmonic partials in the lower part of their acoustic spectra. A series of bells has been designed that contains up to seven partial frequencies in the harmonic series beginning at the fundamental frequency. This was achieved by choosing geometries for finite-element analysis models in which as many purely circumferential bending modes as possible occurred at frequencies below any mode with an axial ring node. The bell models were then fine tuned using gradient projection method shape optimization and the resulting profiles were cast in silicon bronze. A range of bell geometries and timbres is analyzed using psycho-acoustic models and is discussed in relation to European carillon bells.     

The Efficient Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones and Their Sulfur Derivatives with H2SO4 Immobilized on Activated Charcoal

Abstract

Various 3,4-dihydropyrimidin-2-(1H)-ones (DHPMs) and their sulfur derivatives were efficiently synthesized by a one-pot cyclocondensation reaction of aromatic and aliphatic aldehydes, β-dicarbonyl compounds and urea (or thiourea) in the presence of sulfuric acid immobilized on activated charcoal (133% w/w). The reactions were carried out in refluxing n-hexane-acetonitrile (2.5:0.5 mL) within 5–150 min to give 3,4-dihydropyrimidinones (or thiones) in high to excellent yields (81–97%).     

conversion of trimethylsilyl ethers to acetyl or formyl esters with TiCl4

A simple method is described for the efficient conversion of trimethylsilyl ethers to their corresponding acetyl and formyl esters in refluxing ethyl acetate or ethyl formate in the presence of TiCl₄.     

Efficient Synthesis of Bicyclo[3.3.1]nonane Systems via Tandem 1,3-Dinucleophilic Addition of 4-Hydroxy-2-quinolinones to Quinolinium Salts

The synthesis of bicyclo[3.3.1]nonane systems is reported. The synthesis is based on the tandem 1,3-dinucleophilic addition of 4-hydroxy-2-quinolinone to quinolinium salts.     

Spectroscopic analysis of the interaction between Co3O4 nanoparticles and acid phosphatase

Monatshefte für Chemie - Chemical Monthly - In this study, the structure and stability of acid phosphatase in its interaction with Co3O4 nanoparticles are evaluated through absorbance, enzyme...     

A spatio-temporal dynamic regression model for extreme wind speeds

This paper presents a hierarchical regression type model for analyzing the dependency of sample extremes on time, space and a covariate effect. The model is based on the assumption that the observations follow independently a generalized extreme value distribution given location, scale and shape parameters. Then a multivariate spatial process is considered to accommodate the association and spatial correlation in the distribution parameters. The mean of the process incorporates the underlying dynamics which is elaborated on the lower stage of hierarchy. Finally, three spatio-temporal dynamic linear models drive independently this mean function to take the variations in the parameters separately into account. In a Bayesian setting, the model structure leads to parallel implementation of the Markov chain Monte Carlo algorithm in a sense that it is less time consuming. Our methodology is applied to the monthly maxima of wind speed with temperature as a covariate for which the relationship is expressed in terms of a penalized spline regression model. The comparison of the proposed model with several simpler ones suggests considerable improvements in wind speed analysis.